[PATCH] ARM: OMAP2: twl-common: fix compiler warnings

[PATCH] ARM: OMAP2: twl-common: fix compiler warnings

[Tero Kristo]

OMAP2 does not use the external voltage controller code for TWL, and
thus OMAP2 only compilation generates following warnings:

arch/arm/mach-omap2/twl-common.c:51: warning: 'twl_set_voltage' defined but not used
arch/arm/mach-omap2/twl-common.c:57: warning: 'twl_get_voltage' defined but not used

This patch moves the code in question behind ARCH specific flags and
eliminates these warnings.

Reported-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
 arch/arm/mach-omap2/twl-common.c |    2 ++
 1 files changed, 2 insertions(+), 0 deletions(-)

diff --git a/arch/arm/mach-omap2/twl-common.c b/arch/arm/mach-omap2/twl-common.c
index 119d5a9..5447c13 100644
--- a/arch/arm/mach-omap2/twl-common.c
+++ b/arch/arm/mach-omap2/twl-common.c
@@ -48,6 +48,7 @@ static struct i2c_board_info __initdata omap4_i2c1_board_info[] = {
 	},
 };
 
+#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4)
 static int twl_set_voltage(void *data, int target_uV)
 {
 	struct voltagedomain *voltdm = (struct voltagedomain *)data;
@@ -59,6 +60,7 @@ static int twl_get_voltage(void *data)
 	struct voltagedomain *voltdm = (struct voltagedomain *)data;
 	return voltdm_get_voltage(voltdm);
 }
+#endif
 
 void __init omap_pmic_init(int bus, u32 clkrate,
 			   const char *pmic_type, int pmic_irq,
-- 
1.7.4.1

[PATCH] ARM: OMAP2: twl-common: fix compiler warnings

[Paul Walmsley]

On Thu, 28 Jun 2012, Tero Kristo wrote:

> OMAP2 does not use the external voltage controller code for TWL, and
> thus OMAP2 only compilation generates following warnings:
> 
> arch/arm/mach-omap2/twl-common.c:51: warning: 'twl_set_voltage' defined but not used
> arch/arm/mach-omap2/twl-common.c:57: warning: 'twl_get_voltage' defined but not used
> 
> This patch moves the code in question behind ARCH specific flags and
> eliminates these warnings.
> 
> Reported-by: Paul Walmsley <paul@pwsan.com>
> Signed-off-by: Tero Kristo <t-kristo@ti.com>

Thanks Tero, looks okay to me.  I guess Kevin or Tony should queue this 
one.


- Paul

[PATCH] ARM: OMAP2: twl-common: fix compiler warnings

[Tony Lindgren]

* Tero Kristo <t-kristo@ti.com> [120628 03:54]:
> OMAP2 does not use the external voltage controller code for TWL, and
> thus OMAP2 only compilation generates following warnings:

Hmm well omap2420 does not have twl, but 2430 usually has. So do you
mean that 2430 does not use the external voltage controller code?

> arch/arm/mach-omap2/twl-common.c:51: warning: 'twl_set_voltage' defined but not used
> arch/arm/mach-omap2/twl-common.c:57: warning: 'twl_get_voltage' defined but not used
> 
> This patch moves the code in question behind ARCH specific flags and
> eliminates these warnings.
...

> --- a/arch/arm/mach-omap2/twl-common.c
> +++ b/arch/arm/mach-omap2/twl-common.c
> @@ -48,6 +48,7 @@ static struct i2c_board_info __initdata omap4_i2c1_board_info[] = {
>  	},
>  };
>  
> +#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4)
>  static int twl_set_voltage(void *data, int target_uV)
>  {
>  	struct voltagedomain *voltdm = (struct voltagedomain *)data;
> @@ -59,6 +60,7 @@ static int twl_get_voltage(void *data)
>  	struct voltagedomain *voltdm = (struct voltagedomain *)data;
>  	return voltdm_get_voltage(voltdm);
>  }
> +#endif

To avoid patching this piece of code for new SoCs, can we make it
ifndef CONFIG_ARCH_OMAP2? Also in the makefile we should not even
build twl-common.o for 2420 only builds..

Regards,

Tony

[PATCH] ARM: OMAP2: twl-common: fix compiler warnings

[Tero Kristo]

On Fri, 2012-07-06 at 01:53 -0700, Tony Lindgren wrote:
> * Tero Kristo <t-kristo@ti.com> [120628 03:54]:
> > OMAP2 does not use the external voltage controller code for TWL, and
> > thus OMAP2 only compilation generates following warnings:
> 
> Hmm well omap2420 does not have twl, but 2430 usually has. So do you
> mean that 2430 does not use the external voltage controller code?

Well, at least currently the external controller code is not used on any
omap2xxx chip. I guess it might be possible to extend the support for
omap2 also, but I don't know who can do that (personally I have no
access to omap2 hw.)

> 
> > arch/arm/mach-omap2/twl-common.c:51: warning: 'twl_set_voltage' defined but not used
> > arch/arm/mach-omap2/twl-common.c:57: warning: 'twl_get_voltage' defined but not used
> > 
> > This patch moves the code in question behind ARCH specific flags and
> > eliminates these warnings.
> ...
> 
> > --- a/arch/arm/mach-omap2/twl-common.c
> > +++ b/arch/arm/mach-omap2/twl-common.c
> > @@ -48,6 +48,7 @@ static struct i2c_board_info __initdata omap4_i2c1_board_info[] = {
> >  	},
> >  };
> >  
> > +#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4)
> >  static int twl_set_voltage(void *data, int target_uV)
> >  {
> >  	struct voltagedomain *voltdm = (struct voltagedomain *)data;
> > @@ -59,6 +60,7 @@ static int twl_get_voltage(void *data)
> >  	struct voltagedomain *voltdm = (struct voltagedomain *)data;
> >  	return voltdm_get_voltage(voltdm);
> >  }
> > +#endif
> 
> To avoid patching this piece of code for new SoCs, can we make it
> ifndef CONFIG_ARCH_OMAP2? Also in the makefile we should not even
> build twl-common.o for 2420 only builds..

Can't make it ifndef CONFIG_ARCH_OMAP2, as this would break on
omap2plus_defconfig then... as it defines all ARCH_OMAP2...ARCH_OMAP4.

And... can't drop it from makefile either, as parts of the code from
twl-common.c are still used with omap2 (omap_pmic_init &
omap_pmic_late_init). These would need to be moved elsewhere first.

-Tero

[PATCH] ARM: OMAP2: twl-common: fix compiler warnings

[Peter Ujfalusi]

Hi Tero,

On 06/28/2012 12:49 PM, Tero Kristo wrote:
> OMAP2 does not use the external voltage controller code for TWL, and
> thus OMAP2 only compilation generates following warnings:
> 
> arch/arm/mach-omap2/twl-common.c:51: warning: 'twl_set_voltage' defined but not used
> arch/arm/mach-omap2/twl-common.c:57: warning: 'twl_get_voltage' defined but not used
> 
> This patch moves the code in question behind ARCH specific flags and
> eliminates these warnings.
> 
> Reported-by: Paul Walmsley <paul@pwsan.com>
> Signed-off-by: Tero Kristo <t-kristo@ti.com>

I did sent similar patch:
http://www.mail-archive.com/linux-omap at vger.kernel.org/msg70432.html

Tony applied it to fixes I think already.

-- 
P?ter