[RFC PATCHv1 1/2] ARM: socfpga: initial support for Altera's SOCFPGA platform.

[robherring2@gmail.com (Rob Herring)]

On 07/09/2012 06:30 AM, Pavel Machek wrote:
> Hi!
> 
>>> +config ARCH_SOCFPGA
>>> +	bool "Altera SOCFPGA family"
>>> +	select CPU_V7
>>> +	select ARM_GIC
>>> +	select ARM_AMBA
>>> +	select CLKDEV_LOOKUP
>>> +	select MIGHT_HAVE_CACHE_L2X0
>>> +	select HAVE_MACH_CLKDEV
>>> +	select GENERIC_CLOCKEVENTS
>>> +	select ARCH_WANT_OPTIONAL_GPIOLIB
>>> +	select GPIO_PL061 if GPIOLIB
>>> +	select NEED_MACH_MEMORY_H
>>> +	select USE_OF
>>
>> Alphabetize the selects.
> 
> Umm... Others are not alphabetized, either. Something like this to
> group them logically?

Many are not, but check any relatively new platform like highbank, zynq,
picoxcell.

Rob

>>> @@ -1596,6 +1614,7 @@ config HZ
>>>  	default OMAP_32K_TIMER_HZ if ARCH_OMAP && OMAP_32K_TIMER
>>>  	default AT91_TIMER_HZ if ARCH_AT91
>>>  	default SHMOBILE_TIMER_HZ if ARCH_SHMOBILE
>>> +	default SOCFPGA_TIMER_HZ if ARCH_SOCFPGA
>>
>> Is this really needed?
> 
> Probably not. Removed.
> 
>>> +struct clk_ops {
>>> +	long	(*round)(struct clk *, unsigned long);
>>> +	int	(*set)(struct clk *, unsigned long);
>>> +};
>>
>> Use common clk infrastructure.
> 
> Yep, done already.
> 
>>> +#define IO_SPACE_LIMIT 0xffffffff
>>> +
>>> +#define __io(a)		__typesafe_io(a)
>>> +#define __mem_pci(a)	(a)
>>
>> You don't need io.h, remove it.
> 
> Will do, thanks.
> 
>>> --- /dev/null
>>> +++ b/arch/arm/mach-socfpga/include/mach/iomap.h
>>> @@ -0,0 +1,37 @@
>>> +#include <asm/sizes.h>
>>> +
>>> +/* macro to get at IO space when running virtually */
>>> +#ifdef CONFIG_MMU
>>
>> Do you really support !MMU?
> 
> No. Will remove.
> 
>>> +#define SOFTIRQ_SOCFPGA_GPIO_2_28	(IRQ_SOCFPGA_GIC_START + 269)
>>> +#define SOFTIRQ_SOCFPGA_GPIO_2_29	(IRQ_SOCFPGA_GIC_START + 270)
>>> +
>>
>> All these defines should come from DT.
> 
> Yes. Most of them do now, will fix the rest.
> 
>>> +#define NR_IRQS			512
>>
>> As mentioned, use SPARSE_IRQ.
> 
> Fixed. As mentioned :-).
> 
>>> +#define PLAT_PHYS_OFFSET	UL(0x00000000)
>>> +
>>> +#if !defined(__ASSEMBLY__) && defined(CONFIG_ZONE_DMA)
>>> +
>>> +#define ISA_DMA_THRESHOLD	(PHYS_OFFSET + SZ_256M - 1)
>>> +#define MAX_DMA_ADDRESS		(PAGE_OFFSET + SZ_256M)
>>> +#endif
>>
>> You shouldn't need memory.h.
> 
> Ok.
> 
>>> --- /dev/null
>>> +++ b/arch/arm/mach-socfpga/include/mach/system.h
>>> @@ -0,0 +1,31 @@
>>> +static inline void arch_idle(void)
>>> +{
>>> +	/*
>>> +	 * This should do all the clock switching
>>> +	 * and wait for interrupt tricks
>>> +	 */
>>> +	cpu_do_idle();
>>> +}
>>
>> This isn't needed any longer and system.h should be removed.
> 
> Ok.
> 
>>> --- /dev/null
>>> +++ b/arch/arm/mach-socfpga/platsmp.c
> ...
>>> +/*
>>> + * control for which core is the next to come out of the secondary
>>> + * boot "holding pen"
>>> + */
>>> +int __cpuinitdata pen_release = -1;
>>
>> None of this pen stuff is needed if you properly reset cores when
>> hot-unplugged. All this is only needed if you only go to wfi when hot
>> unplugged. See highbank platsmp.c for an example without pen code.
> 
> Will take a look, thanks!
> 
>>> diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
>>> index 101b968..2f9a81e 100644
>>> --- a/arch/arm/mm/Kconfig
>>> +++ b/arch/arm/mm/Kconfig
>>> @@ -381,7 +381,7 @@ config CPU_V6K
>>>  
>>>  # ARMv7
>>>  config CPU_V7
>>> -	bool "Support ARM V7 processor" if ARCH_INTEGRATOR || MACH_REALVIEW_EB || MACH_REALVIEW_PBX
>>> +	bool "Support ARM V7 processor" if ARCH_INTEGRATOR || MACH_REALVIEW_EB || MACH_REALVIEW_PBX || ARCH_SOCFPGA
>>
>> This is not needed.
> 
> Already fixed.
> 
> Thanks for the review. This is the easy stuff, I'll remove the
> memory.h/system.h next, then address the SMP thing.
> 									Pavel
> 
> diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
> index d203253..ab3b389 100644
> --- a/arch/arm/Kconfig
> +++ b/arch/arm/Kconfig
> @@ -252,18 +252,18 @@ choice
>  
>  config ARCH_SOCFPGA
>  	bool "Altera SOCFPGA family"
> -	select CPU_V7
> -	select ARM_GIC
>  	select ARM_AMBA
> -	select CLKDEV_LOOKUP
> -	select MIGHT_HAVE_CACHE_L2X0
> -	select HAVE_MACH_CLKDEV
> -	select GENERIC_CLOCKEVENTS
> +	select ARM_GIC
> +	select CPU_V7
>  	select ARCH_WANT_OPTIONAL_GPIOLIB
>  	select GPIO_PL061 if GPIOLIB
> +	select CLKDEV_LOOKUP
> +	select GENERIC_CLOCKEVENTS
> +	select HAVE_MACH_CLKDEV
> +	select MIGHT_HAVE_CACHE_L2X0
>  	select NEED_MACH_MEMORY_H
> -	select USE_OF
>  	select SPARSE_IRQ
> +	select USE_OF
>  	help
>  	  This enables support for Altera SOCFPGA Cyclone V platform
>  
> @@ -1615,7 +1615,6 @@ config HZ
>  	default OMAP_32K_TIMER_HZ if ARCH_OMAP && OMAP_32K_TIMER
>  	default AT91_TIMER_HZ if ARCH_AT91
>  	default SHMOBILE_TIMER_HZ if ARCH_SHMOBILE
> -	default SOCFPGA_TIMER_HZ if ARCH_SOCFPGA
>  	default 100
>  
>  config THUMB2_KERNEL
> diff --git a/arch/arm/mach-socfpga/Kconfig b/arch/arm/mach-socfpga/Kconfig
> index 81358e6..7f1b72b 100644
> --- a/arch/arm/mach-socfpga/Kconfig
> +++ b/arch/arm/mach-socfpga/Kconfig
> @@ -6,10 +6,3 @@ config MACH_SOCFPGA_CYCLONE5
>  	select COMMON_CLK
>  	help
>  	  Include support for the Altera(R) Cyclone5 development platform.
> -
> -config SOCFPGA_TIMER_HZ
> -	int "Kernel internal timer frequency "
> -	range 20 1024
> -	default "100"
> -	help
> -	  Kernel internal timer frequency should be a divisor of 77161.
> diff --git a/arch/arm/mach-socfpga/include/mach/iomap.h b/arch/arm/mach-socfpga/include/mach/iomap.h
> index 656482d..d5f8493 100644
> --- a/arch/arm/mach-socfpga/include/mach/iomap.h
> +++ b/arch/arm/mach-socfpga/include/mach/iomap.h
> @@ -20,7 +20,6 @@
>  #include <asm/sizes.h>
>  
>  /* macro to get at IO space when running virtually */
> -#ifdef CONFIG_MMU
>  /*
>   * Statically mapped addresses:
>   *
> @@ -29,9 +28,6 @@
>   * 1fxx xxxx -> fexx xxxx
>   */
>  #define IO_ADDRESS(x)		(((x) & 0x03ffffff) + 0xfb000000)
> -#else
> -#define IO_ADDRESS(x)		(x)
> -#endif
>  #define __io_address(n)		IOMEM(IO_ADDRESS(n))
>  
> -#endif
> \ No newline at end of file
> +#endif
>