[PATCH] mtd: physmap_of: Retire Gemini pad control

[marek.vasut@gmail.com (Marek Vasut)]

On 08/08/2017 09:05 PM, Linus Walleij wrote:
> I wrote a proper pin control driver for the Gemini. Retire this
> SoC-specific pad control and rely on the pin controller to manage
> this.
> 
> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

Reviewed-by: Marek Vasut <marek.vasut@gmail.com>

Thanks!

> ---
>  drivers/mtd/maps/physmap_of_gemini.c | 16 ----------------
>  1 file changed, 16 deletions(-)
> 
> diff --git a/drivers/mtd/maps/physmap_of_gemini.c b/drivers/mtd/maps/physmap_of_gemini.c
> index 05b286b5289f..4ed1a6bb4d3c 100644
> --- a/drivers/mtd/maps/physmap_of_gemini.c
> +++ b/drivers/mtd/maps/physmap_of_gemini.c
> @@ -43,13 +43,6 @@
>  
>  #define FLASH_PARALLEL_HIGH_PIN_CNT	(1 << 20)	/* else low pin cnt */
>  
> -/* Miscellaneous Control Register */
> -#define GLOBAL_MISC_CTRL		0x30
> -#define FLASH_PADS_MASK			0x07
> -#define NAND_PADS_DISABLE		BIT(2)
> -#define PFLASH_PADS_DISABLE		BIT(1)
> -#define SFLASH_PADS_DISABLE		BIT(0)
> -
>  static const struct of_device_id syscon_match[] = {
>  	{ .compatible = "cortina,gemini-syscon" },
>  	{ },
> @@ -102,15 +95,6 @@ int of_flash_probe_gemini(struct platform_device *pdev,
>  				 map->bankwidth * 8);
>  	}
>  
> -	/* Activate parallel (NOR flash) mode */
> -	ret = regmap_update_bits(rmap, GLOBAL_MISC_CTRL,
> -				 FLASH_PADS_MASK,
> -				 SFLASH_PADS_DISABLE | NAND_PADS_DISABLE);
> -	if (ret) {
> -		dev_err(dev, "unable to set up physmap pads\n");
> -		return -ENODEV;
> -	}
> -
>  	dev_info(&pdev->dev, "initialized Gemini-specific physmap control\n");
>  
>  	return 0;
> 


-- 
Best regards,
Marek Vasut