From mboxrd@z Thu Jan 1 00:00:00 1970 From: hoegeun.kwon@samsung.com (Hoegeun Kwon) Date: Fri, 19 May 2017 15:56:25 +0900 Subject: [PATCH v3 0/3] Add support for the S6E3HF2 panel on TM2e board In-Reply-To: <1492504836-19225-1-git-send-email-hoegeun.kwon@samsung.com> References: <1492504836-19225-1-git-send-email-hoegeun.kwon@samsung.com> Message-ID: <4b974579-eb2f-1258-86e3-21ffeb22589a@samsung.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Dear Thierry, Could you check these patches? I think this patches have accumulated enough dust. If you have a another opinion, please tell me. Best regards, Hoegeun On 04/18/2017 05:40 PM, Hoegeun Kwon wrote: > Hi all, > > The purpose of this patch is add support for s6e3hf2 AMOLED panel on > the TM2e board. The panel has 1600x2560 resolution in 5.65" physical > panel in the TM2e device. > > The s6e3hf2 panel(5.65") is simliar to the previous s6e3ha2 panel(5.7"), > but resolution and some command message are different. So it can be > distinguished as a compatiblitiy string. > > Best regards, > Hoegeun > > Changes for V3: > - Remove te-gpios property in dts. > - Added Reviewed-by: Andrzej Hajda on all patches. > - Added Reviewed-by: Inki Dae on patch (2/3). > > Changes for V2: > - Add new compatible string to "samsung,s6e3ha2.txt binding with comments. > - Fix the panel name from s6e3ha2-e to s6e3hf2 > > Hoegeun Kwon (3): > dt-bindings: Add support for samsung s6e3hf2 panel > drm/panel: s6e3ha2: Add support for s6e3hf2 panel on TM2e board > arm64: dts: exynos: Add support for s6e3hf2 panel device on TM2e board > > .../bindings/display/panel/samsung,s6e3ha2.txt | 5 +- > arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts | 11 ++++ > drivers/gpu/drm/panel/panel-samsung-s6e3ha2.c | 64 +++++++++++++++++++--- > 3 files changed, 72 insertions(+), 8 deletions(-) >