[PATCH] ARM: tegra: dalmore: fix irq trigger type

[stefan@agner.ch (Stefan Agner)]

Trigger type needs to be IRQ_TYPE_LEVEL_HIGH since the interrupt
signal gets inverted by the PMC (configured by the invert-interrupt
property).

Signed-off-by: Stefan Agner <stefan@agner.ch>
---
I could not test that patch since I don't have such hardware.
However, I stumbled on that error while tracing a similar error
on Colibri T30.

 arch/arm/boot/dts/tegra114-dalmore.dts | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/tegra114-dalmore.dts b/arch/arm/boot/dts/tegra114-dalmore.dts
index 73aecfb..f5025fc 100644
--- a/arch/arm/boot/dts/tegra114-dalmore.dts
+++ b/arch/arm/boot/dts/tegra114-dalmore.dts
@@ -888,8 +888,9 @@
 		palmas: tps65913 at 58 {
 			compatible = "ti,palmas";
 			reg = <0x58>;
-			interrupts = <0 86 IRQ_TYPE_LEVEL_LOW>;
 
+			/* active-low configured by PMC invert-interrupt */
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
 			#interrupt-cells = <2>;
 			interrupt-controller;
 
-- 
1.8.5.4