From mboxrd@z Thu Jan 1 00:00:00 1970 From: nsekhar@ti.com (Sekhar Nori) Date: Sat, 11 Aug 2012 01:27:11 +0530 Subject: [PATCH v3 0/6] omap-am33xx rtc dt support In-Reply-To: References: Message-ID: <50256797.3020505@ti.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On 7/27/2012 5:53 PM, Afzal Mohammed wrote: > Hi, > > This series makes rtc-omap driver DT capable, adds AM33xx > RTC DT support along with a few enchancments to the driver. > > rtc-omap driver is made intelligent enough to handle kicker > mechanism. This helps in removing kicker mechanism support > done for DaVinci at platform level. > > This has been tested on Beaglebone (AM33xx platform) and on > DaVinci DA850 EVM. > > This series is based over linux-omap master and can be > directly applied over linux-next, except for > [PATCH 6/6] arm/dts: am33xx rtc node. > > PATCH 6/6 should go through linux-omap tree and needs > http://www.mail-archive.com/linux-omap at vger.kernel.org/msg71644.html > (arm/dts: am33xx wdt node) to get applied cleanly I tested patches 1-5 on AM18x EVM using rtcwake and hwclock commands. Also tested on DT enabled AM18x EVM using hwclock. For patched 1-5: Acked-by: Sekhar Nori Alessandro, I assume you would want me to queue 2/6 through DaVinci tree. That patch depends on 1/6 being accepted and merged by you. Let me know how you want to move forward here. Thanks, Sekhar