From mboxrd@z Thu Jan 1 00:00:00 1970 From: b-cousson@ti.com (Benoit Cousson) Date: Tue, 14 Aug 2012 11:56:45 +0200 Subject: [PATCHv2 2/4] arm/dts: omap5-evm: Add tmp102 sensor support In-Reply-To: <1344852313-30484-3-git-send-email-sourav.poddar@ti.com> References: <1344852313-30484-1-git-send-email-sourav.poddar@ti.com> <1344852313-30484-3-git-send-email-sourav.poddar@ti.com> Message-ID: <502A20DD.5030707@ti.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On 08/13/2012 12:05 PM, Sourav Poddar wrote: > Add tmp102 temperature sensor data in omap5 evm dts file. > > Tested on omap5430 evm with 3.5 custom kernel. > > Cc: Benoit Cousson > Cc: Felipe Balbi > Cc: Santosh Shilimkar > Acked-by: Felipe Balbi > Signed-off-by: Sourav Poddar > --- > arch/arm/boot/dts/omap5-evm.dts | 9 +++++++++ > 1 files changed, 9 insertions(+), 0 deletions(-) > > diff --git a/arch/arm/boot/dts/omap5-evm.dts b/arch/arm/boot/dts/omap5-evm.dts > index 200c39a..45a8aeb 100644 > --- a/arch/arm/boot/dts/omap5-evm.dts > +++ b/arch/arm/boot/dts/omap5-evm.dts > @@ -18,3 +18,12 @@ > reg = <0x80000000 0x40000000>; /* 1 GB */ > }; > }; > + > +&i2c4 { > + clock-frequency = <400000>; Have you checked if we cannot run at faster speed? Reducing the speed will impact every devices on the bus. It might be needed, I just wanted to be sure. You should maybe just add a small comment to explain what the device is doing with potentially a link to the HW spec if available. The same comments are applicable to the bmp085 patch. Regards, Benoit