* [PATCH] ARM: LPC32xx: Adjust to pl08x DMA interface changes
@ 2012-07-12 12:22 Roland Stigge
2012-07-12 12:22 ` [PATCH 1/2] mtd: lpc32xx_slc: " Roland Stigge
` (2 more replies)
0 siblings, 3 replies; 9+ messages in thread
From: Roland Stigge @ 2012-07-12 12:22 UTC (permalink / raw)
To: linux-arm-kernel
This patch adjusts the LPC32xx platform support to the new pl08x DMA interface,
fixing the compile error resulting from changed pl08x structures.
Signed-off-by: Roland Stigge <stigge@antcom.de>
---
Applies to today's linux-next (integrated lpc32xx-next and dma branches which collide)
arch/arm/mach-lpc32xx/phy3250.c | 7 +++----
1 file changed, 3 insertions(+), 4 deletions(-)
diff --git a/arch/arm/mach-lpc32xx/phy3250.c b/arch/arm/mach-lpc32xx/phy3250.c
index 8625237..b07dcc9 100644
--- a/arch/arm/mach-lpc32xx/phy3250.c
+++ b/arch/arm/mach-lpc32xx/phy3250.c
@@ -186,13 +186,12 @@ static struct pl08x_channel_data pl08x_slave_channels[] = {
},
};
-/* NOTE: These will change, according to RMK */
-static int pl08x_get_signal(struct pl08x_dma_chan *ch)
+static int pl08x_get_signal(const struct pl08x_channel_data *cd)
{
- return ch->cd->min_signal;
+ return cd->min_signal;
}
-static void pl08x_put_signal(struct pl08x_dma_chan *ch)
+static void pl08x_put_signal(const struct pl08x_channel_data *cd, int ch)
{
}
--
1.7.10.4
^ permalink raw reply related [flat|nested] 9+ messages in thread
* [PATCH 1/2] mtd: lpc32xx_slc: Adjust to pl08x DMA interface changes
2012-07-12 12:22 [PATCH] ARM: LPC32xx: Adjust to pl08x DMA interface changes Roland Stigge
@ 2012-07-12 12:22 ` Roland Stigge
2012-07-13 12:52 ` Alexandre Pereira da Silva
2012-08-15 10:37 ` Artem Bityutskiy
2012-07-12 12:22 ` [PATCH 2/2] mtd: lpc32xx_mlc: " Roland Stigge
2012-07-13 12:51 ` [PATCH] ARM: LPC32xx: " Alexandre Pereira da Silva
2 siblings, 2 replies; 9+ messages in thread
From: Roland Stigge @ 2012-07-12 12:22 UTC (permalink / raw)
To: linux-arm-kernel
This patch adjusts the LPC32xx SLC NAND driver to the new pl08x DMA interface,
fixing the compile error resulting from changed pl08x structures.
Signed-off-by: Roland Stigge <stigge@antcom.de>
---
Applies to today's linux-next (integrated lpc32xx-next and dma branches which collide)
drivers/mtd/nand/lpc32xx_slc.c | 13 +------------
1 file changed, 1 insertion(+), 12 deletions(-)
diff --git a/drivers/mtd/nand/lpc32xx_slc.c b/drivers/mtd/nand/lpc32xx_slc.c
index 1719387..c8c1d06 100644
--- a/drivers/mtd/nand/lpc32xx_slc.c
+++ b/drivers/mtd/nand/lpc32xx_slc.c
@@ -714,17 +714,6 @@ static int lpc32xx_nand_write_page_raw_syndrome(struct mtd_info *mtd,
return 0;
}
-static bool lpc32xx_dma_filter(struct dma_chan *chan, void *param)
-{
- struct pl08x_dma_chan *ch =
- container_of(chan, struct pl08x_dma_chan, chan);
-
- /* In LPC32xx's PL080 DMA wiring, the SLC NAND DMA signal is #1 */
- if (ch->cd->min_signal == 1)
- return true;
- return false;
-}
-
static int lpc32xx_nand_dma_setup(struct lpc32xx_nand_host *host)
{
struct mtd_info *mtd = &host->mtd;
@@ -732,7 +721,7 @@ static int lpc32xx_nand_dma_setup(struct lpc32xx_nand_host *host)
dma_cap_zero(mask);
dma_cap_set(DMA_SLAVE, mask);
- host->dma_chan = dma_request_channel(mask, lpc32xx_dma_filter, NULL);
+ host->dma_chan = dma_request_channel(mask, pl08x_filter_id, "nand-slc");
if (!host->dma_chan) {
dev_err(mtd->dev.parent, "Failed to request DMA channel\n");
return -EBUSY;
--
1.7.10.4
^ permalink raw reply related [flat|nested] 9+ messages in thread
* [PATCH 2/2] mtd: lpc32xx_mlc: Adjust to pl08x DMA interface changes
2012-07-12 12:22 [PATCH] ARM: LPC32xx: Adjust to pl08x DMA interface changes Roland Stigge
2012-07-12 12:22 ` [PATCH 1/2] mtd: lpc32xx_slc: " Roland Stigge
@ 2012-07-12 12:22 ` Roland Stigge
2012-07-13 12:51 ` Alexandre Pereira da Silva
2012-07-13 12:51 ` [PATCH] ARM: LPC32xx: " Alexandre Pereira da Silva
2 siblings, 1 reply; 9+ messages in thread
From: Roland Stigge @ 2012-07-12 12:22 UTC (permalink / raw)
To: linux-arm-kernel
This patch adjusts the LPC32xx MLC NAND driver to the new pl08x DMA interface,
fixing the compile error resulting from changed pl08x structures.
Signed-off-by: Roland Stigge <stigge@antcom.de>
---
Applies to today's linux-next (integrated lpc32xx-next and dma branches which collide)
drivers/mtd/nand/lpc32xx_mlc.c | 13 +------------
1 file changed, 1 insertion(+), 12 deletions(-)
diff --git a/drivers/mtd/nand/lpc32xx_mlc.c b/drivers/mtd/nand/lpc32xx_mlc.c
index 260b2c2..1cf3593 100644
--- a/drivers/mtd/nand/lpc32xx_mlc.c
+++ b/drivers/mtd/nand/lpc32xx_mlc.c
@@ -576,17 +576,6 @@ static void lpc32xx_ecc_enable(struct mtd_info *mtd, int mode)
/* Always enabled! */
}
-static bool lpc32xx_dma_filter(struct dma_chan *chan, void *param)
-{
- struct pl08x_dma_chan *ch =
- container_of(chan, struct pl08x_dma_chan, chan);
-
- /* In LPC32xx's PL080 DMA wiring, the MLC NAND DMA signal is #12 */
- if (ch->cd->min_signal == 12)
- return true;
- return false;
-}
-
static int lpc32xx_dma_setup(struct lpc32xx_nand_host *host)
{
struct mtd_info *mtd = &host->mtd;
@@ -594,7 +583,7 @@ static int lpc32xx_dma_setup(struct lpc32xx_nand_host *host)
dma_cap_zero(mask);
dma_cap_set(DMA_SLAVE, mask);
- host->dma_chan = dma_request_channel(mask, lpc32xx_dma_filter, NULL);
+ host->dma_chan = dma_request_channel(mask, pl08x_filter_id, "nand-mlc");
if (!host->dma_chan) {
dev_err(mtd->dev.parent, "Failed to request DMA channel\n");
return -EBUSY;
--
1.7.10.4
^ permalink raw reply related [flat|nested] 9+ messages in thread
* [PATCH 2/2] mtd: lpc32xx_mlc: Adjust to pl08x DMA interface changes
2012-07-12 12:22 ` [PATCH 2/2] mtd: lpc32xx_mlc: " Roland Stigge
@ 2012-07-13 12:51 ` Alexandre Pereira da Silva
0 siblings, 0 replies; 9+ messages in thread
From: Alexandre Pereira da Silva @ 2012-07-13 12:51 UTC (permalink / raw)
To: linux-arm-kernel
On Thu, Jul 12, 2012 at 9:22 AM, Roland Stigge <stigge@antcom.de> wrote:
> This patch adjusts the LPC32xx MLC NAND driver to the new pl08x DMA interface,
> fixing the compile error resulting from changed pl08x structures.
>
> Signed-off-by: Roland Stigge <stigge@antcom.de>
Acked-By: Alexandre Pereira da Silva <aletes.xgr@gmail.com>
> ---
>
> Applies to today's linux-next (integrated lpc32xx-next and dma branches which collide)
>
> drivers/mtd/nand/lpc32xx_mlc.c | 13 +------------
> 1 file changed, 1 insertion(+), 12 deletions(-)
>
> diff --git a/drivers/mtd/nand/lpc32xx_mlc.c b/drivers/mtd/nand/lpc32xx_mlc.c
> index 260b2c2..1cf3593 100644
> --- a/drivers/mtd/nand/lpc32xx_mlc.c
> +++ b/drivers/mtd/nand/lpc32xx_mlc.c
> @@ -576,17 +576,6 @@ static void lpc32xx_ecc_enable(struct mtd_info *mtd, int mode)
> /* Always enabled! */
> }
>
> -static bool lpc32xx_dma_filter(struct dma_chan *chan, void *param)
> -{
> - struct pl08x_dma_chan *ch =
> - container_of(chan, struct pl08x_dma_chan, chan);
> -
> - /* In LPC32xx's PL080 DMA wiring, the MLC NAND DMA signal is #12 */
> - if (ch->cd->min_signal == 12)
> - return true;
> - return false;
> -}
> -
> static int lpc32xx_dma_setup(struct lpc32xx_nand_host *host)
> {
> struct mtd_info *mtd = &host->mtd;
> @@ -594,7 +583,7 @@ static int lpc32xx_dma_setup(struct lpc32xx_nand_host *host)
>
> dma_cap_zero(mask);
> dma_cap_set(DMA_SLAVE, mask);
> - host->dma_chan = dma_request_channel(mask, lpc32xx_dma_filter, NULL);
> + host->dma_chan = dma_request_channel(mask, pl08x_filter_id, "nand-mlc");
> if (!host->dma_chan) {
> dev_err(mtd->dev.parent, "Failed to request DMA channel\n");
> return -EBUSY;
> --
> 1.7.10.4
>
^ permalink raw reply [flat|nested] 9+ messages in thread
* [PATCH] ARM: LPC32xx: Adjust to pl08x DMA interface changes
2012-07-12 12:22 [PATCH] ARM: LPC32xx: Adjust to pl08x DMA interface changes Roland Stigge
2012-07-12 12:22 ` [PATCH 1/2] mtd: lpc32xx_slc: " Roland Stigge
2012-07-12 12:22 ` [PATCH 2/2] mtd: lpc32xx_mlc: " Roland Stigge
@ 2012-07-13 12:51 ` Alexandre Pereira da Silva
2 siblings, 0 replies; 9+ messages in thread
From: Alexandre Pereira da Silva @ 2012-07-13 12:51 UTC (permalink / raw)
To: linux-arm-kernel
On Thu, Jul 12, 2012 at 9:22 AM, Roland Stigge <stigge@antcom.de> wrote:
> This patch adjusts the LPC32xx platform support to the new pl08x DMA interface,
> fixing the compile error resulting from changed pl08x structures.
>
> Signed-off-by: Roland Stigge <stigge@antcom.de>
Acked-By: Alexandre Pereira da Silva <aletes.xgr@gmail.com>
> ---
>
> Applies to today's linux-next (integrated lpc32xx-next and dma branches which collide)
>
> arch/arm/mach-lpc32xx/phy3250.c | 7 +++----
> 1 file changed, 3 insertions(+), 4 deletions(-)
>
> diff --git a/arch/arm/mach-lpc32xx/phy3250.c b/arch/arm/mach-lpc32xx/phy3250.c
> index 8625237..b07dcc9 100644
> --- a/arch/arm/mach-lpc32xx/phy3250.c
> +++ b/arch/arm/mach-lpc32xx/phy3250.c
> @@ -186,13 +186,12 @@ static struct pl08x_channel_data pl08x_slave_channels[] = {
> },
> };
>
> -/* NOTE: These will change, according to RMK */
> -static int pl08x_get_signal(struct pl08x_dma_chan *ch)
> +static int pl08x_get_signal(const struct pl08x_channel_data *cd)
> {
> - return ch->cd->min_signal;
> + return cd->min_signal;
> }
>
> -static void pl08x_put_signal(struct pl08x_dma_chan *ch)
> +static void pl08x_put_signal(const struct pl08x_channel_data *cd, int ch)
> {
> }
>
> --
> 1.7.10.4
>
^ permalink raw reply [flat|nested] 9+ messages in thread
* [PATCH 1/2] mtd: lpc32xx_slc: Adjust to pl08x DMA interface changes
2012-07-12 12:22 ` [PATCH 1/2] mtd: lpc32xx_slc: " Roland Stigge
@ 2012-07-13 12:52 ` Alexandre Pereira da Silva
2012-08-15 10:37 ` Artem Bityutskiy
1 sibling, 0 replies; 9+ messages in thread
From: Alexandre Pereira da Silva @ 2012-07-13 12:52 UTC (permalink / raw)
To: linux-arm-kernel
On Thu, Jul 12, 2012 at 9:22 AM, Roland Stigge <stigge@antcom.de> wrote:
> This patch adjusts the LPC32xx SLC NAND driver to the new pl08x DMA interface,
> fixing the compile error resulting from changed pl08x structures.
>
> Signed-off-by: Roland Stigge <stigge@antcom.de>
Acked-By: Alexandre Pereira da Silva <aletes.xgr@gmail.com>
> ---
>
> Applies to today's linux-next (integrated lpc32xx-next and dma branches which collide)
>
> drivers/mtd/nand/lpc32xx_slc.c | 13 +------------
> 1 file changed, 1 insertion(+), 12 deletions(-)
>
> diff --git a/drivers/mtd/nand/lpc32xx_slc.c b/drivers/mtd/nand/lpc32xx_slc.c
> index 1719387..c8c1d06 100644
> --- a/drivers/mtd/nand/lpc32xx_slc.c
> +++ b/drivers/mtd/nand/lpc32xx_slc.c
> @@ -714,17 +714,6 @@ static int lpc32xx_nand_write_page_raw_syndrome(struct mtd_info *mtd,
> return 0;
> }
>
> -static bool lpc32xx_dma_filter(struct dma_chan *chan, void *param)
> -{
> - struct pl08x_dma_chan *ch =
> - container_of(chan, struct pl08x_dma_chan, chan);
> -
> - /* In LPC32xx's PL080 DMA wiring, the SLC NAND DMA signal is #1 */
> - if (ch->cd->min_signal == 1)
> - return true;
> - return false;
> -}
> -
> static int lpc32xx_nand_dma_setup(struct lpc32xx_nand_host *host)
> {
> struct mtd_info *mtd = &host->mtd;
> @@ -732,7 +721,7 @@ static int lpc32xx_nand_dma_setup(struct lpc32xx_nand_host *host)
>
> dma_cap_zero(mask);
> dma_cap_set(DMA_SLAVE, mask);
> - host->dma_chan = dma_request_channel(mask, lpc32xx_dma_filter, NULL);
> + host->dma_chan = dma_request_channel(mask, pl08x_filter_id, "nand-slc");
> if (!host->dma_chan) {
> dev_err(mtd->dev.parent, "Failed to request DMA channel\n");
> return -EBUSY;
> --
> 1.7.10.4
>
^ permalink raw reply [flat|nested] 9+ messages in thread
* [PATCH 1/2] mtd: lpc32xx_slc: Adjust to pl08x DMA interface changes
2012-07-12 12:22 ` [PATCH 1/2] mtd: lpc32xx_slc: " Roland Stigge
2012-07-13 12:52 ` Alexandre Pereira da Silva
@ 2012-08-15 10:37 ` Artem Bityutskiy
2012-08-16 8:46 ` Roland Stigge
2012-08-16 14:26 ` Roland Stigge
1 sibling, 2 replies; 9+ messages in thread
From: Artem Bityutskiy @ 2012-08-15 10:37 UTC (permalink / raw)
To: linux-arm-kernel
On Thu, 2012-07-12 at 14:22 +0200, Roland Stigge wrote:
> This patch adjusts the LPC32xx SLC NAND driver to the new pl08x DMA interface,
> fixing the compile error resulting from changed pl08x structures.
>
> Signed-off-by: Roland Stigge <stigge@antcom.de>
This patch breaks compilation:
ERROR: "pl08x_filter_id" [drivers/mtd/nand/lpc32xx_slc.ko] undefined!
Please, send a fix. The defconfig I used is attached.
--
Best Regards,
Artem Bityutskiy
-------------- next part --------------
CONFIG_EXPERIMENTAL=y
CONFIG_SYSVIPC=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=16
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_EMBEDDED=y
CONFIG_SLAB=y
CONFIG_JUMP_LABEL=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_BLK_DEV_BSG is not set
CONFIG_PARTITION_ADVANCED=y
CONFIG_ARCH_LPC32XX=y
CONFIG_PREEMPT=y
CONFIG_AEABI=y
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_ARM_APPENDED_DTB=y
CONFIG_ARM_ATAG_DTB_COMPAT=y
CONFIG_CMDLINE="console=ttyS0,115200n81 root=/dev/ram0"
CONFIG_CPU_IDLE=y
CONFIG_FPE_NWFPE=y
CONFIG_VFP=y
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
CONFIG_BINFMT_AOUT=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
# CONFIG_INET_DIAG is not set
CONFIG_IPV6=y
CONFIG_IPV6_PRIVACY=y
# CONFIG_WIRELESS is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_FW_LOADER is not set
CONFIG_MTD=m
CONFIG_MTD_TESTS=m
CONFIG_MTD_REDBOOT_PARTS=m
CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=10000
CONFIG_MTD_AFS_PARTS=m
CONFIG_MTD_AR7_PARTS=m
CONFIG_MTD_CHAR=m
CONFIG_MTD_BLOCK=m
CONFIG_FTL=m
CONFIG_NFTL=m
CONFIG_NFTL_RW=y
CONFIG_INFTL=m
CONFIG_RFD_FTL=m
CONFIG_SSFDC=m
CONFIG_SM_FTL=m
CONFIG_MTD_OOPS=m
CONFIG_MTD_SWAP=m
CONFIG_MTD_CFI=m
CONFIG_MTD_JEDECPROBE=m
CONFIG_MTD_CFI_INTELEXT=m
CONFIG_MTD_CFI_AMDSTD=m
CONFIG_MTD_CFI_STAA=m
CONFIG_MTD_ROM=m
CONFIG_MTD_ABSENT=m
CONFIG_MTD_COMPLEX_MAPPINGS=y
CONFIG_MTD_PHYSMAP=m
CONFIG_MTD_PHYSMAP_COMPAT=y
CONFIG_MTD_PHYSMAP_OF=m
CONFIG_MTD_IMPA7=m
CONFIG_MTD_GPIO_ADDR=m
CONFIG_MTD_PLATRAM=m
CONFIG_MTD_LATCH_ADDR=m
CONFIG_MTD_DATAFLASH=m
CONFIG_MTD_DATAFLASH_WRITE_VERIFY=y
CONFIG_MTD_DATAFLASH_OTP=y
CONFIG_MTD_M25P80=m
# CONFIG_M25PXX_USE_FAST_READ is not set
CONFIG_MTD_SST25L=m
CONFIG_MTD_SLRAM=m
CONFIG_MTD_PHRAM=m
CONFIG_MTD_MTDRAM=m
CONFIG_MTD_BLOCK2MTD=m
CONFIG_MTD_DOC2000=m
CONFIG_MTD_DOC2001=m
CONFIG_MTD_DOC2001PLUS=m
CONFIG_MTD_DOCG3=m
CONFIG_MTD_DOCPROBE_ADVANCED=y
CONFIG_MTD_NAND_ECC_SMC=y
CONFIG_MTD_NAND=m
CONFIG_MTD_NAND_MUSEUM_IDS=y
CONFIG_MTD_NAND_GPIO=m
CONFIG_MTD_NAND_DISKONCHIP=m
CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADVANCED=y
CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE=y
CONFIG_MTD_NAND_DOCG4=m
CONFIG_MTD_NAND_SLC_LPC32XX=m
CONFIG_MTD_NAND_MLC_LPC32XX=m
CONFIG_MTD_NAND_NANDSIM=m
CONFIG_MTD_NAND_PLATFORM=m
CONFIG_MTD_ALAUDA=m
CONFIG_MTD_ONENAND=m
CONFIG_MTD_ONENAND_VERIFY_WRITE=y
CONFIG_MTD_ONENAND_GENERIC=m
CONFIG_MTD_ONENAND_OTP=y
CONFIG_MTD_ONENAND_2X_PROGRAM=y
CONFIG_MTD_ONENAND_SIM=m
CONFIG_MTD_LPDDR=m
CONFIG_MTD_UBI=m
CONFIG_MTD_UBI_GLUEBI=m
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_CRYPTOLOOP=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=1
CONFIG_BLK_DEV_RAM_SIZE=16384
CONFIG_EEPROM_AT25=y
CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=y
CONFIG_NETDEVICES=y
CONFIG_MII=y
# CONFIG_NET_VENDOR_BROADCOM is not set
# CONFIG_NET_VENDOR_CHELSIO is not set
# CONFIG_NET_VENDOR_CIRRUS is not set
# CONFIG_NET_VENDOR_FARADAY is not set
# CONFIG_NET_VENDOR_INTEL is not set
# CONFIG_NET_VENDOR_MARVELL is not set
# CONFIG_NET_VENDOR_MICREL is not set
# CONFIG_NET_VENDOR_MICROCHIP is not set
# CONFIG_NET_VENDOR_NATSEMI is not set
CONFIG_LPC_ENET=y
# CONFIG_NET_VENDOR_SEEQ is not set
# CONFIG_NET_VENDOR_SMSC is not set
# CONFIG_NET_VENDOR_STMICRO is not set
CONFIG_SMSC_PHY=y
# CONFIG_WLAN is not set
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=240
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=320
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_MOUSE is not set
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_LPC32XX=y
# CONFIG_LEGACY_PTYS is not set
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
# CONFIG_HW_RANDOM is not set
CONFIG_I2C=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_PNX=y
CONFIG_SPI=y
CONFIG_SPI_PL022=y
CONFIG_GPIO_SYSFS=y
# CONFIG_HWMON is not set
CONFIG_WATCHDOG=y
CONFIG_PNX4008_WATCHDOG=y
CONFIG_FB=y
CONFIG_FB_ARMCLCD=y
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
CONFIG_SOUND=y
CONFIG_SND=y
CONFIG_SND_SEQUENCER=y
CONFIG_SND_MIXER_OSS=y
CONFIG_SND_PCM_OSS=y
CONFIG_SND_SEQUENCER_OSS=y
# CONFIG_SND_SUPPORT_OLD_API is not set
# CONFIG_SND_VERBOSE_PROCFS is not set
CONFIG_SND_DEBUG=y
CONFIG_SND_DEBUG_VERBOSE=y
# CONFIG_SND_DRIVERS is not set
# CONFIG_SND_ARM is not set
# CONFIG_SND_SPI is not set
CONFIG_SND_SOC=y
# CONFIG_HID_SUPPORT is not set
CONFIG_USB=y
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_STORAGE=y
CONFIG_USB_GADGET=y
CONFIG_USB_LPC32XX=y
CONFIG_USB_MASS_STORAGE=m
CONFIG_USB_G_SERIAL=m
CONFIG_MMC=y
# CONFIG_MMC_BLOCK_BOUNCE is not set
CONFIG_MMC_ARMMMCI=y
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
CONFIG_LEDS_GPIO=y
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
CONFIG_LEDS_TRIGGER_BACKLIGHT=y
CONFIG_LEDS_TRIGGER_GPIO=y
CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_INTF_DEV_UIE_EMUL=y
CONFIG_RTC_DRV_DS1374=y
CONFIG_RTC_DRV_PCF8563=y
CONFIG_RTC_DRV_LPC32XX=y
CONFIG_DMADEVICES=y
CONFIG_AMBA_PL08X=y
CONFIG_STAGING=y
CONFIG_LPC32XX_ADC=y
CONFIG_IIO=y
CONFIG_EXT2_FS=y
CONFIG_AUTOFS4_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_TMPFS=y
CONFIG_JFFS2_FS=m
CONFIG_JFFS2_FS_WBUF_VERIFY=y
CONFIG_JFFS2_FS_XATTR=y
# CONFIG_JFFS2_FS_POSIX_ACL is not set
# CONFIG_JFFS2_FS_SECURITY is not set
CONFIG_UBIFS_FS=m
CONFIG_UBIFS_FS_ADVANCED_COMPR=y
# CONFIG_UBIFS_FS_LZO is not set
# CONFIG_UBIFS_FS_ZLIB is not set
CONFIG_LOGFS=y
CONFIG_NFS_FS=y
CONFIG_ROOT_NFS=y
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=y
CONFIG_NLS_UTF8=y
# CONFIG_SCHED_DEBUG is not set
# CONFIG_DEBUG_PREEMPT is not set
CONFIG_DEBUG_INFO=y
# CONFIG_FTRACE is not set
# CONFIG_ARM_UNWIND is not set
CONFIG_DEBUG_LL=y
CONFIG_EARLY_PRINTK=y
CONFIG_CRYPTO_ANSI_CPRNG=y
# CONFIG_CRYPTO_HW is not set
CONFIG_CRC_CCITT=y
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: This is a digitally signed message part
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20120815/164c2601/attachment-0001.sig>
^ permalink raw reply [flat|nested] 9+ messages in thread
* [PATCH 1/2] mtd: lpc32xx_slc: Adjust to pl08x DMA interface changes
2012-08-15 10:37 ` Artem Bityutskiy
@ 2012-08-16 8:46 ` Roland Stigge
2012-08-16 14:26 ` Roland Stigge
1 sibling, 0 replies; 9+ messages in thread
From: Roland Stigge @ 2012-08-16 8:46 UTC (permalink / raw)
To: linux-arm-kernel
Hi,
On 08/15/2012 12:37 PM, Artem Bityutskiy wrote:
> On Thu, 2012-07-12 at 14:22 +0200, Roland Stigge wrote:
>> This patch adjusts the LPC32xx SLC NAND driver to the new pl08x
>> DMA interface, fixing the compile error resulting from changed
>> pl08x structures.
>>
>> Signed-off-by: Roland Stigge <stigge@antcom.de>
>
> This patch breaks compilation:
>
> ERROR: "pl08x_filter_id" [drivers/mtd/nand/lpc32xx_slc.ko]
> undefined!
>
> Please, send a fix. The defconfig I used is attached.
Thanks for the note. The issue happens on compiling lpc32xx_slc and
lpc32xx_mlc as a module. Caused by pl08x_filter_id not being exported.
Looking at other dma drivers, they have an EXPORT_SYMBOL() for this,
see also
drivers/dma/coh901318.c
drivers/dma/sirf-dma.c
Will post a respective adjustment for drivers/dma/amba-pl08x.c separately.
Roland
^ permalink raw reply [flat|nested] 9+ messages in thread
* [PATCH 1/2] mtd: lpc32xx_slc: Adjust to pl08x DMA interface changes
2012-08-15 10:37 ` Artem Bityutskiy
2012-08-16 8:46 ` Roland Stigge
@ 2012-08-16 14:26 ` Roland Stigge
1 sibling, 0 replies; 9+ messages in thread
From: Roland Stigge @ 2012-08-16 14:26 UTC (permalink / raw)
To: linux-arm-kernel
Hi,
On 08/15/2012 12:37 PM, Artem Bityutskiy wrote:
> On Thu, 2012-07-12 at 14:22 +0200, Roland Stigge wrote:
>> This patch adjusts the LPC32xx SLC NAND driver to the new pl08x
>> DMA interface, fixing the compile error resulting from changed
>> pl08x structures.
>>
>> Signed-off-by: Roland Stigge <stigge@antcom.de>
>
> This patch breaks compilation:
>
> ERROR: "pl08x_filter_id" [drivers/mtd/nand/lpc32xx_slc.ko]
> undefined!
>
> Please, send a fix. The defconfig I used is attached.
Please see my just posted patches:
mtd: lpc32xx_slc: Make driver independent of AMBA DMA engine driver
mtd: lpc32xx_mlc: Make driver independent of AMBA DMA engine driver
This also fixes the above problem by getting rid of the reference to
pl08x_filter_id.
Thanks,
Roland
^ permalink raw reply [flat|nested] 9+ messages in thread
end of thread, other threads:[~2012-08-16 14:26 UTC | newest]
Thread overview: 9+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2012-07-12 12:22 [PATCH] ARM: LPC32xx: Adjust to pl08x DMA interface changes Roland Stigge
2012-07-12 12:22 ` [PATCH 1/2] mtd: lpc32xx_slc: " Roland Stigge
2012-07-13 12:52 ` Alexandre Pereira da Silva
2012-08-15 10:37 ` Artem Bityutskiy
2012-08-16 8:46 ` Roland Stigge
2012-08-16 14:26 ` Roland Stigge
2012-07-12 12:22 ` [PATCH 2/2] mtd: lpc32xx_mlc: " Roland Stigge
2012-07-13 12:51 ` Alexandre Pereira da Silva
2012-07-13 12:51 ` [PATCH] ARM: LPC32xx: " Alexandre Pereira da Silva
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).