[PATCH] serial: pl011: honour serial aliases in device tree

[PATCH] serial: pl011: honour serial aliases in device tree

[Matthew Leach]

If the order of UART nodes is changed in the device tree, then tty dev
devices are attached to different serial ports causing the console to
be directed to a different physical serial port. The "serial" aliases
in the device tree should prevent this.

This patch ensures that the UART driver creates tty devices that
honour these aliases if a device tree is present.

Signed-off-by: Matthew Leach <matthew.leach@arm.com>
---
 drivers/tty/serial/amba-pl011.c |   39 +++++++++++++++++++++++++++++++++++++++
 1 files changed, 39 insertions(+), 0 deletions(-)

diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c
index c17923e..5919599 100644
--- a/drivers/tty/serial/amba-pl011.c
+++ b/drivers/tty/serial/amba-pl011.c
@@ -52,6 +52,7 @@
 #include <linux/scatterlist.h>
 #include <linux/delay.h>
 #include <linux/types.h>
+#include <linux/of_device.h>
 #include <linux/pinctrl/consumer.h>
 
 #include <asm/io.h>
@@ -1869,6 +1870,42 @@ static struct uart_driver amba_reg = {
 	.cons			= AMBA_CONSOLE,
 };
 
+#ifdef CONFIG_OF
+static int pl011_probe_dt_alias(int index, struct device *dev)
+{
+	struct device_node *np;
+	static bool seen_dev_with_alias = false;
+	static bool seen_dev_without_alias = false;
+	int ret = index;
+
+	np = dev->of_node;
+	if (!np)
+		return ret;
+
+	ret = of_alias_get_id(np, "serial");
+	if (IS_ERR_VALUE(ret)) {
+		seen_dev_without_alias = true;
+		ret = index;
+	} else {
+		seen_dev_with_alias = true;
+		if (ret >= ARRAY_SIZE(amba_ports) || amba_ports[ret] != NULL) {
+			dev_warn(dev, "requested serial port %d  not available.\n", ret);
+			ret = index;
+		}
+	}
+
+	if (seen_dev_with_alias && seen_dev_without_alias)
+		dev_warn(dev, "aliased and non-aliased serial devices found in device tree. Serial port enumeration may be unpredictable.\n");
+
+	return ret;
+}
+#else
+static int pl011_probe_dt_alias(int index, struct device *dev)
+{
+	return index;
+}
+#endif
+
 static int pl011_probe(struct amba_device *dev, const struct amba_id *id)
 {
 	struct uart_amba_port *uap;
@@ -1891,6 +1928,8 @@ static int pl011_probe(struct amba_device *dev, const struct amba_id *id)
 		goto out;
 	}
 
+	i = pl011_probe_dt_alias(i, &dev->dev);
+
 	base = ioremap(dev->res.start, resource_size(&dev->res));
 	if (!base) {
 		ret = -ENOMEM;
-- 
1.7.0.4

[PATCH] serial: pl011: honour serial aliases in device tree

[Rob Herring]

On 08/21/2012 05:18 AM, Matthew Leach wrote:
> If the order of UART nodes is changed in the device tree, then tty dev
> devices are attached to different serial ports causing the console to
> be directed to a different physical serial port. The "serial" aliases
> in the device tree should prevent this.
> 
> This patch ensures that the UART driver creates tty devices that
> honour these aliases if a device tree is present.
> 
> Signed-off-by: Matthew Leach <matthew.leach@arm.com>

One comment/question below, but otherwise:

Acked-by: Rob Herring <rob.herring@calxeda.com>

> ---
>  drivers/tty/serial/amba-pl011.c |   39 +++++++++++++++++++++++++++++++++++++++
>  1 files changed, 39 insertions(+), 0 deletions(-)
> 
> diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c
> index c17923e..5919599 100644
> --- a/drivers/tty/serial/amba-pl011.c
> +++ b/drivers/tty/serial/amba-pl011.c
> @@ -52,6 +52,7 @@
>  #include <linux/scatterlist.h>
>  #include <linux/delay.h>
>  #include <linux/types.h>
> +#include <linux/of_device.h>
>  #include <linux/pinctrl/consumer.h>
>  
>  #include <asm/io.h>
> @@ -1869,6 +1870,42 @@ static struct uart_driver amba_reg = {
>  	.cons			= AMBA_CONSOLE,
>  };
>  
> +#ifdef CONFIG_OF

Now that we have IS_ENABLED, perhaps we want to put this inside the
function instead?

if (!IS_ENABLED(CONFIG_OF))
	return index;


> +static int pl011_probe_dt_alias(int index, struct device *dev)
> +{
> +	struct device_node *np;
> +	static bool seen_dev_with_alias = false;
> +	static bool seen_dev_without_alias = false;
> +	int ret = index;
> +
> +	np = dev->of_node;
> +	if (!np)
> +		return ret;
> +
> +	ret = of_alias_get_id(np, "serial");
> +	if (IS_ERR_VALUE(ret)) {
> +		seen_dev_without_alias = true;
> +		ret = index;
> +	} else {
> +		seen_dev_with_alias = true;
> +		if (ret >= ARRAY_SIZE(amba_ports) || amba_ports[ret] != NULL) {
> +			dev_warn(dev, "requested serial port %d  not available.\n", ret);
> +			ret = index;
> +		}
> +	}
> +
> +	if (seen_dev_with_alias && seen_dev_without_alias)
> +		dev_warn(dev, "aliased and non-aliased serial devices found in device tree. Serial port enumeration may be unpredictable.\n");
> +
> +	return ret;
> +}
> +#else
> +static int pl011_probe_dt_alias(int index, struct device *dev)
> +{
> +	return index;
> +}
> +#endif
> +
>  static int pl011_probe(struct amba_device *dev, const struct amba_id *id)
>  {
>  	struct uart_amba_port *uap;
> @@ -1891,6 +1928,8 @@ static int pl011_probe(struct amba_device *dev, const struct amba_id *id)
>  		goto out;
>  	}
>  
> +	i = pl011_probe_dt_alias(i, &dev->dev);
> +
>  	base = ioremap(dev->res.start, resource_size(&dev->res));
>  	if (!base) {
>  		ret = -ENOMEM;
>