From mboxrd@z Thu Jan 1 00:00:00 1970 From: s.nawrocki@samsung.com (Sylwester Nawrocki) Date: Mon, 03 Sep 2012 10:54:06 +0200 Subject: [PATCH] ARM: S3C24XX: Add WIZnet W5300E01-ARM board support In-Reply-To: References: <1346653236-19728-1-git-send-email-kth3321@gmail.com> Message-ID: <5044702E.3070209@samsung.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Hi, On 09/03/2012 09:56 AM, Vasily Khoruzhick wrote: >> +static void __init w5300e01_init(void) >> +{ >> + s3c_nand_set_platdata(&w5300e01_nand_info); >> + platform_add_devices(w5300e01_devices, ARRAY_SIZE(w5300e01_devices)); >> + >> + /* W5300 interrupt pin. */ >> + s3c2410_gpio_cfgpin(S3C2410_GPF(0), S3C2410_GPIO_IRQ); >> + >> + s3c2410_gpio_cfgpin(S3C2410_GPF(4), S3C2410_GPIO_OUTPUT); >> + s3c2410_gpio_cfgpin(S3C2410_GPF(5), S3C2410_GPIO_OUTPUT); >> + s3c2410_gpio_cfgpin(S3C2410_GPF(6), S3C2410_GPIO_OUTPUT); >> + s3c2410_gpio_cfgpin(S3C2410_GPF(7), S3C2410_GPIO_OUTPUT); >> + >> + s3c2410_gpio_setpin(S3C2410_GPF(0), 1); >> + s3c2410_gpio_setpin(S3C2410_GPF(4), 1); >> + s3c2410_gpio_setpin(S3C2410_GPF(5), 1); >> + s3c2410_gpio_setpin(S3C2410_GPF(6), 1); >> + s3c2410_gpio_setpin(S3C2410_GPF(7), 1); >> + > > Please use gpiolib API, legacy s3c2410_gpio_* API will be removed soon. Right, you'll find some information about this in Documentation/arm/Samsung-S3C24XX/GPIO.txt. These links may be useful as well: http://www.mail-archive.com/linux-samsung-soc at vger.kernel.org/msg11985.html http://www.spinics.net/lists/arm-kernel/msg192119.html -- Regards, Sylwester