From mboxrd@z Thu Jan 1 00:00:00 1970 From: jh80.chung@samsung.com (Jaehoon Chung) Date: Wed, 05 Sep 2012 17:36:52 +0900 Subject: [PATCH v2 1/5] mmc: host: sdhci-s3c: Add broken-voltage DT property for broken voltage quirk In-Reply-To: <1346748609-11115-2-git-send-email-t.figa@samsung.com> References: <1346748609-11115-1-git-send-email-t.figa@samsung.com> <1346748609-11115-2-git-send-email-t.figa@samsung.com> Message-ID: <50470F24.1010506@samsung.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Acked-by: Jaehoon Chung On 09/04/2012 05:50 PM, Tomasz Figa wrote: > Some boards use fixed voltage regulator for vmmc supply (e.g. for eMMC > memories). MMC_CAP2_BROKEN_VOLTAGE must be enabled for them to operate > correctly. > > Cc: Ben Dooks > Cc: Chris Ball > CC: linux-mmc at vger.kernel.org > Signed-off-by: Tomasz Figa > Signed-off-by: Kyungmin Park > --- > Documentation/devicetree/bindings/mmc/mmc.txt | 1 + > drivers/mmc/host/sdhci-s3c.c | 3 +++ > 2 files changed, 4 insertions(+) > > diff --git a/Documentation/devicetree/bindings/mmc/mmc.txt b/Documentation/devicetree/bindings/mmc/mmc.txt > index 8a6811f..ecbde68 100644 > --- a/Documentation/devicetree/bindings/mmc/mmc.txt > +++ b/Documentation/devicetree/bindings/mmc/mmc.txt > @@ -16,6 +16,7 @@ Optional properties: > - wp-inverted: when present, polarity on the wp gpio line is inverted > - non-removable: non-removable slot (like eMMC) > - max-frequency: maximum operating clock frequency > +- broken-voltage: vmmc regulator does not allow voltage control > > Example: > > diff --git a/drivers/mmc/host/sdhci-s3c.c b/drivers/mmc/host/sdhci-s3c.c > index 445910e..39715b8 100644 > --- a/drivers/mmc/host/sdhci-s3c.c > +++ b/drivers/mmc/host/sdhci-s3c.c > @@ -443,6 +443,9 @@ static int __devinit sdhci_s3c_parse_dt(struct device *dev, > if (!ourhost->gpios) > return -ENOMEM; > > + if (of_get_property(node, "broken-voltage", 0)) > + pdata->host_caps2 |= MMC_CAP2_BROKEN_VOLTAGE; > + > /* get the card detection method */ > if (of_get_property(node, "broken-cd", 0)) { > pdata->cd_type = S3C_SDHCI_CD_NONE; >