[PATCH 0/2] arm/dts: AM33XX: Add reg and interrupt property for all nodes

linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed

* [PATCH 0/2] arm/dts: AM33XX: Add reg and interrupt property for all nodes
@ 2012-08-27 12:31 Vaibhav Hiremath
  2012-08-27 12:31 ` [PATCH 1/2] arm/dts: AM33XX: Convert all hex numbers to lower-case Vaibhav Hiremath
                   ` (2 more replies)
  0 siblings, 3 replies; 4+ messages in thread
From: Vaibhav Hiremath @ 2012-08-27 12:31 UTC (permalink / raw)
  To: linux-arm-kernel

This series is trivial patch-series and should be considered as
preparation for the future where we supposed to get rid of
hwmod dependency.

1/2: Converts all hex numbers to lowercase, fixing inconsistency
2/2: Add reg and interrupt property  to all device/module nodes inside
     DTS files. 

Although currently hwmod overwrites resources, I have validated this
patch series by changing the omap_device layer to respect DT resources
and boot Tested on BeagleBone platform.
I will be submitting the changes for omap_device layer as well, still
needs to fix on certain things.

Vaibhav Hiremath (2):
  arm/dts: AM33XX: Convert all hex numbers to lower-case
  arm/dts: AM33XX: Specify reg and interrupt property for all nodes

 arch/arm/boot/dts/am335x-bone.dts |    2 +-
 arch/arm/boot/dts/am335x-evm.dts  |    2 +-
 arch/arm/boot/dts/am33xx.dtsi     |   62 +++++++++++++++++++++++++++++++------
 3 files changed, 54 insertions(+), 12 deletions(-)

^ permalink raw reply	[flat|nested] 4+ messages in thread

* [PATCH 1/2] arm/dts: AM33XX: Convert all hex numbers to lower-case
  2012-08-27 12:31 [PATCH 0/2] arm/dts: AM33XX: Add reg and interrupt property for all nodes Vaibhav Hiremath
@ 2012-08-27 12:31 ` Vaibhav Hiremath
  2012-08-27 12:31 ` [PATCH 2/2] arm/dts: AM33XX: Specify reg and interrupt property for all nodes Vaibhav Hiremath
  2012-09-06 13:57 ` [PATCH 0/2] arm/dts: AM33XX: Add " Benoit Cousson
  2 siblings, 0 replies; 4+ messages in thread
From: Vaibhav Hiremath @ 2012-08-27 12:31 UTC (permalink / raw)
  To: linux-arm-kernel

To make it consistent, convert all hex number presentation
to lower-case from all am33xx specific nodes.

Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com>
Cc: Tony Lindgren <tony@atomide.com>
---
 arch/arm/boot/dts/am335x-bone.dts |    2 +-
 arch/arm/boot/dts/am335x-evm.dts  |    2 +-
 arch/arm/boot/dts/am33xx.dtsi     |   20 ++++++++++----------
 3 files changed, 12 insertions(+), 12 deletions(-)

diff --git a/arch/arm/boot/dts/am335x-bone.dts b/arch/arm/boot/dts/am335x-bone.dts
index a7906cb..c64f7fa 100644
--- a/arch/arm/boot/dts/am335x-bone.dts
+++ b/arch/arm/boot/dts/am335x-bone.dts
@@ -19,7 +19,7 @@
 	};
 
 	ocp {
-		uart1: serial at 44E09000 {
+		uart1: serial at 44e09000 {
 			status = "okay";
 		};
 	};
diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts
index 5dd8a6b..8963f20 100644
--- a/arch/arm/boot/dts/am335x-evm.dts
+++ b/arch/arm/boot/dts/am335x-evm.dts
@@ -19,7 +19,7 @@
 	};
 
 	ocp {
-		uart1: serial at 44E09000 {
+		uart1: serial at 44e09000 {
 			status = "okay";
 		};
 	};
diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi
index dde76f7..be43511 100644
--- a/arch/arm/boot/dts/am33xx.dtsi
+++ b/arch/arm/boot/dts/am33xx.dtsi
@@ -71,7 +71,7 @@
 			#interrupt-cells = <1>;
 		};
 
-		gpio2: gpio at 4804C000 {
+		gpio2: gpio at 4804c000 {
 			compatible = "ti,omap4-gpio";
 			ti,hwmods = "gpio2";
 			gpio-controller;
@@ -80,7 +80,7 @@
 			#interrupt-cells = <1>;
 		};
 
-		gpio3: gpio at 481AC000 {
+		gpio3: gpio at 481ac000 {
 			compatible = "ti,omap4-gpio";
 			ti,hwmods = "gpio3";
 			gpio-controller;
@@ -89,7 +89,7 @@
 			#interrupt-cells = <1>;
 		};
 
-		gpio4: gpio at 481AE000 {
+		gpio4: gpio at 481ae000 {
 			compatible = "ti,omap4-gpio";
 			ti,hwmods = "gpio4";
 			gpio-controller;
@@ -98,7 +98,7 @@
 			#interrupt-cells = <1>;
 		};
 
-		uart1: serial at 44E09000 {
+		uart1: serial at 44e09000 {
 			compatible = "ti,omap3-uart";
 			ti,hwmods = "uart1";
 			clock-frequency = <48000000>;
@@ -119,28 +119,28 @@
 			status = "disabled";
 		};
 
-		uart4: serial at 481A6000 {
+		uart4: serial at 481a6000 {
 			compatible = "ti,omap3-uart";
 			ti,hwmods = "uart4";
 			clock-frequency = <48000000>;
 			status = "disabled";
 		};
 
-		uart5: serial at 481A8000 {
+		uart5: serial at 481a8000 {
 			compatible = "ti,omap3-uart";
 			ti,hwmods = "uart5";
 			clock-frequency = <48000000>;
 			status = "disabled";
 		};
 
-		uart6: serial at 481AA000 {
+		uart6: serial at 481aa000 {
 			compatible = "ti,omap3-uart";
 			ti,hwmods = "uart6";
 			clock-frequency = <48000000>;
 			status = "disabled";
 		};
 
-		i2c1: i2c at 44E0B000 {
+		i2c1: i2c at 44e0b000 {
 			compatible = "ti,omap4-i2c";
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -148,7 +148,7 @@
 			status = "disabled";
 		};
 
-		i2c2: i2c at 4802A000 {
+		i2c2: i2c at 4802a000 {
 			compatible = "ti,omap4-i2c";
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -156,7 +156,7 @@
 			status = "disabled";
 		};
 
-		i2c3: i2c at 4819C000 {
+		i2c3: i2c at 4819c000 {
 			compatible = "ti,omap4-i2c";
 			#address-cells = <1>;
 			#size-cells = <0>;
-- 
1.7.0.4

^ permalink raw reply related	[flat|nested] 4+ messages in thread

* [PATCH 2/2] arm/dts: AM33XX: Specify reg and interrupt property for all nodes
  2012-08-27 12:31 [PATCH 0/2] arm/dts: AM33XX: Add reg and interrupt property for all nodes Vaibhav Hiremath
  2012-08-27 12:31 ` [PATCH 1/2] arm/dts: AM33XX: Convert all hex numbers to lower-case Vaibhav Hiremath
@ 2012-08-27 12:31 ` Vaibhav Hiremath
  2012-09-06 13:57 ` [PATCH 0/2] arm/dts: AM33XX: Add " Benoit Cousson
  2 siblings, 0 replies; 4+ messages in thread
From: Vaibhav Hiremath @ 2012-08-27 12:31 UTC (permalink / raw)
  To: linux-arm-kernel

The device/node resources (like, IORESOURCE_MEM and IORESOURCE_IRQ)
are overwritten by hwmod resources, due to all known reasons but
that should not be the reason for not providing all the information
in the DTS blob. Ideally we should use DTS resource and use HWMOD
framework wherever required and for only specific things.

Newer platforms like, OMAP5 and AM33XX, we only support DT boot mode,
so this patch is preparation for the future where we supposed to get
rid of hwmod dependency anyway.

Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Benoit Cousson <b-cousson@ti.com>
---
 arch/arm/boot/dts/am33xx.dtsi |   42 +++++++++++++++++++++++++++++++++++++++++
 1 files changed, 42 insertions(+), 0 deletions(-)

diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi
index be43511..f0642e1 100644
--- a/arch/arm/boot/dts/am33xx.dtsi
+++ b/arch/arm/boot/dts/am33xx.dtsi
@@ -69,6 +69,9 @@
 			#gpio-cells = <2>;
 			interrupt-controller;
 			#interrupt-cells = <1>;
+			reg = <0x44e07000 0x1000>;
+			interrupt-parent = <&intc>;
+			interrupts = <96>;
 		};
 
 		gpio2: gpio at 4804c000 {
@@ -78,6 +81,9 @@
 			#gpio-cells = <2>;
 			interrupt-controller;
 			#interrupt-cells = <1>;
+			reg = <0x4804c000 0x1000>;
+			interrupt-parent = <&intc>;
+			interrupts = <98>;
 		};
 
 		gpio3: gpio at 481ac000 {
@@ -87,6 +93,9 @@
 			#gpio-cells = <2>;
 			interrupt-controller;
 			#interrupt-cells = <1>;
+			reg = <0x481ac000 0x1000>;
+			interrupt-parent = <&intc>;
+			interrupts = <32>;
 		};
 
 		gpio4: gpio at 481ae000 {
@@ -96,12 +105,18 @@
 			#gpio-cells = <2>;
 			interrupt-controller;
 			#interrupt-cells = <1>;
+			reg = <0x481ae000 0x1000>;
+			interrupt-parent = <&intc>;
+			interrupts = <62>;
 		};
 
 		uart1: serial at 44e09000 {
 			compatible = "ti,omap3-uart";
 			ti,hwmods = "uart1";
 			clock-frequency = <48000000>;
+			reg = <0x44e09000 0x2000>;
+ 			interrupt-parent = <&intc>;
+ 			interrupts = <72>;
 			status = "disabled";
 		};
 
@@ -109,6 +124,9 @@
 			compatible = "ti,omap3-uart";
 			ti,hwmods = "uart2";
 			clock-frequency = <48000000>;
+			reg = <0x48022000 0x2000>;
+ 			interrupt-parent = <&intc>;
+ 			interrupts = <73>;
 			status = "disabled";
 		};
 
@@ -116,6 +134,9 @@
 			compatible = "ti,omap3-uart";
 			ti,hwmods = "uart3";
 			clock-frequency = <48000000>;
+			reg = <0x48024000 0x2000>;
+ 			interrupt-parent = <&intc>;
+ 			interrupts = <74>;
 			status = "disabled";
 		};
 
@@ -123,6 +144,9 @@
 			compatible = "ti,omap3-uart";
 			ti,hwmods = "uart4";
 			clock-frequency = <48000000>;
+			reg = <0x481a6000 0x2000>;
+ 			interrupt-parent = <&intc>;
+ 			interrupts = <44>;
 			status = "disabled";
 		};
 
@@ -130,6 +154,9 @@
 			compatible = "ti,omap3-uart";
 			ti,hwmods = "uart5";
 			clock-frequency = <48000000>;
+			reg = <0x481a8000 0x2000>;
+ 			interrupt-parent = <&intc>;
+ 			interrupts = <45>;
 			status = "disabled";
 		};
 
@@ -137,6 +164,9 @@
 			compatible = "ti,omap3-uart";
 			ti,hwmods = "uart6";
 			clock-frequency = <48000000>;
+			reg = <0x481aa000 0x2000>;
+ 			interrupt-parent = <&intc>;
+ 			interrupts = <46>;
 			status = "disabled";
 		};
 
@@ -145,6 +175,9 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			ti,hwmods = "i2c1";
+			reg = <0x44e0b000 0x1000>;
+			interrupt-parent = <&intc>;
+			interrupts = <70>;
 			status = "disabled";
 		};
 
@@ -153,6 +186,9 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			ti,hwmods = "i2c2";
+			reg = <0x4802a000 0x1000>;
+			interrupt-parent = <&intc>;
+			interrupts = <71>;
 			status = "disabled";
 		};
 
@@ -161,12 +197,18 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			ti,hwmods = "i2c3";
+			reg = <0x4819c000 0x1000>;
+			interrupt-parent = <&intc>;
+			interrupts = <30>;
 			status = "disabled";
 		};
 
 		wdt2: wdt at 44e35000 {
 			compatible = "ti,omap3-wdt";
 			ti,hwmods = "wd_timer2";
+			reg = <0x44e35000 0x1000>;
+			interrupt-parent = <&intc>;
+			interrupts = <91>;
 		};
 	};
 };
-- 
1.7.0.4

^ permalink raw reply related	[flat|nested] 4+ messages in thread

* [PATCH 0/2] arm/dts: AM33XX: Add reg and interrupt property for all nodes
  2012-08-27 12:31 [PATCH 0/2] arm/dts: AM33XX: Add reg and interrupt property for all nodes Vaibhav Hiremath
  2012-08-27 12:31 ` [PATCH 1/2] arm/dts: AM33XX: Convert all hex numbers to lower-case Vaibhav Hiremath
  2012-08-27 12:31 ` [PATCH 2/2] arm/dts: AM33XX: Specify reg and interrupt property for all nodes Vaibhav Hiremath
@ 2012-09-06 13:57 ` Benoit Cousson
  2 siblings, 0 replies; 4+ messages in thread
From: Benoit Cousson @ 2012-09-06 13:57 UTC (permalink / raw)
  To: linux-arm-kernel

Hi Vaihbav,

On 08/27/2012 02:31 PM, Vaibhav Hiremath wrote:
> This series is trivial patch-series and should be considered as
> preparation for the future where we supposed to get rid of
> hwmod dependency.
> 
> 1/2: Converts all hex numbers to lowercase, fixing inconsistency
> 2/2: Add reg and interrupt property  to all device/module nodes inside
>      DTS files. 
> 
> Although currently hwmod overwrites resources, I have validated this
> patch series by changing the omap_device layer to respect DT resources
> and boot Tested on BeagleBone platform.
> I will be submitting the changes for omap_device layer as well, still
> needs to fix on certain things.
> 
> Vaibhav Hiremath (2):
>   arm/dts: AM33XX: Convert all hex numbers to lower-case
>   arm/dts: AM33XX: Specify reg and interrupt property for all nodes
> 
>  arch/arm/boot/dts/am335x-bone.dts |    2 +-
>  arch/arm/boot/dts/am335x-evm.dts  |    2 +-
>  arch/arm/boot/dts/am33xx.dtsi     |   62 +++++++++++++++++++++++++++++++------
>  3 files changed, 54 insertions(+), 12 deletions(-)

I'll queue that along with the other DT stuff for 3.7.

Thanks,
Benoit

^ permalink raw reply	[flat|nested] 4+ messages in thread

end of thread, other threads:[~2012-09-06 13:57 UTC | newest]

Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2012-08-27 12:31 [PATCH 0/2] arm/dts: AM33XX: Add reg and interrupt property for all nodes Vaibhav Hiremath
2012-08-27 12:31 ` [PATCH 1/2] arm/dts: AM33XX: Convert all hex numbers to lower-case Vaibhav Hiremath
2012-08-27 12:31 ` [PATCH 2/2] arm/dts: AM33XX: Specify reg and interrupt property for all nodes Vaibhav Hiremath
2012-09-06 13:57 ` [PATCH 0/2] arm/dts: AM33XX: Add " Benoit Cousson

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).