[PATCH] arm/dts: omap: Add omap-usb2 dt data

[PATCH] arm/dts: omap: Add omap-usb2 dt data

[Kishon Vijay Abraham I]

Add omap-usb2 data node in omap4 device tree file. Since omap-usb2 is
connected to ocp2scp, omap-usb2 dt data is added as a child node
of ocp2scp.

Acked-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
Applies on
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc.git for-next
 arch/arm/boot/dts/omap4.dtsi |    5 +++++
 1 file changed, 5 insertions(+)

diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi
index 8a780b2..bdc21f1 100644
--- a/arch/arm/boot/dts/omap4.dtsi
+++ b/arch/arm/boot/dts/omap4.dtsi
@@ -302,6 +302,11 @@
 			#size-cells = <1>;
 			ranges;
 			ti,hwmods = "ocp2scp_usb_phy";
+			usb2phy at 4a0ad080 {
+				compatible = "ti,omap-usb2";
+				reg = <0x4a0ad080 0x58>,
+				      <0x4a002300 0x4>;
+			};
 		};
 	};
 };
-- 
1.7.9.5

[PATCH] arm/dts: omap: Add omap-usb2 dt data

[Benoit Cousson]

Hi Kishon,

On 09/11/2012 08:12 AM, Kishon Vijay Abraham I wrote:
> Add omap-usb2 data node in omap4 device tree file. Since omap-usb2 is
> connected to ocp2scp, omap-usb2 dt data is added as a child node
> of ocp2scp.

Could you add more details about the omap-usb2?

You must update the Documentation binding with that compatible name.
Is it already part of the driver serie? The MUSB driver is referring to
"ti,musb-omap2430" only.

> 
> Acked-by: Felipe Balbi <balbi@ti.com>
> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
> ---
> Applies on
> git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc.git for-next
>  arch/arm/boot/dts/omap4.dtsi |    5 +++++
>  1 file changed, 5 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi
> index 8a780b2..bdc21f1 100644
> --- a/arch/arm/boot/dts/omap4.dtsi
> +++ b/arch/arm/boot/dts/omap4.dtsi
> @@ -302,6 +302,11 @@
>  			#size-cells = <1>;
>  			ranges;
>  			ti,hwmods = "ocp2scp_usb_phy";

There is no ocp2scp_usb_phy in the current omap4.dtsi?
What base did you used?

You have to use lo/devel-dt branch as a base. All the latest DTS patches
an in there for 3.7.

Regards,
Benoit

> +			usb2phy at 4a0ad080 {
> +				compatible = "ti,omap-usb2";
> +				reg = <0x4a0ad080 0x58>,
> +				      <0x4a002300 0x4>;
> +			};
>  		};
>  	};
>  };
> 

[PATCH] arm/dts: omap: Add omap-usb2 dt data

[ABRAHAM, KISHON VIJAY]

Hi,

On Tue, Sep 11, 2012 at 1:53 PM, Benoit Cousson <b-cousson@ti.com> wrote:
> Hi Kishon,
>
> On 09/11/2012 08:12 AM, Kishon Vijay Abraham I wrote:
>> Add omap-usb2 data node in omap4 device tree file. Since omap-usb2 is
>> connected to ocp2scp, omap-usb2 dt data is added as a child node
>> of ocp2scp.
>
> Could you add more details about the omap-usb2?
I think information about omap-usb2 driver is added in
 *usb: phy: add a new driver for omap usb2 phy.*.
Do you want the same thing to be added here?
>
> You must update the Documentation binding with that compatible name.
Yes. It's part of *usb: phy: add a new driver for omap usb2 phy.*
> Is it already part of the driver serie? The MUSB driver is referring to
> "ti,musb-omap2430" only.

Will correct the Documentation for MUSB.

Thanks
Kishon