From: marc.zyngier@arm.com (Marc Zyngier)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v4 02/24] xen/arm: hypercalls
Date: Fri, 14 Sep 2012 14:45:36 +0100 [thread overview]
Message-ID: <50533500.2020606@arm.com> (raw)
In-Reply-To: <1347621207-11294-2-git-send-email-stefano.stabellini@eu.citrix.com>
On 14/09/12 12:13, Stefano Stabellini wrote:
> Use r12 to pass the hypercall number to the hypervisor.
>
> We need a register to pass the hypercall number because we might not
> know it at compile time and HVC only takes an immediate argument.
>
> Among the available registers r12 seems to be the best choice because it
> is defined as "intra-procedure call scratch register".
>
> Use the ISS to pass an hypervisor specific tag.
>
>
> Changes in v2:
> - define an HYPERCALL macro for 5 arguments hypercall wrappers, even if
> at the moment is unused;
> - use ldm instead of pop;
> - fix up comments.
>
>
> Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
> ---
> arch/arm/include/asm/xen/hypercall.h | 50 ++++++++++++++++
> arch/arm/xen/Makefile | 2 +-
> arch/arm/xen/hypercall.S | 106 ++++++++++++++++++++++++++++++++++
> 3 files changed, 157 insertions(+), 1 deletions(-)
> create mode 100644 arch/arm/include/asm/xen/hypercall.h
> create mode 100644 arch/arm/xen/hypercall.S
>
> diff --git a/arch/arm/include/asm/xen/hypercall.h b/arch/arm/include/asm/xen/hypercall.h
> new file mode 100644
> index 0000000..4ac0624
> --- /dev/null
> +++ b/arch/arm/include/asm/xen/hypercall.h
> @@ -0,0 +1,50 @@
> +/******************************************************************************
> + * hypercall.h
> + *
> + * Linux-specific hypervisor handling.
> + *
> + * Stefano Stabellini <stefano.stabellini@eu.citrix.com>, Citrix, 2012
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License version 2
> + * as published by the Free Software Foundation; or, when distributed
> + * separately from the Linux kernel or incorporated into other
> + * software packages, subject to the following license:
> + *
> + * Permission is hereby granted, free of charge, to any person obtaining a copy
> + * of this source file (the "Software"), to deal in the Software without
> + * restriction, including without limitation the rights to use, copy, modify,
> + * merge, publish, distribute, sublicense, and/or sell copies of the Software,
> + * and to permit persons to whom the Software is furnished to do so, subject to
> + * the following conditions:
> + *
> + * The above copyright notice and this permission notice shall be included in
> + * all copies or substantial portions of the Software.
> + *
> + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
> + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
> + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
> + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
> + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
> + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
> + * IN THE SOFTWARE.
> + */
> +
> +#ifndef _ASM_ARM_XEN_HYPERCALL_H
> +#define _ASM_ARM_XEN_HYPERCALL_H
> +
> +#include <xen/interface/xen.h>
> +
> +long privcmd_call(unsigned call, unsigned long a1,
> + unsigned long a2, unsigned long a3,
> + unsigned long a4, unsigned long a5);
> +int HYPERVISOR_xen_version(int cmd, void *arg);
> +int HYPERVISOR_console_io(int cmd, int count, char *str);
> +int HYPERVISOR_grant_table_op(unsigned int cmd, void *uop, unsigned int count);
> +int HYPERVISOR_sched_op(int cmd, void *arg);
> +int HYPERVISOR_event_channel_op(int cmd, void *arg);
> +unsigned long HYPERVISOR_hvm_op(int op, void *arg);
> +int HYPERVISOR_memory_op(unsigned int cmd, void *arg);
> +int HYPERVISOR_physdev_op(int cmd, void *arg);
> +
> +#endif /* _ASM_ARM_XEN_HYPERCALL_H */
> diff --git a/arch/arm/xen/Makefile b/arch/arm/xen/Makefile
> index 0bad594..b9d6acc 100644
> --- a/arch/arm/xen/Makefile
> +++ b/arch/arm/xen/Makefile
> @@ -1 +1 @@
> -obj-y := enlighten.o
> +obj-y := enlighten.o hypercall.o
> diff --git a/arch/arm/xen/hypercall.S b/arch/arm/xen/hypercall.S
> new file mode 100644
> index 0000000..074f5ed
> --- /dev/null
> +++ b/arch/arm/xen/hypercall.S
> @@ -0,0 +1,106 @@
> +/******************************************************************************
> + * hypercall.S
> + *
> + * Xen hypercall wrappers
> + *
> + * Stefano Stabellini <stefano.stabellini@eu.citrix.com>, Citrix, 2012
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License version 2
> + * as published by the Free Software Foundation; or, when distributed
> + * separately from the Linux kernel or incorporated into other
> + * software packages, subject to the following license:
> + *
> + * Permission is hereby granted, free of charge, to any person obtaining a copy
> + * of this source file (the "Software"), to deal in the Software without
> + * restriction, including without limitation the rights to use, copy, modify,
> + * merge, publish, distribute, sublicense, and/or sell copies of the Software,
> + * and to permit persons to whom the Software is furnished to do so, subject to
> + * the following conditions:
> + *
> + * The above copyright notice and this permission notice shall be included in
> + * all copies or substantial portions of the Software.
> + *
> + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
> + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
> + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
> + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
> + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
> + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
> + * IN THE SOFTWARE.
> + */
> +
> +/*
> + * The Xen hypercall calling convention is very similar to the ARM
> + * procedure calling convention: the first paramter is passed in r0, the
> + * second in r1, the third in r2 and the fourth in r3. Considering that
> + * Xen hypercalls have 5 arguments at most, the fifth paramter is passed
> + * in r4, differently from the procedure calling convention of using the
> + * stack for that case.
> + *
> + * The hypercall number is passed in r12.
> + *
> + * The return value is in r0.
> + *
> + * The hvc ISS is required to be 0xEA1, that is the Xen specific ARM
> + * hypercall tag.
> + */
> +
> +#include <linux/linkage.h>
> +#include <asm/assembler.h>
> +#include <xen/interface/xen.h>
> +
> +
> +/* HVC 0xEA1 */
> +#ifdef CONFIG_THUMB2_KERNEL
> +#define xen_hvc .word 0xf7e08ea1
> +#else
> +#define xen_hvc .word 0xe140ea71
> +#endif
You should consider using Dave Martin's opcode injection series for
that. The patches are already in Russell's for-next branch.
M.
--
Jazz is not dead. It just smells funny...
next prev parent reply other threads:[~2012-09-14 13:45 UTC|newest]
Thread overview: 72+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-09-14 11:12 [PATCH v4 00/24] Introduce Xen support on ARM (based on 3.6-rc5) Stefano Stabellini
2012-09-14 11:13 ` [PATCH v4 01/24] arm: initial Xen support Stefano Stabellini
2012-09-14 11:13 ` [PATCH v4 02/24] xen/arm: hypercalls Stefano Stabellini
2012-09-14 12:57 ` Konrad Rzeszutek Wilk
2012-09-14 13:45 ` Marc Zyngier [this message]
2012-09-14 14:02 ` Stefano Stabellini
2012-09-14 14:05 ` Marc Zyngier
2012-09-14 11:13 ` [PATCH v4 03/24] xen/arm: page.h definitions Stefano Stabellini
2012-09-14 11:13 ` [PATCH v4 04/24] xen/arm: sync_bitops Stefano Stabellini
2012-09-14 11:13 ` [PATCH v4 05/24] xen/arm: empty implementation of grant_table arch specific functions Stefano Stabellini
2012-09-14 11:13 ` [PATCH v4 06/24] docs: Xen ARM DT bindings Stefano Stabellini
2012-09-14 13:01 ` Konrad Rzeszutek Wilk
2012-09-14 14:26 ` Stefano Stabellini
2012-09-17 13:33 ` Rob Herring
2012-09-17 14:12 ` Stefano Stabellini
2012-09-18 14:50 ` Dave Martin
2012-09-14 11:13 ` [PATCH v4 07/24] xen/arm: Xen detection and shared_info page mapping Stefano Stabellini
2012-09-14 13:08 ` Konrad Rzeszutek Wilk
2012-09-14 14:44 ` Stefano Stabellini
2012-09-14 11:13 ` [PATCH v4 08/24] xen/arm: Introduce xen_pfn_t for pfn and mfn types Stefano Stabellini
2012-09-14 11:13 ` [PATCH v4 09/24] xen/arm: Introduce xen_ulong_t for unsigned long Stefano Stabellini
2012-09-14 13:04 ` Konrad Rzeszutek Wilk
2012-09-14 11:13 ` [PATCH v4 10/24] xen/arm: compile and run xenbus Stefano Stabellini
2012-09-14 13:03 ` Konrad Rzeszutek Wilk
2012-09-17 11:05 ` Stefano Stabellini
2012-09-17 13:56 ` Konrad Rzeszutek Wilk
2012-09-17 13:29 ` Konrad Rzeszutek Wilk
2012-09-17 13:45 ` Stefano Stabellini
2012-09-17 14:06 ` Konrad Rzeszutek Wilk
2012-09-14 11:13 ` [PATCH v4 11/24] xen: do not compile manage, balloon, pci, acpi, pcpu and cpu_hotplug on ARM Stefano Stabellini
2012-09-14 11:13 ` [PATCH v4 12/24] xen/arm: introduce CONFIG_XEN " Stefano Stabellini
2012-09-14 18:18 ` Sergei Shtylyov
2012-09-17 10:57 ` Stefano Stabellini
2012-09-17 12:07 ` Sergei Shtylyov
2012-09-17 14:02 ` Konrad Rzeszutek Wilk
2012-09-17 14:16 ` Stefano Stabellini
2012-09-17 14:05 ` Stefano Stabellini
2012-09-17 14:30 ` Stefano Stabellini
2012-09-14 11:13 ` [PATCH v4 13/24] xen/arm: get privilege status Stefano Stabellini
2012-09-14 11:13 ` [PATCH v4 14/24] xen/arm: initialize grant_table on ARM Stefano Stabellini
2012-09-14 13:10 ` Konrad Rzeszutek Wilk
2012-09-14 14:56 ` Stefano Stabellini
2012-09-14 15:08 ` Ian Campbell
2012-09-14 15:29 ` Stefano Stabellini
2012-09-14 15:34 ` Ian Campbell
2012-09-14 11:13 ` [PATCH v4 15/24] xen/arm: receive Xen events " Stefano Stabellini
2012-09-14 13:14 ` Konrad Rzeszutek Wilk
2012-09-14 11:13 ` [PATCH v4 16/24] xen: clear IRQ_NOAUTOEN and IRQ_NOREQUEST Stefano Stabellini
2012-09-14 14:02 ` Marc Zyngier
2012-09-14 14:13 ` Stefano Stabellini
2012-09-14 14:20 ` Marc Zyngier
2012-09-14 14:28 ` Stefano Stabellini
2012-09-14 14:31 ` Marc Zyngier
2012-09-14 11:13 ` [PATCH v4 17/24] xen/arm: implement alloc/free_xenballooned_pages with alloc_pages/kfree Stefano Stabellini
2012-09-14 11:13 ` [PATCH v4 18/24] xen: allow privcmd for HVM guests Stefano Stabellini
2012-09-14 11:13 ` [PATCH v4 19/24] xen/arm: compile blkfront and blkback Stefano Stabellini
2012-09-14 13:12 ` Konrad Rzeszutek Wilk
2012-09-14 11:13 ` [PATCH v4 20/24] xen/arm: compile netback Stefano Stabellini
2012-09-14 11:13 ` [PATCH v4 21/24] arm/v2m: initialize arch_timers even if v2m_timer is not present Stefano Stabellini
2012-09-14 12:27 ` Pawel Moll
2012-09-14 12:48 ` Stefano Stabellini
2012-09-14 13:03 ` Pawel Moll
2013-01-07 17:21 ` Stefano Stabellini
2013-01-07 17:32 ` Marc Zyngier
2013-01-07 19:21 ` Stefano Stabellini
2012-09-14 11:13 ` [PATCH v4 22/24] xen: missing includes Stefano Stabellini
2012-09-14 11:13 ` [PATCH v4 23/24] xen: update xen_add_to_physmap interface Stefano Stabellini
2012-09-14 13:13 ` Konrad Rzeszutek Wilk
2012-09-14 11:13 ` [PATCH v4 24/24] MAINTAINERS: add myself as Xen ARM maintainer Stefano Stabellini
2012-09-14 13:09 ` Konrad Rzeszutek Wilk
2012-09-14 13:21 ` [PATCH v4 00/24] Introduce Xen support on ARM (based on 3.6-rc5) Konrad Rzeszutek Wilk
2012-09-14 13:56 ` Stefano Stabellini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=50533500.2020606@arm.com \
--to=marc.zyngier@arm.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).