From: robherring2@gmail.com (Rob Herring)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH] arm: introduce a DTS for Xen unprivileged virtual machines
Date: Thu, 20 Sep 2012 15:26:19 -0500 [thread overview]
Message-ID: <505B7BEB.6010105@gmail.com> (raw)
In-Reply-To: <1348076658-4511-1-git-send-email-stefano.stabellini@eu.citrix.com>
On 09/19/2012 12:44 PM, Stefano Stabellini wrote:
> Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
> CC: Pawel Moll <pawel.moll@arm.com>
> CC: linux-arm-kernel at lists.infradead.org
> ---
> arch/arm/boot/dts/vexpress-xenvm-4.2.dts | 115 ++++++++++++++++++++++++++++++
> arch/arm/mach-vexpress/Makefile.boot | 3 +-
> 2 files changed, 117 insertions(+), 1 deletions(-)
> create mode 100644 arch/arm/boot/dts/vexpress-xenvm-4.2.dts
>
> diff --git a/arch/arm/boot/dts/vexpress-xenvm-4.2.dts b/arch/arm/boot/dts/vexpress-xenvm-4.2.dts
> new file mode 100644
> index 0000000..bfb802c
> --- /dev/null
> +++ b/arch/arm/boot/dts/vexpress-xenvm-4.2.dts
> @@ -0,0 +1,115 @@
> +/*
> + * Xen Virtual Machine for unprivileged guests
> + *
> + * Based on ARM Ltd. Versatile Express CoreTile Express (single CPU)
> + * Cortex-A15 MPCore (V2P-CA15)
> + *
> + */
> +
> +/dts-v1/;
> +
> +/include/ "skeleton.dtsi"
> +
> +/ {
> + model = "XENVM-4.2";
> + compatible = "xen,xenvm-4.2", "arm,vexpress";
> + interrupt-parent = <&gic>;
> +
> + chosen {
> + bootargs = "earlyprintk console=hvc0 root=/dev/xvda init=/sbin/init";
> + };
> +
> + cpus {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + cpu at 0 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a15";
> + reg = <0>;
> + };
> + };
> +
> + memory {
> + device_type = "memory";
> + reg = <0x80000000 0x08000000>;
How much guest memory can be supported here?
I would expect something like the memory size to be filled in by the
hypervisor. If so, perhaps a note on any fields hypervisor will adjust.
Rob
> + };
> +
> + gic: interrupt-controller at 2c001000 {
> + compatible = "arm,cortex-a9-gic";
> + #interrupt-cells = <3>;
> + #address-cells = <0>;
> + interrupt-controller;
> + reg = <0x2c001000 0x1000>,
> + <0x2c002000 0x100>;
> + };
> +
> + timer {
> + compatible = "arm,armv7-timer";
> + interrupts = <1 13 0xf08>,
> + <1 14 0xf08>,
> + <1 11 0xf08>,
> + <1 10 0xf08>;
> + };
> +
> + hypervisor {
> + compatible = "xen,xen-4.2", "xen,xen";
> + reg = <0xb0000000 0x20000>;
> + interrupts = <1 15 0xf08>;
> + };
> +
> + motherboard {
> + arm,v2m-memory-map = "rs1";
> + ranges = <0 0 0x08000000 0x04000000>,
> + <1 0 0x14000000 0x04000000>,
> + <2 0 0x18000000 0x04000000>,
> + <3 0 0x1c000000 0x04000000>,
> + <4 0 0x0c000000 0x04000000>,
> + <5 0 0x10000000 0x04000000>;
> +
> + interrupt-map-mask = <0 0 63>;
> + interrupt-map = <0 0 0 &gic 0 0 4>,
> + <0 0 1 &gic 0 1 4>,
> + <0 0 2 &gic 0 2 4>,
> + <0 0 3 &gic 0 3 4>,
> + <0 0 4 &gic 0 4 4>,
> + <0 0 5 &gic 0 5 4>,
> + <0 0 6 &gic 0 6 4>,
> + <0 0 7 &gic 0 7 4>,
> + <0 0 8 &gic 0 8 4>,
> + <0 0 9 &gic 0 9 4>,
> + <0 0 10 &gic 0 10 4>,
> + <0 0 11 &gic 0 11 4>,
> + <0 0 12 &gic 0 12 4>,
> + <0 0 13 &gic 0 13 4>,
> + <0 0 14 &gic 0 14 4>,
> + <0 0 15 &gic 0 15 4>,
> + <0 0 16 &gic 0 16 4>,
> + <0 0 17 &gic 0 17 4>,
> + <0 0 18 &gic 0 18 4>,
> + <0 0 19 &gic 0 19 4>,
> + <0 0 20 &gic 0 20 4>,
> + <0 0 21 &gic 0 21 4>,
> + <0 0 22 &gic 0 22 4>,
> + <0 0 23 &gic 0 23 4>,
> + <0 0 24 &gic 0 24 4>,
> + <0 0 25 &gic 0 25 4>,
> + <0 0 26 &gic 0 26 4>,
> + <0 0 27 &gic 0 27 4>,
> + <0 0 28 &gic 0 28 4>,
> + <0 0 29 &gic 0 29 4>,
> + <0 0 30 &gic 0 30 4>,
> + <0 0 31 &gic 0 31 4>,
> + <0 0 32 &gic 0 32 4>,
> + <0 0 33 &gic 0 33 4>,
> + <0 0 34 &gic 0 34 4>,
> + <0 0 35 &gic 0 35 4>,
> + <0 0 36 &gic 0 36 4>,
> + <0 0 37 &gic 0 37 4>,
> + <0 0 38 &gic 0 38 4>,
> + <0 0 39 &gic 0 39 4>,
> + <0 0 40 &gic 0 40 4>,
> + <0 0 41 &gic 0 41 4>,
> + <0 0 42 &gic 0 42 4>;
> + };
> +};
> diff --git a/arch/arm/mach-vexpress/Makefile.boot b/arch/arm/mach-vexpress/Makefile.boot
> index 318d308..5c633c5 100644
> --- a/arch/arm/mach-vexpress/Makefile.boot
> +++ b/arch/arm/mach-vexpress/Makefile.boot
> @@ -7,4 +7,5 @@ initrd_phys-y := 0x60800000
> dtb-$(CONFIG_ARCH_VEXPRESS_DT) += vexpress-v2p-ca5s.dtb \
> vexpress-v2p-ca9.dtb \
> vexpress-v2p-ca15-tc1.dtb \
> - vexpress-v2p-ca15_a7.dtb
> + vexpress-v2p-ca15_a7.dtb \
> + vexpress-xenvm-4.2.dtb
>
next prev parent reply other threads:[~2012-09-20 20:26 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-09-19 17:44 [PATCH] arm: introduce a DTS for Xen unprivileged virtual machines Stefano Stabellini
2012-09-20 10:06 ` Pawel Moll
2012-09-20 11:18 ` Dave Martin
2012-09-20 12:02 ` Stefano Stabellini
2012-09-20 21:29 ` Konrad Rzeszutek Wilk
2012-09-21 11:17 ` Stefano Stabellini
2012-09-20 11:39 ` Stefano Stabellini
2012-09-20 11:55 ` Pawel Moll
2012-09-20 12:15 ` Stefano Stabellini
2012-09-20 12:28 ` Marc Zyngier
2012-09-20 13:30 ` Ian Campbell
2012-09-20 13:50 ` Marc Zyngier
2012-09-20 10:17 ` Ian Campbell
2012-09-20 11:56 ` Stefano Stabellini
2012-09-20 12:18 ` Ian Campbell
2012-09-20 12:39 ` Stefano Stabellini
2012-09-20 13:16 ` Ian Campbell
2012-09-20 13:27 ` Arnd Bergmann
2012-09-20 14:11 ` Stefano Stabellini
2012-09-20 14:24 ` Pawel Moll
2012-09-20 10:45 ` [Xen-devel] " David Vrabel
2012-09-20 11:21 ` Dave Martin
2012-09-20 12:04 ` Stefano Stabellini
2012-09-20 12:57 ` Dave Martin
2012-09-20 12:00 ` Stefano Stabellini
2012-09-20 20:26 ` Rob Herring [this message]
2012-09-21 11:14 ` Stefano Stabellini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=505B7BEB.6010105@gmail.com \
--to=robherring2@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).