From mboxrd@z Thu Jan 1 00:00:00 1970 From: maxime.ripard@free-electrons.com (Maxime Ripard) Date: Fri, 21 Sep 2012 16:04:01 +0200 Subject: [PATCH 1/2] video: Add support for the Solomon SSD1307 OLED Controller In-Reply-To: <1348158800-23039-2-git-send-email-maxime.ripard@free-electrons.com> References: <1348158800-23039-1-git-send-email-maxime.ripard@free-electrons.com> <1348158800-23039-2-git-send-email-maxime.ripard@free-electrons.com> Message-ID: <505C73D1.7030800@free-electrons.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Hi Florian, Le 20/09/2012 18:33, Maxime Ripard a ?crit : > This patch adds support for the Solomon SSD1307 OLED > controller found on the Crystalfontz CFA10036 board. > > This controller can drive a display with a resolution up > to 128x39 and can operate over I2C or SPI. > > The current driver has only been tested on the CFA-10036, > that is using this controller over I2C to driver a 96x16 > OLED screen. > > Signed-off-by: Maxime Ripard > Cc: Brian Lilly Would you consider merging this patch or review it? It has been around for quite some time now and has not received any comments for at least the 2 last versions, so I guess there is not much left holding it back (unless, of course, if you have some comments to address), and I really would like to have it in 3.7. Thanks, Maxime -- Maxime Ripard, Free Electrons Kernel, drivers, real-time and embedded Linux development, consulting, training and support. http://free-electrons.com