From mboxrd@z Thu Jan  1 00:00:00 1970
From: zonque@gmail.com (Daniel Mack)
Date: Tue, 02 Oct 2012 18:50:14 +0200
Subject: [alsa-devel] [PATCH 2/3] ASoC: Davinci: pcm: add support for
 sram-support-less platforms
In-Reply-To: <20121002164116.GT5641@beef>
References: <1346417459-30042-1-git-send-email-gururaja.hebbar@ti.com>
 <1346417459-30042-3-git-send-email-gururaja.hebbar@ti.com>
 <20120922153313.GN4495@opensource.wolfsonmicro.com> <506A9C65.5040309@ti.com>
 <20121002093753.GU4360@opensource.wolfsonmicro.com>
 <506AC303.9080906@gmail.com> <506ACACE.4030308@ti.com>
 <506AEF57.2000306@gmail.com> <20121002164116.GT5641@beef>
Message-ID: <506B1B46.2070006@gmail.com>
To: linux-arm-kernel@lists.infradead.org
List-Id: linux-arm-kernel.lists.infradead.org

On 02.10.2012 18:41, Matt Porter wrote:
> On Tue, Oct 02, 2012 at 03:42:47PM +0200, Daniel Mack wrote:
>> On 02.10.2012 13:06, Sekhar Nori wrote:
>>> On 10/2/2012 4:03 PM, Daniel Mack wrote:
>>>> On 02.10.2012 11:37, Mark Brown wrote:
>>>>> On Tue, Oct 02, 2012 at 10:48:53AM +0300, Peter Ujfalusi wrote:
>>>>>
>>>>>> I also agree that ifdef is not a good solution.
>>>>>> It is better to have this information passed as device_data and via DT it can
>>>>>> be decided based on the compatible property for the device.
>>>>>
>>>>> That's not really the problem here - the problem is that the APIs used
>>>>> to get the SRAM are DaVinci only so it's not possible to build on OMAP
>>>>> or other platforms.  The SRAM code needs to move to a standard API.
>>>>
>>>> What about following Matt Porter's idea and ignore the SRAM code
>>>> entirely and port the entire PCM code to generic dmaengine code first?
>>>> The EDMA driver needs to learn support for cyclic DMA for that, and I
>>>> might give that a try in near future.
>>>>
>>>> Later on, the SRAM ping-pong code can get added back using genalloc
>>>> functions, as Sekhar proposed. That needs to be done by someone who has
>>>> access to a Davinci board though, I only have a AM33xx/OMAP here.
>>>
>>> We cannot "get rid" of SRAM code and add it back "later". It is required
>>> for most DaVinci parts. The SRAM code can be converted to use genalloc
>>> (conversion should be straightforward and I can help test it) and the
>>> code that uses SRAM can probably keep using the private EDMA API till
>>> the dmaengine EDMA driver has cyclic DMA support. Matt has already
>>> posted patches to move private EDMA APIs to a common location. That
>>> should keep AM335x build from breaking. Is this something that is feasible?
>>
>> Yes - by "later" I just meant in a subsequent patch. But you're probably
>> right, we can also do that first.
>>
>> I'm looking at that right now and the problem seems that we don't have a
>> sane way to dynamically look up gen_pools independently of the actual
>> run-time platform. All users of gen_pools seem to know which platform
>> they run on and access a platform-specific pool. So I don't currently
>> see how we could implement multi-platform code, gen_pools are fine but
>> don't solve the problem here.
>>
>> Would it be an idea to add a char* member to gen_pools and a function
>> that can be used to dynamically look it up again? If a buffer with a
>> certain name exists, we can use it and install that ping-pong buffer,
>> otherwise we just don't. While that would be easy to do, it's a
>> tree-wide change.
>>
>> Is there a better way that I miss?
> 
> At the high level there's two platform models we have to handle, the
> boot from board file !DT case, and then the boot from DT case. Since
> Davinci is just starting DT conversion, we mostly care about the !DT
> base in which the struct gen_pool * is passed in pdata to the ASoC
> driver. It is then selectable on a per-platform basis where the decision
> should be made.
> 
> Given a separate discussion with Sekhar, we're only going to have one
> SRAM pool on any DaVinci part right now...this was only a question on
> L138 anyway. But regardless, the created gen_pool will be passed via
> pdata.

I thought about this too, as mmp does it that way.

> Since DT conversion is starting and we need to consider that now,
> the idea there is to use the DT-based generic sram driver [1] such that
> when we do boot from DT on Davinci, the genpool is provided via phandle
> and the pointer extracted with the OF helpers that are part of the
> series.

A phandle is the cleanest way I think, yes.

> That's pretty much it. I'm reworking the backend support as discussed
> with Sekhar wrt to my uio_pruss series. I can post a standalone series
> that just replaces sram_* with genalloc for davinci ASoC.

As you can also test it, it would be easiest if you came up with a patch
for that, yes. I can have a look at the dma bits laters, once my OMAP
board finally works with the code as it currently stands. I'm still
fighting with the mcasp driver right now ...


Daniel