[PATCH] ARM: SAMSUNG: Add naming of s3c64xx-spi devices

[jose.goncalves@inov.pt (José Miguel Gonçalves)]

On 15-10-2012 15:58, Sylwester Nawrocki wrote:
> Hi Heiko,
>
> On 10/02/2012 02:43 PM, Heiko St?bner wrote:
>> Commit a5238e360b71 (spi: s3c64xx: move controller information into driver
>> data) introduced separate device names for the different subtypes of the
>> spi controller but forgot to set these in the relevant machines.
>>
>> To fix this introduce a s3c64xx_spi_setname function and populate all
>> Samsung arches with the correct names. The function resides in a new
>> header, as the s3c64xx-spi.h contains driver platform data and should
>> therefore at some later point move out of the Samsung include dir.
>>
>> Tested on a s3c2416-based machine.
>>
>> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
>> Cc: stable at vger.kernel.org
> This patch looks good to me. I've tested it on Exynos4412 SoC based
> board. And it fixes quite serious problem - broken SPI support on
> a all Samsung machs (non-dt) except s3c64xx in mainline v3.6 kernel.
>
>
> Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
> Tested-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
> (mach-exynos only)
>
> Jos? Miguel, can you confirm it solves the problem for you ?

The driver initialization problem is solved by this patch on my S3C2416 based 
board. Nevertheless, I didn?t have the time yet to test an actual SPI device 
connected to the bus.

BTW, I think the two debug messages at the end of the s3c64xx_spi_probe() routine 
should be promoted from dev_dbg to dev_info in order to be shown on a normal 
kernel boot.

Best regards,
Jos? Gon?alves