From: robherring2@gmail.com (Rob Herring)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 2/4] ARM: kirkwood: DT board setup for Network Space v2 and parents
Date: Mon, 15 Oct 2012 14:58:28 -0500 [thread overview]
Message-ID: <507C6AE4.1020406@gmail.com> (raw)
In-Reply-To: <1350315295-14567-3-git-send-email-simon.guinot@sequanux.org>
On 10/15/2012 10:34 AM, Simon Guinot wrote:
> This patch adds DT board setup for LaCie Network Space v2 and parents,
> based on the Marvell Kirkwood 6281 SoC. This includes Network Space v2
> (Max) and Internet Space v2.
>
> Signed-off-by: Simon Guinot <simon.guinot@sequanux.org>
> ---
> arch/arm/boot/dts/Makefile | 3 +
> arch/arm/boot/dts/kirkwood-is2.dts | 30 ++++++++++
> arch/arm/boot/dts/kirkwood-ns2-common.dtsi | 63 +++++++++++++++++++++
> arch/arm/boot/dts/kirkwood-ns2.dts | 30 ++++++++++
> arch/arm/boot/dts/kirkwood-ns2max.dts | 49 ++++++++++++++++
> arch/arm/mach-kirkwood/Kconfig | 21 +++++++
> arch/arm/mach-kirkwood/Makefile | 3 +
> arch/arm/mach-kirkwood/board-dt.c | 8 +++
> arch/arm/mach-kirkwood/board-ns2.c | 83 ++++++++++++++++++++++++++++
> arch/arm/mach-kirkwood/common.h | 8 +++
> drivers/leds/Kconfig | 4 +-
> 11 files changed, 301 insertions(+), 1 deletion(-)
> create mode 100644 arch/arm/boot/dts/kirkwood-is2.dts
> create mode 100644 arch/arm/boot/dts/kirkwood-ns2-common.dtsi
> create mode 100644 arch/arm/boot/dts/kirkwood-ns2.dts
> create mode 100644 arch/arm/boot/dts/kirkwood-ns2max.dts
> create mode 100644 arch/arm/mach-kirkwood/board-ns2.c
>
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index c1ce813..e6201b6 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -34,9 +34,12 @@ dtb-$(CONFIG_ARCH_KIRKWOOD) += kirkwood-dns320.dtb \
> kirkwood-ib62x0.dtb \
> kirkwood-iconnect.dtb \
> kirkwood-iomega_ix2_200.dtb \
> + kirkwood-is2.dtb \
> kirkwood-km_kirkwood.dtb \
> kirkwood-lschlv2.dtb \
> kirkwood-lsxhl.dtb \
> + kirkwood-ns2.dtb \
> + kirkwood-ns2max.dtb \
> kirkwood-ts219-6281.dtb \
> kirkwood-ts219-6282.dtb
> dtb-$(CONFIG_ARCH_MSM) += msm8660-surf.dtb \
> diff --git a/arch/arm/boot/dts/kirkwood-is2.dts b/arch/arm/boot/dts/kirkwood-is2.dts
> new file mode 100644
> index 0000000..7bc4677
> --- /dev/null
> +++ b/arch/arm/boot/dts/kirkwood-is2.dts
> @@ -0,0 +1,30 @@
> +/dts-v1/;
> +
> +/include/ "kirkwood-ns2-common.dtsi"
> +
> +/ {
> + model = "LaCie Internet Space v2";
> + compatible = "lacie,inetspace_v2", "marvell,kirkwood-88f6281", "marvell,kirkwood";
Compatible strings must be documented.
Rob
> +
> + memory {
> + device_type = "memory";
> + reg = <0x00000000 0x8000000>;
> + };
> +
> + ocp at f1000000 {
> + sata at 80000 {
> + status = "okay";
> + nr-ports = <1>;
> + };
> + };
> +
> + ns2-leds {
> + compatible = "ns2-leds";
> +
> + blue-sata {
> + label = "ns2:blue:sata";
> + slow-gpio = <&gpio0 29 0>;
> + cmd-gpio = <&gpio0 30 0>;
> + };
> + };
> +};
> diff --git a/arch/arm/boot/dts/kirkwood-ns2-common.dtsi b/arch/arm/boot/dts/kirkwood-ns2-common.dtsi
> new file mode 100644
> index 0000000..9bc6785
> --- /dev/null
> +++ b/arch/arm/boot/dts/kirkwood-ns2-common.dtsi
> @@ -0,0 +1,63 @@
> +/include/ "kirkwood.dtsi"
> +
> +/ {
> + chosen {
> + bootargs = "console=ttyS0,115200n8";
> + };
> +
> + ocp at f1000000 {
> + serial at 12000 {
> + clock-frequency = <166666667>;
> + status = "okay";
> + };
> +
> + spi at 10600 {
> + status = "okay";
> +
> + flash at 0 {
> + #address-cells = <1>;
> + #size-cells = <1>;
> + compatible = "mx25l4005a";
> + reg = <0>;
> + spi-max-frequency = <20000000>;
> + mode = <0>;
> +
> + partition at 0 {
> + reg = <0x0 0x80000>;
> + label = "u-boot";
> + };
> + };
> + };
> +
> + i2c at 11000 {
> + status = "okay";
> +
> + eeprom at 50 {
> + compatible = "at,24c04";
> + pagesize = <16>;
> + reg = <0x50>;
> + };
> + };
> + };
> +
> + gpio_keys {
> + compatible = "gpio-keys";
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + button at 1 {
> + label = "Power push button";
> + linux,code = <116>;
> + gpios = <&gpio1 0 0>;
> + };
> + };
> +
> + gpio-leds {
> + compatible = "gpio-leds";
> +
> + red-fail {
> + label = "ns2:red:fail";
> + gpios = <&gpio0 12 0>;
> + };
> + };
> +};
> diff --git a/arch/arm/boot/dts/kirkwood-ns2.dts b/arch/arm/boot/dts/kirkwood-ns2.dts
> new file mode 100644
> index 0000000..d018213
> --- /dev/null
> +++ b/arch/arm/boot/dts/kirkwood-ns2.dts
> @@ -0,0 +1,30 @@
> +/dts-v1/;
> +
> +/include/ "kirkwood-ns2-common.dtsi"
> +
> +/ {
> + model = "LaCie Network Space v2";
> + compatible = "lacie,netspace_v2", "marvell,kirkwood-88f6281", "marvell,kirkwood";
> +
> + memory {
> + device_type = "memory";
> + reg = <0x00000000 0x10000000>;
> + };
> +
> + ocp at f1000000 {
> + sata at 80000 {
> + status = "okay";
> + nr-ports = <1>;
> + };
> + };
> +
> + ns2-leds {
> + compatible = "ns2-leds";
> +
> + blue-sata {
> + label = "ns2:blue:sata";
> + slow-gpio = <&gpio0 29 0>;
> + cmd-gpio = <&gpio0 30 0>;
> + };
> + };
> +};
> diff --git a/arch/arm/boot/dts/kirkwood-ns2max.dts b/arch/arm/boot/dts/kirkwood-ns2max.dts
> new file mode 100644
> index 0000000..82156e2
> --- /dev/null
> +++ b/arch/arm/boot/dts/kirkwood-ns2max.dts
> @@ -0,0 +1,49 @@
> +/dts-v1/;
> +
> +/include/ "kirkwood-ns2-common.dtsi"
> +
> +/ {
> + model = "LaCie Network Space Max v2";
> + compatible = "lacie,netspace_max_v2", "marvell,kirkwood-88f6281", "marvell,kirkwood";
> +
> + memory {
> + device_type = "memory";
> + reg = <0x00000000 0x10000000>;
> + };
> +
> + ocp at f1000000 {
> + sata at 80000 {
> + status = "okay";
> + nr-ports = <2>;
> + };
> + };
> +
> + gpio_fan {
> + compatible = "gpio-fan";
> + gpios = <&gpio0 22 1
> + &gpio0 7 1
> + &gpio1 1 1
> + &gpio0 23 1>;
> + gpio-fan,speed-map =
> + < 0 0
> + 1500 15
> + 1700 14
> + 1800 13
> + 2100 12
> + 3100 11
> + 3300 10
> + 4300 9
> + 5500 8>;
> + alarm-gpios = <&gpio0 25 1>;
> + };
> +
> + ns2-leds {
> + compatible = "ns2-leds";
> +
> + blue-sata {
> + label = "ns2:blue:sata";
> + slow-gpio = <&gpio0 29 0>;
> + cmd-gpio = <&gpio0 30 0>;
> + };
> + };
> +};
> diff --git a/arch/arm/mach-kirkwood/Kconfig b/arch/arm/mach-kirkwood/Kconfig
> index 50bca50..847e0c2 100644
> --- a/arch/arm/mach-kirkwood/Kconfig
> +++ b/arch/arm/mach-kirkwood/Kconfig
> @@ -130,6 +130,27 @@ config MACH_KM_KIRKWOOD_DT
> Say 'Y' here if you want your kernel to support the
> Keymile Kirkwood Reference Desgin, using Flattened Device Tree.
>
> +config MACH_INETSPACE_V2_DT
> + bool "LaCie Internet Space v2 NAS (Flattened Device Tree)"
> + select ARCH_KIRKWOOD_DT
> + help
> + Say 'Y' here if you want your kernel to support the LaCie
> + Internet Space v2 NAS, using Flattened Device Tree.
> +
> +config MACH_NETSPACE_V2_DT
> + bool "LaCie Network Space v2 NAS (Flattened Device Tree)"
> + select ARCH_KIRKWOOD_DT
> + help
> + Say 'Y' here if you want your kernel to support the LaCie
> + Network Space v2 NAS, using Flattened Device Tree.
> +
> +config MACH_NETSPACE_MAX_V2_DT
> + bool "LaCie Network Space Max v2 NAS (Flattened Device Tree)"
> + select ARCH_KIRKWOOD_DT
> + help
> + Say 'Y' here if you want your kernel to support the LaCie
> + Network Space Max v2 NAS, using Flattened Device Tree.
> +
> config MACH_TS219
> bool "QNAP TS-110, TS-119, TS-119P+, TS-210, TS-219, TS-219P and TS-219P+ Turbo NAS"
> help
> diff --git a/arch/arm/mach-kirkwood/Makefile b/arch/arm/mach-kirkwood/Makefile
> index 294779f..1f63d80 100644
> --- a/arch/arm/mach-kirkwood/Makefile
> +++ b/arch/arm/mach-kirkwood/Makefile
> @@ -31,3 +31,6 @@ obj-$(CONFIG_MACH_GOFLEXNET_DT) += board-goflexnet.o
> obj-$(CONFIG_MACH_LSXL_DT) += board-lsxl.o
> obj-$(CONFIG_MACH_IOMEGA_IX2_200_DT) += board-iomega_ix2_200.o
> obj-$(CONFIG_MACH_KM_KIRKWOOD_DT) += board-km_kirkwood.o
> +obj-$(CONFIG_MACH_INETSPACE_V2_DT) += board-ns2.o
> +obj-$(CONFIG_MACH_NETSPACE_V2_DT) += board-ns2.o
> +obj-$(CONFIG_MACH_NETSPACE_MAX_V2_DT) += board-ns2.o
> diff --git a/arch/arm/mach-kirkwood/board-dt.c b/arch/arm/mach-kirkwood/board-dt.c
> index 70c5a28..b3e0519 100644
> --- a/arch/arm/mach-kirkwood/board-dt.c
> +++ b/arch/arm/mach-kirkwood/board-dt.c
> @@ -96,6 +96,11 @@ static void __init kirkwood_dt_init(void)
> if (of_machine_is_compatible("keymile,km_kirkwood"))
> km_kirkwood_init();
>
> + if (of_machine_is_compatible("lacie,inetspace_v2") ||
> + of_machine_is_compatible("lacie,netspace_v2") ||
> + of_machine_is_compatible("lacie,netspace_max_v2"))
> + ns2_init();
> +
> of_platform_populate(NULL, kirkwood_dt_match_table,
> kirkwood_auxdata_lookup, NULL);
> }
> @@ -112,6 +117,9 @@ static const char *kirkwood_dt_board_compat[] = {
> "buffalo,lsxl",
> "iom,ix2-200",
> "keymile,km_kirkwood",
> + "lacie,inetspace_v2",
> + "lacie,netspace_max_v2",
> + "lacie,netspace_v2",
> NULL
> };
>
> diff --git a/arch/arm/mach-kirkwood/board-ns2.c b/arch/arm/mach-kirkwood/board-ns2.c
> new file mode 100644
> index 0000000..b36c55c
> --- /dev/null
> +++ b/arch/arm/mach-kirkwood/board-ns2.c
> @@ -0,0 +1,83 @@
> +/*
> + * Copyright 2012 (C), Simon Guinot <simon.guinot@sequanux.org>
> + *
> + * arch/arm/mach-kirkwood/board-ns2.c
> + *
> + * LaCie Network Space v2 board (and parents) initialization for drivers
> + * not converted to flattened device tree yet.
> + *
> + * This file is licensed under the terms of the GNU General Public
> + * License version 2. This program is licensed "as is" without any
> + * warranty of any kind, whether express or implied.
> + */
> +
> +#include <linux/kernel.h>
> +#include <linux/init.h>
> +#include <linux/platform_device.h>
> +#include <linux/mv643xx_eth.h>
> +#include <linux/gpio.h>
> +#include "common.h"
> +#include "mpp.h"
> +
> +static struct mv643xx_eth_platform_data ns2_ge00_data = {
> + .phy_addr = MV643XX_ETH_PHY_ADDR(8),
> +};
> +
> +static unsigned int ns2_mpp_config[] __initdata = {
> + MPP0_SPI_SCn,
> + MPP1_SPI_MOSI,
> + MPP2_SPI_SCK,
> + MPP3_SPI_MISO,
> + MPP4_NF_IO6,
> + MPP5_NF_IO7,
> + MPP6_SYSRST_OUTn,
> + MPP7_GPO, /* Fan speed (bit 1) */
> + MPP8_TW0_SDA,
> + MPP9_TW0_SCK,
> + MPP10_UART0_TXD,
> + MPP11_UART0_RXD,
> + MPP12_GPO, /* Red led */
> + MPP14_GPIO, /* USB fuse */
> + MPP16_GPIO, /* SATA 0 power */
> + MPP17_GPIO, /* SATA 1 power */
> + MPP18_NF_IO0,
> + MPP19_NF_IO1,
> + MPP20_SATA1_ACTn,
> + MPP21_SATA0_ACTn,
> + MPP22_GPIO, /* Fan speed (bit 0) */
> + MPP23_GPIO, /* Fan power */
> + MPP24_GPIO, /* USB mode select */
> + MPP25_GPIO, /* Fan rotation fail */
> + MPP26_GPIO, /* USB device vbus */
> + MPP28_GPIO, /* USB enable host vbus */
> + MPP29_GPIO, /* Blue led (slow register) */
> + MPP30_GPIO, /* Blue led (command register) */
> + MPP31_GPIO, /* Board power off */
> + MPP32_GPIO, /* Power button (0 = Released, 1 = Pushed) */
> + MPP33_GPO, /* Fan speed (bit 2) */
> + 0
> +};
> +
> +#define NS2_GPIO_POWER_OFF 31
> +
> +static void ns2_power_off(void)
> +{
> + gpio_set_value(NS2_GPIO_POWER_OFF, 1);
> +}
> +
> +void __init ns2_init(void)
> +{
> + /*
> + * Basic setup. Needs to be called early.
> + */
> + kirkwood_mpp_conf(ns2_mpp_config);
> +
> + kirkwood_ehci_init();
> + kirkwood_ge00_init(&ns2_ge00_data);
> +
> + if (gpio_request(NS2_GPIO_POWER_OFF, "power-off") == 0 &&
> + gpio_direction_output(NS2_GPIO_POWER_OFF, 0) == 0)
> + pm_power_off = ns2_power_off;
> + else
> + pr_err("ns2: failed to configure power-off GPIO\n");
> +}
> diff --git a/arch/arm/mach-kirkwood/common.h b/arch/arm/mach-kirkwood/common.h
> index bcffd7c..2f75f3f 100644
> --- a/arch/arm/mach-kirkwood/common.h
> +++ b/arch/arm/mach-kirkwood/common.h
> @@ -112,6 +112,14 @@ void km_kirkwood_init(void);
> static inline void km_kirkwood_init(void) {};
> #endif
>
> +#if defined(CONFIG_MACH_INETSPACE_V2_DT) || \
> + defined(CONFIG_MACH_NETSPACE_V2_DT) || \
> + defined(CONFIG_MACH_NETSPACE_MAX_V2_DT)
> +void ns2_init(void);
> +#else
> +static inline void ns2_init(void) {};
> +#endif
> +
> /* early init functions not converted to fdt yet */
> char *kirkwood_id(void);
> void kirkwood_l2_init(void);
> diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
> index f508def..e455c08 100644
> --- a/drivers/leds/Kconfig
> +++ b/drivers/leds/Kconfig
> @@ -379,7 +379,9 @@ config LEDS_NS2
> tristate "LED support for Network Space v2 GPIO LEDs"
> depends on LEDS_CLASS
> depends on MACH_NETSPACE_V2 || MACH_INETSPACE_V2 || \
> - MACH_NETSPACE_MAX_V2 || MACH_D2NET_V2
> + MACH_NETSPACE_MAX_V2 || MACH_D2NET_V2 || \
> + MACH_NETSPACE_V2_DT || MACH_INETSPACE_V2_DT || \
> + MACH_NETSPACE_MAX_V2_DT
> default y
> help
> This option enable support for the dual-GPIO LED found on the
>
next prev parent reply other threads:[~2012-10-15 19:58 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-10-15 15:34 [PATCH 0/4] Add DT support for Network Space v2 and parents Simon Guinot
2012-10-15 15:34 ` [PATCH 1/4] leds: leds-ns2: add device tree binding Simon Guinot
2012-10-15 17:41 ` Jason Cooper
2012-10-15 19:12 ` Simon Guinot
2012-10-15 19:58 ` Jason Cooper
2012-10-16 9:39 ` Simon Guinot
2012-10-16 15:35 ` Jason Cooper
2012-10-16 13:02 ` Arnd Bergmann
2012-10-16 13:51 ` Simon Guinot
2012-10-16 18:56 ` Arnd Bergmann
2012-10-15 15:34 ` [PATCH 2/4] ARM: kirkwood: DT board setup for Network Space v2 and parents Simon Guinot
2012-10-15 19:36 ` Simon Guinot
2012-10-15 19:58 ` Rob Herring [this message]
2012-10-16 20:22 ` [PATCH] ARM: mach-kirkwood: add documentation for device tree bindings Simon Guinot
2012-10-16 20:41 ` [PATCH 2/4] ARM: kirkwood: DT board setup for Network Space v2 and parents Simon Guinot
2012-10-15 15:34 ` [PATCH 3/4] ARM: kirkwood: DT board setup for Network Space Lite v2 Simon Guinot
2012-10-15 15:34 ` [PATCH 4/4] ARM: kirkwood: DT board setup for Network Space Mini v2 Simon Guinot
2012-10-15 17:01 ` [PATCH 0/4] Add DT support for Network Space v2 and parents Jason Cooper
2012-10-15 18:50 ` Simon Guinot
2012-10-15 19:13 ` Jason Cooper
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=507C6AE4.1020406@gmail.com \
--to=robherring2@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).