From: Alexander Stein <alexander.stein@ew.tq-group.com>
To: Frank Li <Frank.Li@nxp.com>,
Sascha Hauer <s.hauer@pengutronix.de>,
Nora Schiffer <nora.schiffer@ew.tq-group.com>
Cc: Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Pengutronix Kernel Team <kernel@pengutronix.de>,
Fabio Estevam <festevam@gmail.com>,
linux-arm-kernel@lists.infradead.org, imx@lists.linux.dev,
linux@ew.tq-group.com, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org,
Nora Schiffer <nora.schiffer@ew.tq-group.com>
Subject: Re: [PATCH v2] arm64: dts: freescale: imx8mp-tqma8mpql-mba8mp-ras314: fix UART1 RTS/CTS muxing
Date: Mon, 02 Mar 2026 11:42:49 +0100 [thread overview]
Message-ID: <5083150.31r3eYUQgx@steina-w> (raw)
In-Reply-To: <20260302084548.6471-1-nora.schiffer@ew.tq-group.com>
Am Montag, 2. März 2026, 09:45:48 CET schrieb Nora Schiffer:
> UART1 operates in DCE mode, but the RTS/CTS pins were incorrectly
> configured using the DTE pinmux setting.
>
> Correct the pinmux to match DCE mode. Switching the RTS and CTS signals
> is fine for this board, as UART1 is routed to a pin header. Existing
> functionality is unaffected, as RTS/CTS could never have worked with
> the incorrect pinmux.
>
> Fixes: ddabb3ce3f90 ("arm64: dts: freescale: add TQMa8MPQL on MBa8MP-RAS314")
> Signed-off-by: Nora Schiffer <nora.schiffer@ew.tq-group.com>
Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com>
> ---
>
> v2: updated commit message based on suggestion by Frank Li
>
>
> .../boot/dts/freescale/imx8mp-tqma8mpql-mba8mp-ras314.dts | 4 ++--
> 1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mp-ras314.dts b/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mp-ras314.dts
> index b7f69c92b7748..1665a5030b993 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mp-ras314.dts
> +++ b/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mp-ras314.dts
> @@ -848,8 +848,8 @@ pinctrl_tlv320aic3x04: tlv320aic3x04grp {
> pinctrl_uart1: uart1grp {
> fsl,pins = <MX8MP_IOMUXC_SAI2_RXFS__UART1_DCE_TX 0x14>,
> <MX8MP_IOMUXC_SAI2_RXC__UART1_DCE_RX 0x14>,
> - <MX8MP_IOMUXC_SAI2_RXD0__UART1_DTE_CTS 0x14>,
> - <MX8MP_IOMUXC_SAI2_TXFS__UART1_DTE_RTS 0x14>;
> + <MX8MP_IOMUXC_SAI2_RXD0__UART1_DCE_RTS 0x14>,
> + <MX8MP_IOMUXC_SAI2_TXFS__UART1_DCE_CTS 0x14>;
> };
>
> pinctrl_uart1_gpio: uart1gpiogrp {
>
--
TQ-Systems GmbH | Mühlstraße 2, Gut Delling | 82229 Seefeld, Germany
Amtsgericht München, HRB 105018
Geschäftsführer: Detlef Schneider, Rüdiger Stahl, Stefan Schneider
http://www.tq-group.com/
next prev parent reply other threads:[~2026-03-02 10:43 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-03-02 8:45 [PATCH v2] arm64: dts: freescale: imx8mp-tqma8mpql-mba8mp-ras314: fix UART1 RTS/CTS muxing Nora Schiffer
2026-03-02 10:42 ` Alexander Stein [this message]
2026-03-09 18:55 ` Frank Li
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5083150.31r3eYUQgx@steina-w \
--to=alexander.stein@ew.tq-group.com \
--cc=Frank.Li@nxp.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=imx@lists.linux.dev \
--cc=kernel@pengutronix.de \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@ew.tq-group.com \
--cc=nora.schiffer@ew.tq-group.com \
--cc=robh@kernel.org \
--cc=s.hauer@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox