linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: jon-hunter@ti.com (Jon Hunter)
To: linux-arm-kernel@lists.infradead.org
Subject: OMAP baseline test results for v3.7-rc2
Date: Mon, 22 Oct 2012 11:28:52 -0500	[thread overview]
Message-ID: <50857444.9080308@ti.com> (raw)
In-Reply-To: <alpine.DEB.2.00.1210202125300.774@utopia.booyaka.com>

Hi Paul,

On 10/20/2012 04:26 PM, Paul Walmsley wrote:
> 
> Here are some basic OMAP test results for Linux v3.7-rc2.
> Logs and other details at:
> 
>     http://www.pwsan.com/omap/testlogs/test_v3.7-rc2/20121020134755/
> 
> 
> Passing tests
> -------------
> 
> Boot to userspace: 3517evm, 3530es3beagle, 3730beaglexm, 37xxevm,
>                    4430es2panda, 5912osk, am335xbone
> 
> PM ret/off, suspend + dynamic idle: (none)
> 
> 
> Failing tests: fixed by posted patches
> --------------------------------------
> 
> Boot tests:
> 
> * 2430sdp: vfp_reload_hw oops during MMC initialization
>   - Kernel attempts to save FP registers that don't exist; fix posted:
>     - http://www.spinics.net/lists/arm-kernel/msg200646.html
> 
> * 2420n800: boot hangs during UART initialization
>   - http://lkml.org/lkml/2012/9/11/454
>   - Apparently fixed by http://marc.info/?l=linux-omap&m=135068547918479&w=2
> 
> * AM335x Beaglebone: omap2plus_defconfig kernels don't boot
>   - due to a GPMC bug
>   - Apparently fixed by http://www.spinics.net/lists/arm-kernel/msg200787.html

This is now addressed and I have verified it is booting on v3.7-rc2. The
following patch address this boot problem ...

http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=8119024ef7363591fd958ec89ebfaee7c18209e3

> Other:
> 
> * 2420N800: powers down 30 seconds after boot
>   - Presumably due to missing CBUS patches for watchdog control
>   - http://lkml.org/lkml/2012/9/3/265
> 
> * 4430es2panda: omap_hwmod: mcpdm: cannot be enabled for reset (3)
>   - clock source is from an external I2C-controlled source
>   - must skip reset until the switchover to hwmod late init 
>   - http://www.spinics.net/lists/arm-kernel/msg178138.html
> 
> 
> Failing tests: needing investigation
> ------------------------------------
> 
> Boot tests:
> 
> * CM-T3517: L3 in-band error with IPSS during boot
>   - Cause unknown but see http://marc.info/?l=linux-omap&m=134833869730129&w=2
>   - Longstanding issue; does not occur on the 3517EVM
> 
> * 3517EVM & CM-T3517: boot hangs with NFS root
>   - Likely some Kconfig, board file, and PM issues with EMAC
> 
> * CM-T3517: boot hangs with MMC boot
>   - Due to missing MMC setup in board file
> 
> * 4460pandaes: boot fails early
>   - Appears to be timer-related

I tried v3.7-rc2 on my pandaES and it is booting fine for me.

I have an OMAP4460 ES1.1 and u-boot release 2012.10.

I don't wish to create more work for you, but it could be good to add
silicon revision, u-boot release (if applicable) and toolchain used for
any failures.

Cheers
Jon

  parent reply	other threads:[~2012-10-22 16:28 UTC|newest]

Thread overview: 23+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-10-20 21:26 OMAP baseline test results for v3.7-rc2 Paul Walmsley
2012-10-21 17:06 ` Paul Walmsley
2012-10-22 16:10 ` Jon Hunter
2012-10-22 17:17   ` Paul Walmsley
2012-10-22 17:18     ` Paul Walmsley
2012-10-22 16:28 ` Jon Hunter [this message]
2012-10-22 16:38   ` Tony Lindgren
2012-10-23 19:34     ` Paul Walmsley
2012-10-22 18:35   ` Paul Walmsley
2012-10-22 18:36     ` Paul Walmsley
2012-10-22 18:50       ` Jon Hunter
2012-10-22 18:48     ` Jon Hunter
2012-10-23  1:53       ` Matt Porter
2012-10-23  3:15         ` Paul Walmsley
2012-10-23  4:57           ` Paul Walmsley
2012-10-23 12:24           ` Matt Porter
2012-10-23 13:11             ` Matt Porter
2012-10-23 21:03               ` Kevin Hilman
2012-10-23 21:11                 ` Matt Porter
2012-10-25 14:14                   ` Kevin Hilman
2012-10-23  1:04 ` Kevin Hilman
2012-10-23 18:19   ` Kevin Hilman
2012-10-24  9:01     ` Igor Grinberg

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=50857444.9080308@ti.com \
    --to=jon-hunter@ti.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).