From mboxrd@z Thu Jan 1 00:00:00 1970 From: francescolavra.fl@gmail.com (Francesco Lavra) Date: Sat, 27 Oct 2012 17:08:36 +0200 Subject: [PATCH 2/4] mfd: ab8500: add devicetree support for btemp In-Reply-To: <1351146654-9110-3-git-send-email-rajanikanth.hv@stericsson.com> References: <1351146654-9110-1-git-send-email-rajanikanth.hv@stericsson.com> <1351146654-9110-3-git-send-email-rajanikanth.hv@stericsson.com> Message-ID: <508BF8F4.1060006@gmail.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On 10/25/2012 08:30 AM, Rajanikanth H.V wrote: > From: "Rajanikanth H.V" > > This patch adds device tree support for > battery-temperature-monitor driver > > Signed-off-by: Rajanikanth H.V > --- > Documentation/devicetree/bindings/mfd/ab8500.txt | 6 ++ > .../bindings/power_supply/ab8500/btemp.txt | 16 +++++ > arch/arm/boot/dts/dbx5x0.dtsi | 5 ++ > drivers/mfd/ab8500-core.c | 5 ++ > drivers/power/Kconfig | 6 -- > drivers/power/ab8500_bmdata.c | 4 +- > drivers/power/ab8500_btemp.c | 66 ++++++++++++-------- > 7 files changed, 73 insertions(+), 35 deletions(-) > create mode 100644 Documentation/devicetree/bindings/power_supply/ab8500/btemp.txt > > diff --git a/Documentation/devicetree/bindings/mfd/ab8500.txt b/Documentation/devicetree/bindings/mfd/ab8500.txt > index 6ca8d81..179c802 100644 > --- a/Documentation/devicetree/bindings/mfd/ab8500.txt > +++ b/Documentation/devicetree/bindings/mfd/ab8500.txt > @@ -30,6 +30,12 @@ ab8500-fg : : vddadc : Fuel Gauge > : LOW_BAT_F : : LOW threshold battery voltage > : CC_INT_CALIB : : Coulomb Counter Internal Calibration > : CCEOC : : Coulomb Counter End of Conversion > +ab8500-btemp : : vtvout : Battery Temperature > + : BAT_CTRL_INDB : : Battery Removal Indicator > + : BTEMP_LOW : : Btemp < BtempLow, if battery temperature is lower than -10?C > + : BTEMP_HIGH : : BtempLow < Btemp < BtempMedium,if battery temperature is between -10 and 0?C > + : BTEMP_LOW_MEDIUM : : BtempMedium < Btemp < BtempHigh,if battery temperature is between 0?C and?MaxTemp > + : BTEMP_MEDIUM_HIGH : : Btemp > BtempHigh, if battery temperature is higher than ?MaxTemp? BTEMP_HIGH, BTEMP_LOW_MEDIUM and BTEMP_MEDIUM_HIGH are in the wrong order and don't correspond to their description. -- Francesco