linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: nsekhar@ti.com (Sekhar Nori)
To: linux-arm-kernel@lists.infradead.org
Subject: [RFC PATCH v3 05/16] ARM: edma: add AM33XX crossbar event support
Date: Sun, 28 Oct 2012 16:41:24 +0530	[thread overview]
Message-ID: <508D12DC.8010400@ti.com> (raw)
In-Reply-To: <1350566815-409-6-git-send-email-mporter@ti.com>

On 10/18/2012 6:56 PM, Matt Porter wrote:
> Adds support for the per-EDMA channel event mux. This is required
> for any peripherals using DMA crossbar mapped events.
> 
> Signed-off-by: Matt Porter <mporter@ti.com>
> ---
>  arch/arm/common/edma.c             |   63 +++++++++++++++++++++++++++++++++++-
>  include/linux/platform_data/edma.h |    1 +
>  2 files changed, 63 insertions(+), 1 deletion(-)
> 
> diff --git a/arch/arm/common/edma.c b/arch/arm/common/edma.c
> index 6d2a590..b761b7a 100644
> --- a/arch/arm/common/edma.c
> +++ b/arch/arm/common/edma.c
> @@ -1425,6 +1425,53 @@ static int edma_of_read_u32_to_s16_array(const struct device_node *np,
>  	return 0;
>  }
>  
> +static int edma_xbar_event_map(struct device *dev,
> +			       struct device_node *node,
> +			       struct edma_soc_info *pdata, int len)
> +{
> +	int ret = 0;
> +	int i;
> +	struct resource res;
> +	void *xbar;
> +	s16 (*xbar_chans)[2];
> +	u32 shift, offset, mux;
> +
> +	xbar_chans = devm_kzalloc(dev,
> +				  len/sizeof(s16) + 2*sizeof(s16),
> +				  GFP_KERNEL);
> +	if (!xbar_chans)
> +		return -ENOMEM;
> +
> +	ret = of_address_to_resource(node, 1, &res);
> +	if (IS_ERR_VALUE(ret))
> +		return -EIO;
> +
> +	xbar = devm_ioremap(dev, res.start, resource_size(&res));
> +	if (!xbar)
> +		return -EIO;

-ENOMEM is more appropiate for ioremap failures.

> +
> +	ret = edma_of_read_u32_to_s16_array(node,
> +					    "ti,edma-xbar-event-map",
> +					    (s16 *)xbar_chans,
> +					    len/sizeof(u32));
> +	if (IS_ERR_VALUE(ret))
> +		return -EIO;
> +
> +	for (i = 0; xbar_chans[i][0] != -1; i++) {
> +		shift = (xbar_chans[i][1] % 4) * 8;
> +		offset = xbar_chans[i][1] >> 2;
> +		offset <<= 2;
> +		mux = __raw_readl((void *)((u32)xbar + offset));

Dont use __raw* variants of io accessors. There will be ordering issues
on ARMv7.

> +		mux &= (~(0xff << shift));
> +		mux |= (xbar_chans[i][0] << shift);

Unnecessary parens above.

> +		__raw_writel(mux, (void *)((u32)xbar + offset));
> +	}
> +
> +	pdata->xbar_chans = xbar_chans;
> +
> +	return 0;
> +}
> +
>  static int edma_of_parse_dt(struct device *dev,
>  			    struct device_node *node,
>  			    struct edma_soc_info *pdata)
> @@ -1453,7 +1500,6 @@ static int edma_of_parse_dt(struct device *dev,
>  	pdata->n_slot = value;
>  
>  	pdata->n_cc = 1;
> -	/* This is unused */

The comment should have not been part of 4/16?

Thanks,
Sekhar

  parent reply	other threads:[~2012-10-28 11:11 UTC|newest]

Thread overview: 51+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-10-18 13:26 [RFC PATCH v3 00/16] DMA Engine support for AM33XX Matt Porter
2012-10-18 13:26 ` [RFC PATCH v3 01/16] dmaengine: edma: fix slave config dependency on direction Matt Porter
2012-10-18 13:26 ` [RFC PATCH v3 02/16] ARM: davinci: move private EDMA API to arm/common Matt Porter
2012-10-28  8:17   ` Sekhar Nori
2012-11-16 16:49     ` Matt Porter
2013-01-10 23:51     ` Matt Porter
2013-01-22 15:40       ` Sekhar Nori
     [not found]       ` <d631bf39a8b8474bae448d089497fe0e@DLEE74.ent.ti.com>
2013-01-23 21:00         ` Matt Porter
2012-10-18 13:26 ` [RFC PATCH v3 03/16] ARM: edma: remove unused transfer controller handlers Matt Porter
2012-10-18 13:26 ` [RFC PATCH v3 04/16] ARM: edma: add DT and runtime PM support for AM33XX Matt Porter
2012-10-28 11:03   ` Sekhar Nori
2013-01-10 19:18     ` Matt Porter
2012-10-18 13:26 ` [RFC PATCH v3 05/16] ARM: edma: add AM33XX crossbar event support Matt Porter
2012-10-26 12:53   ` Hebbar, Gururaja
2012-10-28 11:11   ` Sekhar Nori [this message]
2013-01-10 22:54     ` Matt Porter
2012-10-18 13:26 ` [RFC PATCH v3 06/16] dmaengine: edma: enable build for AM33XX Matt Porter
2012-10-18 13:26 ` [RFC PATCH v3 07/16] dmaengine: edma: Add TI EDMA device tree binding Matt Porter
2012-10-18 13:26 ` [RFC PATCH v3 08/16] ARM: dts: add AM33XX EDMA support Matt Porter
2012-10-28 11:16   ` Sekhar Nori
2013-01-10 19:27     ` Matt Porter
2012-10-18 13:26 ` [RFC PATCH v3 09/16] dmaengine: add dma_request_slave_channel_compat() Matt Porter
2012-10-18 13:26 ` [RFC PATCH v3 10/16] mmc: omap_hsmmc: convert to dma_request_slave_channel_compat() Matt Porter
2012-10-18 13:26 ` [RFC PATCH v3 11/16] mmc: omap_hsmmc: limit max_segs with the EDMA DMAC Matt Porter
2012-10-29  8:18   ` Sekhar Nori
2013-01-10 19:30     ` Matt Porter
2012-10-18 13:26 ` [RFC PATCH v3 12/16] mmc: omap_hsmmc: add generic DMA request support to the DT binding Matt Porter
2012-10-18 13:26 ` [RFC PATCH v3 13/16] ARM: dts: add AM33XX MMC support Matt Porter
2012-10-30  5:33   ` AnilKumar, Chimata
2013-01-10 20:26     ` Matt Porter
2013-01-03 10:03   ` Hebbar, Gururaja
2012-10-18 13:26 ` [RFC PATCH v3 14/16] spi: omap2-mcspi: convert to dma_request_slave_channel_compat() Matt Porter
2012-10-18 13:26 ` [RFC PATCH v3 15/16] spi: omap2-mcspi: add generic DMA request support to the DT binding Matt Porter
2012-10-18 13:26 ` [RFC PATCH v3 16/16] ARM: dts: add AM33XX SPI support Matt Porter
2012-10-28 11:31   ` Sekhar Nori
2013-01-10 19:35     ` Matt Porter
2013-01-10 19:46       ` Nishanth Menon
2013-01-10 20:49         ` Matt Porter
2013-01-10 20:49           ` Nishanth Menon
2012-10-29  9:11   ` Philip, Avinash
2012-10-30  9:41   ` Philip, Avinash
2012-10-31 10:16     ` Benoit Cousson
2012-10-31 10:35       ` Benoit Cousson
2012-10-31 11:03         ` Philip, Avinash
2012-10-19 10:26 ` [RFC PATCH v3 00/16] DMA Engine support for AM33XX Bedia, Vaibhav
2012-10-19 11:15   ` Matt Porter
2012-10-19 12:02     ` Bedia, Vaibhav
2012-10-19 16:46       ` Matt Porter
2012-10-22  5:53         ` Bedia, Vaibhav
2012-10-26  8:32 ` Russ Dill
2012-11-05  7:19 ` Hebbar, Gururaja

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=508D12DC.8010400@ti.com \
    --to=nsekhar@ti.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).