[PATCH 4/4] OMAP: mtd: gpmc: add DT bindings for GPMC timings and NAND

[x0148406@ti.com (Afzal Mohammed)]

Hi Daniel,

On Monday 29 October 2012 04:45 PM, Daniel Mack wrote:
> On 29.10.2012 09:10, Afzal Mohammed wrote:

>> Also perhaps memory size (and offset if
>> needed) to be mapped for peripherals can go with reg
>> property of child.

> Which detail are you referring to here? The only "size" property that is
> effective is the one of the generic GPMC block, and there it's in the
> "reg"-property.

I was referring to that of child, now in gpmc_nand_init(),
gpmc_cs_request() is being done, later on if we want to
make it generic and remove gpmc_nand_init(), additional
information that would be required from DT at least is the
memory size to be reserved in gpmc address space for
the connected peripheral (assuming gpmc_cs_request()
would be done by gpmc driver generically later)

What I had in mind was example for external bus in [1],
but I had not looked deep into this aspect yet.

Regards
Afzal

[1] http://devicetree.org/Device_Tree_Usage#Memory_Mapped_Devices