From mboxrd@z Thu Jan 1 00:00:00 1970 From: swarren@wwwdotorg.org (Stephen Warren) Date: Mon, 29 Oct 2012 12:23:10 -0600 Subject: [PATCH V2 2/4] ARM: tegra: Add OF_DEV_AUXDATA for SLINK driver in board dt In-Reply-To: <1351531180-1652-3-git-send-email-ldewangan@nvidia.com> References: <1351531180-1652-1-git-send-email-ldewangan@nvidia.com> <1351531180-1652-3-git-send-email-ldewangan@nvidia.com> Message-ID: <508EC98E.902@wwwdotorg.org> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On 10/29/2012 11:19 AM, Laxman Dewangan wrote: > Add OF_DEV_AUXDATA for slink driver for Tegra20 and Tegra30 > board dt files. > Set the parent clock of slink controller to PLLP and configure > clock to 100MHz. > diff --git a/arch/arm/mach-tegra/board-dt-tegra20.c b/arch/arm/mach-tegra/board-dt-tegra20.c > @@ -90,6 +90,10 @@ struct of_dev_auxdata tegra20_auxdata_lookup[] __initdata = { > &tegra_ehci3_pdata), > OF_DEV_AUXDATA("nvidia,tegra20-apbdma", TEGRA_APB_DMA_BASE, "tegra-apbdma", NULL), > OF_DEV_AUXDATA("nvidia,tegra20-pwm", TEGRA_PWFM_BASE, "tegra-pwm", NULL), > + OF_DEV_AUXDATA("nvidia,tegra20-slink", TEGRA_SLINK1_BASE, "spi_tegra.0", NULL), > + OF_DEV_AUXDATA("nvidia,tegra20-slink", TEGRA_SLINK2_BASE, "spi_tegra.1", NULL), > + OF_DEV_AUXDATA("nvidia,tegra20-slink", TEGRA_SLINK3_BASE, "spi_tegra.2", NULL), > + OF_DEV_AUXDATA("nvidia,tegra20-slink", TEGRA_SLINK4_BASE, "spi_tegra.3", NULL), I would rather hard-code the addresses there (e.g. write literally 0x7000d400), and hence not have to edit iomap.h; > diff --git a/arch/arm/mach-tegra/include/mach/iomap.h b/arch/arm/mach-tegra/include/mach/iomap.h > -#define TEGRA_SPI1_BASE 0x7000D400 > -#define TEGRA_SPI1_SIZE SZ_512 > +#define TEGRA_SLINK1_BASE 0x7000D400 > +#define TEGRA_SLINK1_SIZE SZ_512 As I wrote for V1: Lets not add [or change] anything to iomap.h; we're trying to remove it. Instead, just put the raw address in the AUXDATA; I assume that's the only place these defines end up being used... Aside from that, this series looks fine.