[PATCH v3] ARM: dts: AM33xx: Add SPI node

[PATCH v3] ARM: dts: AM33xx: Add SPI node

[Philip, Avinash]

Add McSPI data node to AM33XX device tree file. The McSPI module (and so
as the driver) is reused from OMAP4.

Signed-off-by: Philip, Avinash <avinashphilip@ti.com>
Tested-by: Matt Porter <mporter@ti.com>
---
Changes since v2:
        - Commit message corrected.
	- Rebase on top of for_3.8/dts

Changes since v1:
        - Corrected reg offset in reg DT entry.

:100644 100644 97a7bd3... 6e04789... M	arch/arm/boot/dts/am33xx.dtsi
 arch/arm/boot/dts/am33xx.dtsi |   24 ++++++++++++++++++++++++
 1 files changed, 24 insertions(+), 0 deletions(-)

diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi
index 97a7bd3..6e04789 100644
--- a/arch/arm/boot/dts/am33xx.dtsi
+++ b/arch/arm/boot/dts/am33xx.dtsi
@@ -299,5 +299,29 @@
 				      76>;
 			ti,hwmods = "rtc";
 		};
+
+		spi0: spi at 48030000 {
+			compatible = "ti,omap4-mcspi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x48030000 0x400>;
+			interrupt-parent = <&intc>;
+			interrupt = <65>;
+			ti,spi-num-cs = <2>;
+			ti,hwmods = "spi0";
+			status = "disabled";
+		};
+
+		spi1: spi at 481a0000 {
+			compatible = "ti,omap4-mcspi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x481a0000 0x400>;
+			interrupt-parent = <&intc>;
+			interrupt = <125>;
+			ti,spi-num-cs = <2>;
+			ti,hwmods = "spi1";
+			status = "disabled";
+		};
 	};
 };
-- 
1.7.0.4

[PATCH v3] ARM: dts: AM33xx: Add SPI node

[Benoit Cousson]

On 10/31/2012 11:51 AM, Philip, Avinash wrote:
> Add McSPI data node to AM33XX device tree file. The McSPI module (and so
> as the driver) is reused from OMAP4.
> 
> Signed-off-by: Philip, Avinash <avinashphilip@ti.com>
> Tested-by: Matt Porter <mporter@ti.com>
> ---

Applied in for_3.8/dts

Thanks,
Benoit

> Changes since v2:
>         - Commit message corrected.
> 	- Rebase on top of for_3.8/dts
> 
> Changes since v1:
>         - Corrected reg offset in reg DT entry.
> 
> :100644 100644 97a7bd3... 6e04789... M	arch/arm/boot/dts/am33xx.dtsi
>  arch/arm/boot/dts/am33xx.dtsi |   24 ++++++++++++++++++++++++
>  1 files changed, 24 insertions(+), 0 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi
> index 97a7bd3..6e04789 100644
> --- a/arch/arm/boot/dts/am33xx.dtsi
> +++ b/arch/arm/boot/dts/am33xx.dtsi
> @@ -299,5 +299,29 @@
>  				      76>;
>  			ti,hwmods = "rtc";
>  		};
> +
> +		spi0: spi at 48030000 {
> +			compatible = "ti,omap4-mcspi";
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +			reg = <0x48030000 0x400>;
> +			interrupt-parent = <&intc>;
> +			interrupt = <65>;
> +			ti,spi-num-cs = <2>;
> +			ti,hwmods = "spi0";
> +			status = "disabled";
> +		};
> +
> +		spi1: spi at 481a0000 {
> +			compatible = "ti,omap4-mcspi";
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +			reg = <0x481a0000 0x400>;
> +			interrupt-parent = <&intc>;
> +			interrupt = <125>;
> +			ti,spi-num-cs = <2>;
> +			ti,hwmods = "spi1";
> +			status = "disabled";
> +		};
>  	};
>  };
> 

[PATCH v3] ARM: dts: AM33xx: Add SPI node

[Benoit Cousson]

Hi Avinash,

On 10/31/2012 11:51 AM, Philip, Avinash wrote:
> Add McSPI data node to AM33XX device tree file. The McSPI module (and so
> as the driver) is reused from OMAP4.
> 
> Signed-off-by: Philip, Avinash <avinashphilip@ti.com>
> Tested-by: Matt Porter <mporter@ti.com>

I've just realized the interrupt-parent was still there, so I removed both.

Please find below the updated version.

Regards,
Benoit

----
>From 9fd3c748aac9418cd377249ca463050783d2198f Mon Sep 17 00:00:00 2001
From: Philip, Avinash <avinashphilip@ti.com>
Date: Wed, 31 Oct 2012 16:21:09 +0530
Subject: [PATCH] ARM: dts: AM33XX: Add SPI node

Add McSPI data node to AM33XX device tree file. The McSPI module (and so
as the driver) is reused from OMAP4.

Signed-off-by: Philip, Avinash <avinashphilip@ti.com>
Tested-by: Matt Porter <mporter@ti.com>
[b-cousson at ti.com: Remove interrupt-parent]
Signed-off-by: Benoit Cousson <b-cousson@ti.com>
---
 arch/arm/boot/dts/am33xx.dtsi |   22 ++++++++++++++++++++++
 1 files changed, 22 insertions(+), 0 deletions(-)

diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi
index 97a7bd3..5dfd682 100644
--- a/arch/arm/boot/dts/am33xx.dtsi
+++ b/arch/arm/boot/dts/am33xx.dtsi
@@ -299,5 +299,27 @@
 				      76>;
 			ti,hwmods = "rtc";
 		};
+
+		spi0: spi at 48030000 {
+			compatible = "ti,omap4-mcspi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x48030000 0x400>;
+			interrupt = <65>;
+			ti,spi-num-cs = <2>;
+			ti,hwmods = "spi0";
+			status = "disabled";
+		};
+
+		spi1: spi at 481a0000 {
+			compatible = "ti,omap4-mcspi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x481a0000 0x400>;
+			interrupt = <125>;
+			ti,spi-num-cs = <2>;
+			ti,hwmods = "spi1";
+			status = "disabled";
+		};
 	};
 };
-- 
1.7.0.4

[PATCH v3] ARM: dts: AM33xx: Add SPI node

[Philip, Avinash]

On Thu, Nov 01, 2012 at 19:19:41, Cousson, Benoit wrote:
> Hi Avinash,
> 
> On 10/31/2012 11:51 AM, Philip, Avinash wrote:
> > Add McSPI data node to AM33XX device tree file. The McSPI module (and so
> > as the driver) is reused from OMAP4.
> > 
> > Signed-off-by: Philip, Avinash <avinashphilip@ti.com>
> > Tested-by: Matt Porter <mporter@ti.com>
> 
> I've just realized the interrupt-parent was still there, so I removed both.
> 
> Please find below the updated version.

I tested it and thanks for the fix.

Thanks
Avinash