[PATCH 02/15] ARM: OMAP2+: mailbox: Add support for AM33XX

[santosh.shilimkar@ti.com (Santosh Shilimkar)]

On Friday 02 November 2012 06:02 PM, Vaibhav Bedia wrote:
> Mailbox IP on AM33XX, is the same as that present
> in OMAP4. The single instance of Mailbox module
> contains 8 sub-modules and facilitates communication
> between MPU, PRUs and WKUP_M3.
>
> The first mailbox sub-module is assigned for
> communication between MPU and WKUP-M3.
>
> Signed-off-by: Vaibhav Bedia <vaibhav.bedia@ti.com>
> ---
>   arch/arm/mach-omap2/mailbox.c |   35 ++++++++++++++++++++++++++++++++++-
>   1 files changed, 34 insertions(+), 1 deletions(-)
>
> diff --git a/arch/arm/mach-omap2/mailbox.c b/arch/arm/mach-omap2/mailbox.c
> index f38b4fa..7a343aa 100644
> --- a/arch/arm/mach-omap2/mailbox.c
> +++ b/arch/arm/mach-omap2/mailbox.c
> @@ -155,7 +155,7 @@ static void omap2_mbox_disable_irq(struct omap_mbox *mbox,
>   	struct omap_mbox2_priv *p = mbox->priv;
>   	u32 bit = (irq == IRQ_TX) ? p->notfull_bit : p->newmsg_bit;
>
> -	if (!cpu_is_omap44xx())
> +	if (!cpu_is_omap44xx() || !soc_is_am33xx())
>   		bit = mbox_read_reg(p->irqdisable) & ~bit;
>
>   	mbox_write_reg(bit, p->irqdisable);
> @@ -358,6 +358,32 @@ struct omap_mbox mbox_2_info = {
>   struct omap_mbox *omap4_mboxes[] = { &mbox_1_info, &mbox_2_info, NULL };
>   #endif
>
> +#if defined(CONFIG_SOC_AM33XX)
> +static struct omap_mbox2_priv omap2_mbox_wkup_m3_priv = {
> +	.tx_fifo = {
> +		.msg		= MAILBOX_MESSAGE(0),
> +		.fifo_stat	= MAILBOX_FIFOSTATUS(0),
> +		.msg_stat	= MAILBOX_MSGSTATUS(0),
> +	},
> +	.rx_fifo = {
> +		.msg		= MAILBOX_MESSAGE(1),
> +		.msg_stat	= MAILBOX_MSGSTATUS(1),
> +	},
> +	.irqenable	= OMAP4_MAILBOX_IRQENABLE(3),
> +	.irqstatus	= OMAP4_MAILBOX_IRQSTATUS(3),
> +	.irqdisable	= OMAP4_MAILBOX_IRQENABLE_CLR(3),
> +	.notfull_bit	= MAILBOX_IRQ_NOTFULL(0),
> +	.newmsg_bit	= MAILBOX_IRQ_NEWMSG(0),
> +};
> +
> +struct omap_mbox mbox_wkup_m3_info = {
> +	.name	= "wkup_m3",
> +	.ops	= &omap2_mbox_ops,
> +	.priv	= &omap2_mbox_wkup_m3_priv,
> +};
> +struct omap_mbox *am33xx_mboxes[] = { &mbox_wkup_m3_info, NULL };
> +#endif
> +
>   static int __devinit omap2_mbox_probe(struct platform_device *pdev)
>   {
>   	struct resource *mem;
> @@ -392,6 +418,13 @@ static int __devinit omap2_mbox_probe(struct platform_device *pdev)
>   		list[0]->irq = list[1]->irq = platform_get_irq(pdev, 0);
>   	}
>   #endif
> +#if defined(CONFIG_SOC_AM33XX)
> +	else if (soc_is_am33xx()) {
> +		list = am33xx_mboxes;
> +
> +		list[0]->irq = platform_get_irq(pdev, 0);
> +	}
> +#endif
#ifdef in middle of the function looks really ugly. But I can't complain
just for your patch because looks like rest of the mailbox code is
flooded with #ifdeffery.

Mailbox needs cleanup. and probably can be moved out of
arch/arm/*omap*/ to some driver directory.

Regards
santosh


inside arch/arm/mach-omap2/* directory.