From mboxrd@z Thu Jan 1 00:00:00 1970 From: martin@ronetix.at (Martin Peevski) Date: Fri, 16 Nov 2012 09:25:51 +0200 Subject: Configure the USB device/host on sam9g25 module In-Reply-To: References: <50A51978.7040001@ronetix.at> Message-ID: <50A5EA7F.1010304@ronetix.at> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Hi, the evaluation kit sam9x5-ek is supplied with micro USB connector, I think it's impossible to connect mini USB on that? On 15/11/12 18:56, Zhong Li wrote: > It is a hardware configuration problem. You must use a type-A mini USB > cable. > > Martin Peevski wrote: > > Hi, > > I'm working with sam9g25 module placed on sam9x5-ek. sam9g25 has 2 > host USB's and 1 device/host USB (on the micro USB of sam9x5-ek). Both > USB hosts accept mass storage devices and works correct. It was > impossible to do 2 things with the USB device/host (placed on the micro > USB of sam9x5-ek): > > 1. Put in it mass storage device - the kernel want not to > enumerate it and give it an name (for example sda, sdb, ...). What I > must do in the config file of kernel to be recognized the inserted mass > storage device? > > 2. Connect cable from the micro USB to any of the host USB's and > detect USB serial gadget. > > I tryed to make some configs for both problems in the kernel but it > don't works. Can you, please, help me solve these problems? > > ------------------------------------------------------------------------ > > linux-arm-kernel mailing list > linux-arm-kernel at lists.infradead.org > http://lists.infradead.org/mailman/listinfo/linux-arm-kernel > > > > _______________________________________________ > linux-arm-kernel mailing list > linux-arm-kernel at lists.infradead.org > http://lists.infradead.org/mailman/listinfo/linux-arm-kernel -------------- next part -------------- An HTML attachment was scrubbed... URL: