From mboxrd@z Thu Jan  1 00:00:00 1970
From: maxime.ripard@free-electrons.com (Maxime Ripard)
Date: Mon, 19 Nov 2012 16:22:08 +0100
Subject: [PATCH 1/4] ARM: sunxi: Restructure sunxi dts/dtsi files
In-Reply-To: <1353323383-11827-1-git-send-email-sr@denx.de>
References: <1353323383-11827-1-git-send-email-sr@denx.de>
Message-ID: <50AA4EA0.7080309@free-electrons.com>
To: linux-arm-kernel@lists.infradead.org
List-Id: linux-arm-kernel.lists.infradead.org

Le 19/11/2012 12:09, Stefan Roese a ?crit :
> For the new sun4i/Cubieboard (A10) support, lets re-strucure the
> sun5i dts files to make it more generic. Those are the new
> dts/dtsi files:
> 
> sunxi.dtsi - Devices common to all Allwinner sunXi SoC's
> sun4i.dtsi - sun4i Devices, will include sunxi.dtsi
> sun5i.dtsi - sun5i Devices, will include sunxi.dtsi
> board.dts - will include either sun4i.dtsi or sun5i.dtsi
> 
> Additionally the "duart" label in the olinuxino.dts is changed to
> "uart1".
> 
> Signed-off-by: Stefan Roese <sr@denx.de>
> Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
> Cc: Arnd Bergmann <arnd@arndb.de>
> ---
>  arch/arm/boot/dts/sun5i-olinuxino.dts |  6 +++-
>  arch/arm/boot/dts/sun5i.dtsi          | 56 +----------------------------
>  arch/arm/boot/dts/sunxi.dtsi          | 66 +++++++++++++++++++++++++++++++++++
>  3 files changed, 72 insertions(+), 56 deletions(-)
>  create mode 100644 arch/arm/boot/dts/sunxi.dtsi
> 
> diff --git a/arch/arm/boot/dts/sun5i-olinuxino.dts b/arch/arm/boot/dts/sun5i-olinuxino.dts
> index 3b1cce3..d6ff889 100644
> --- a/arch/arm/boot/dts/sun5i-olinuxino.dts
> +++ b/arch/arm/boot/dts/sun5i-olinuxino.dts
> @@ -18,8 +18,12 @@
>  	model = "Olimex A13-Olinuxino";
>  	compatible = "olimex,a13-olinuxino", "allwinner,sun5i";
>  
> +	chosen {
> +		bootargs = "earlyprintk console=ttyS0,115200";
> +	};
> +
>  	soc {
> -		duart: uart at 01c28400 {
> +		uart1: uart at 01c28400 {
>  			status = "okay";
>  		};
>  	};
> diff --git a/arch/arm/boot/dts/sun5i.dtsi b/arch/arm/boot/dts/sun5i.dtsi
> index 4bedf3e..59a2d26 100644
> --- a/arch/arm/boot/dts/sun5i.dtsi
> +++ b/arch/arm/boot/dts/sun5i.dtsi
> @@ -11,64 +11,10 @@
>   * http://www.gnu.org/copyleft/gpl.html
>   */
>  
> -/include/ "skeleton.dtsi"
> +/include/ "sunxi.dtsi"
>  
>  / {
> -	interrupt-parent = <&intc>;
> -
> -	cpus {
> -		cpu at 0 {
> -			compatible = "arm,cortex-a8";
> -		};
> -	};
> -
> -	chosen {
> -		bootargs = "earlyprintk console=ttyS0,115200";
> -	};
> -
>  	memory {
>  		reg = <0x40000000 0x20000000>;
>  	};
> -
> -	clocks {
> -		#address-cells = <1>;
> -		#size-cells = <0>;
> -
> -		osc: oscillator {
> -			#clock-cells = <0>;
> -			compatible = "fixed-clock";
> -			clock-frequency = <24000000>;
> -		};
> -	};
> -
> -	soc {
> -		compatible = "simple-bus";
> -		#address-cells = <1>;
> -		#size-cells = <1>;
> -		reg = <0x01c20000 0x300000>;
> -		ranges;
> -
> -		timer at 01c20c00 {
> -			compatible = "allwinner,sunxi-timer";
> -			reg = <0x01c20c00 0x400>;
> -			interrupts = <22>;
> -			clocks = <&osc>;
> -		};
> -
> -		intc: interrupt-controller at 01c20400 {
> -			compatible = "allwinner,sunxi-ic";
> -			reg = <0x01c20400 0x400>;
> -			interrupt-controller;
> -			#interrupt-cells = <1>;
> -		};
> -
> -		uart1: uart at 01c28400 {
> -			compatible = "ns8250";
> -			reg = <0x01c28400 0x400>;
> -			interrupts = <2>;
> -			reg-shift = <2>;
> -			clock-frequency = <24000000>;
> -			status = "disabled";
> -		};
> -	};
>  };
> diff --git a/arch/arm/boot/dts/sunxi.dtsi b/arch/arm/boot/dts/sunxi.dtsi
> new file mode 100644
> index 0000000..9e476de
> --- /dev/null
> +++ b/arch/arm/boot/dts/sunxi.dtsi
> @@ -0,0 +1,66 @@
> +/*
> + * Copyright 2012 Maxime Ripard
> + *
> + * Maxime Ripard <maxime.ripard@free-electrons.com>
> + *
> + * The code contained herein is licensed under the GNU General Public
> + * License. You may obtain a copy of the GNU General Public License
> + * Version 2 or later at the following locations:
> + *
> + * http://www.opensource.org/licenses/gpl-license.html
> + * http://www.gnu.org/copyleft/gpl.html
> + */
> +
> +/include/ "skeleton.dtsi"
> +
> +/ {
> +	interrupt-parent = <&intc>;
> +
> +	cpus {
> +		cpu at 0 {
> +			compatible = "arm,cortex-a8";
> +		};
> +	};
> +
> +	clocks {
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +
> +		osc: oscillator {
> +			#clock-cells = <0>;
> +			compatible = "fixed-clock";
> +			clock-frequency = <24000000>;
> +		};
> +	};
> +
> +	soc {
> +		compatible = "simple-bus";
> +		#address-cells = <1>;
> +		#size-cells = <1>;
> +		reg = <0x01c20000 0x300000>;
> +		ranges;
> +
> +		timer at 01c20c00 {
> +			compatible = "allwinner,sunxi-timer";
> +			reg = <0x01c20c00 0x400>;
> +			interrupts = <22>;
> +			clocks = <&osc>;
> +		};
> +
> +		intc: interrupt-controller at 01c20400 {
> +			compatible = "allwinner,sunxi-ic";
> +			reg = <0x01c20400 0x400>;
> +			interrupt-controller;
> +			#interrupt-cells = <1>;
> +		};
> +
> +		uart1: uart at 01c28400 {
> +			compatible = "ns8250";
> +			reg = <0x01c28400 0x400>;
> +			interrupts = <2>;
> +			reg-shift = <2>;
> +			clock-frequency = <24000000>;
> +			status = "disabled";
> +		};
> +	};
> +};
> 

Applied, thanks!

-- 
Maxime Ripard, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com