From mboxrd@z Thu Jan 1 00:00:00 1970 From: mkl@pengutronix.de (Marc Kleine-Budde) Date: Wed, 21 Nov 2012 09:20:26 +0100 Subject: [PATCH 3/3] ARM: dts: AM33XX: Add memory resource to d_can node In-Reply-To: <1352916505-12343-4-git-send-email-anilkumar@ti.com> References: <1352916505-12343-1-git-send-email-anilkumar@ti.com> <1352916505-12343-4-git-send-email-anilkumar@ti.com> Message-ID: <50AC8ECA.1020906@pengutronix.de> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On 11/14/2012 07:08 PM, AnilKumar Ch wrote: > Add a new address space/memory resource to d_can device tree node. D_CAN > RAM initialization is achieved through RAMINIT register which is part of > AM33XX control module address space. D_CAN RAM init or de-init should be > done by writing instance corresponding value to control module register. > > Till we have a separate control module driver to write to control module, > d_can driver will handle the register writes to control module by itself. > So a new address space to represent this control module register is added > to d_can driver. > > Signed-off-by: AnilKumar Ch Acked-by: Marc Kleine-Budde -- Pengutronix e.K. | Marc Kleine-Budde | Industrial Linux Solutions | Phone: +49-231-2826-924 | Vertretung West/Dortmund | Fax: +49-5121-206917-5555 | Amtsgericht Hildesheim, HRA 2686 | http://www.pengutronix.de | -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 261 bytes Desc: OpenPGP digital signature URL: