From mboxrd@z Thu Jan 1 00:00:00 1970 From: mkl@pengutronix.de (Marc Kleine-Budde) Date: Wed, 21 Nov 2012 09:20:57 +0100 Subject: [PATCH 3/3] ARM: dts: AM33XX: Add memory resource to d_can node In-Reply-To: <331ABD5ECB02734CA317220B2BBEABC13EA778F3@DBDE01.ent.ti.com> References: <1352916505-12343-1-git-send-email-anilkumar@ti.com> <1352916505-12343-4-git-send-email-anilkumar@ti.com> <50AB57B0.7040502@pengutronix.de> <331ABD5ECB02734CA317220B2BBEABC13EA7701D@DBDE01.ent.ti.com> <50AB5AD8.7060407@pengutronix.de> <331ABD5ECB02734CA317220B2BBEABC13EA778F3@DBDE01.ent.ti.com> Message-ID: <50AC8EE9.7040508@pengutronix.de> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On 11/21/2012 06:45 AM, AnilKumar, Chimata wrote: > On Tue, Nov 20, 2012 at 15:56:32, Marc Kleine-Budde wrote: >> On 11/20/2012 11:23 AM, AnilKumar, Chimata wrote: >>> On Tue, Nov 20, 2012 at 15:43:04, Marc Kleine-Budde wrote: >>>> On 11/14/2012 07:08 PM, AnilKumar Ch wrote: >>>>> Add a new address space/memory resource to d_can device tree node. D_CAN >>>>> RAM initialization is achieved through RAMINIT register which is part of >>>>> AM33XX control module address space. D_CAN RAM init or de-init should be >>>>> done by writing instance corresponding value to control module register. >>>>> >>>>> Till we have a separate control module driver to write to control module, >>>>> d_can driver will handle the register writes to control module by itself. >>>>> So a new address space to represent this control module register is added >>>>> to d_can driver. >>>>> >>>>> Signed-off-by: AnilKumar Ch >>>> >>>> This does not apply to net-next/master: >>>> >>>> Applying: ARM: dts: AM33XX: Add memory resource to d_can node >>>> error: patch failed: arch/arm/boot/dts/am33xx.dtsi:227 >>>> error: arch/arm/boot/dts/am33xx.dtsi: patch does not apply >>>> Patch failed at 0003 ARM: dts: AM33XX: Add memory resource to d_can node >>>> >>> >>> Marc, >>> >>> Sorry about this DT changes are present in linux-omap. >>> >>> Could you please take the driver changes only and ACK on remaining will >>> help. >> >> Will do - I'm currently looking at the driver. >> > > Hi Marc, > > Please ACK this patch as well. done :) Marc -- Pengutronix e.K. | Marc Kleine-Budde | Industrial Linux Solutions | Phone: +49-231-2826-924 | Vertretung West/Dortmund | Fax: +49-5121-206917-5555 | Amtsgericht Hildesheim, HRA 2686 | http://www.pengutronix.de | -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 261 bytes Desc: OpenPGP digital signature URL: