[PATCH 0/3] ARM: OMAP3/4: Correct support for PWM LEDs/backlight

[peter.ujfalusi@ti.com (Peter Ujfalusi)]

Hi Tony,

On 01/03/2013 12:49 PM, Peter Ujfalusi wrote:
> Hi,
> 
> The pwm-leds driver update is going for 3.9:
> https://lkml.org/lkml/2012/12/21/99
> 
> This series will make sure that in 3.9 we are going to have working LEDs and
> backlight on these boards.
> 
> As a note: 4430SDP never had working backlight and the charger led did not
> worked for couple of releases already due to wrong pwm_id.
> 
> On BeagleBoard we will be able to adjust the brighness of pmu_stat LED instead
> of full on/off.
> 
> Zoom2 will have working keypad light and the backlight will be moved to be
> handled by the generic pwm-backlight driver.
> 
> This series will also fix a compile error in board-zoom-display.c caused by the
> changes in twl-core - which I missed :(
> 
> The DT support for these are going to be sent later.
> 
> Tony: can you apply this - if it looks OK - so it will hit linux-next before the
> second batch of twl-core update?

The series has been generated on top of my previous series for audio support
update of omap-twl4030:
http://www.mail-archive.com/linux-omap at vger.kernel.org/msg82615.html

I can regenerate this without the depending series if you prefer that way.

> 
> Regards,
> Peter
> ---
> Peter Ujfalusi (3):
>   ARM: OMAP: board-4430sdp: Proper support for TWL6030 PWM LED/Backlight
>   ARM: OMAP: omap3beagle: Use the pwm_leds driver to control the PMU_STAT led
>   ARM: OMAP: zoom: Use pwm stack for lcd and keyboard backlight
> 
>  arch/arm/mach-omap2/board-4430sdp.c          | 31 ++++++++++++++-
>  arch/arm/mach-omap2/board-omap3beagle.c      | 39 +++++++++++++++----
>  arch/arm/mach-omap2/board-zoom-display.c     | 56 ----------------------------
>  arch/arm/mach-omap2/board-zoom-peripherals.c | 53 +++++++++++++++++++++++++-
>  4 files changed, 113 insertions(+), 66 deletions(-)
> 


-- 
P?ter