From: sboyd@codeaurora.org (Stephen Boyd)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 1/2] clk: Add composite clock type
Date: Fri, 04 Jan 2013 14:18:32 -0800 [thread overview]
Message-ID: <50E75538.5010706@codeaurora.org> (raw)
In-Reply-To: <1357278706-28149-1-git-send-email-pgaikwad@nvidia.com>
On 01/03/13 21:51, Prashant Gaikwad wrote:
> diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
> index f0b269a..baf7608 100644
> --- a/drivers/clk/Makefile
> +++ b/drivers/clk/Makefile
> @@ -2,7 +2,8 @@
> obj-$(CONFIG_HAVE_CLK) += clk-devres.o
> obj-$(CONFIG_CLKDEV_LOOKUP) += clkdev.o
> obj-$(CONFIG_COMMON_CLK) += clk.o clk-fixed-rate.o clk-gate.o \
> - clk-mux.o clk-divider.o clk-fixed-factor.o
> + clk-mux.o clk-divider.o clk-fixed-factor.o \
> + clk-composite.o
This list is getting a little out of hand. Should we sort it
alphabetically and put each file on one line?
> # SoCs specific
> obj-$(CONFIG_ARCH_BCM2835) += clk-bcm2835.o
> obj-$(CONFIG_ARCH_NOMADIK) += clk-nomadik.o
> diff --git a/drivers/clk/clk-composite.c b/drivers/clk/clk-composite.c
> new file mode 100644
> index 0000000..8634dbf
> --- /dev/null
> +++ b/drivers/clk/clk-composite.c
> @@ -0,0 +1,208 @@
> +/*
> + * Copyright (c) 2012, NVIDIA CORPORATION. All rights reserved.
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms and conditions of the GNU General Public License,
> + * version 2, as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope it will be useful, but WITHOUT
> + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
> + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
> + * more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program. If not, see <http://www.gnu.org/licenses/>.
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/clk-provider.h>
> +#include <linux/err.h>
> +#include <linux/slab.h>
> +
> +#define to_clk_composite(_hw) container_of(_hw, struct clk_composite, hw)
> +
> +static u8 clk_composite_get_parent(struct clk_hw *hw)
> +{
> + struct clk_composite *composite = to_clk_composite(hw);
> + const struct clk_ops *mux_ops = composite->mux_ops;
> + struct clk_hw *mux_hw = composite->mux_hw;
> +
> + mux_hw->clk = hw->clk;
Looks like this is already done down in the register function. Why are
we doing it again here and in each op?
> +
> + return mux_ops->get_parent(mux_hw);
> +}
[snip]
> +struct clk *clk_register_composite(struct device *dev, const char *name,
> + const char **parent_names, int num_parents,
> + struct clk_hw *mux_hw, const struct clk_ops *mux_ops,
> + struct clk_hw *div_hw, const struct clk_ops *div_ops,
> + struct clk_hw *gate_hw, const struct clk_ops *gate_ops,
> + unsigned long flags)
> +{
> + struct clk *clk;
> + struct clk_init_data init;
> + struct clk_composite *composite;
> + struct clk_ops *clk_composite_ops;
> +
> + composite = kzalloc(sizeof(struct clk_ops), GFP_KERNEL);
sizeof(*composite) != sizeof(struct clk_ops)
> + if (!composite) {
> + pr_err("%s: could not allocate composite clk\n", __func__);
> + return ERR_PTR(-ENOMEM);
> + }
> +
> + init.name = name;
> + init.flags = flags | CLK_IS_BASIC;
> + init.parent_names = parent_names;
> + init.num_parents = num_parents;
> +
> + /* allocate the clock ops */
> + clk_composite_ops = kzalloc(sizeof(struct clk_ops), GFP_KERNEL);
This one looks right though. Perhaps you should change style to use
sizeof(*clk_composite_ops) so that the above mistake doesn't happen.
> + if (!clk_composite_ops) {
> + pr_err("%s: could not allocate clk ops\n", __func__);
> + kfree(composite);
> + return ERR_PTR(-ENOMEM);
> + }
> +
> + if (mux_hw && mux_ops) {
> + if (!mux_ops->get_parent || !mux_ops->set_parent) {
> + clk = ERR_PTR(-EINVAL);
> + goto err;
> + }
> +
> + composite->mux_hw = mux_hw;
> + composite->mux_ops = mux_ops;
> + clk_composite_ops->get_parent = clk_composite_get_parent;
> + clk_composite_ops->set_parent = clk_composite_set_parent;
> + }
> +
> + if (div_hw && div_ops) {
> + if (!div_ops->recalc_rate || !div_ops->round_rate ||
> + !div_ops->set_rate) {
> + clk = ERR_PTR(-EINVAL);
> + goto err;
> + }
> +
> + composite->div_hw = div_hw;
> + composite->div_ops = div_ops;
> + clk_composite_ops->recalc_rate = clk_composite_recalc_rate;
> + clk_composite_ops->round_rate = clk_composite_round_rate;
> + clk_composite_ops->set_rate = clk_composite_set_rate;
> + }
> +
> + if (gate_hw && gate_ops) {
> + if (!gate_ops->is_enabled || !gate_ops->enable ||
> + !gate_ops->disable) {
> + clk = ERR_PTR(-EINVAL);
> + goto err;
> + }
> +
> + composite->gate_hw = gate_hw;
> + composite->gate_ops = gate_ops;
> + clk_composite_ops->is_enabled = clk_composite_is_enabled;
> + clk_composite_ops->enable = clk_composite_enable;
> + clk_composite_ops->disable = clk_composite_disable;
> + }
> +
> + init.ops = clk_composite_ops;
> + composite->hw.init = &init;
> +
> + clk = clk_register(NULL, &composite->hw);
Please pass dev here.
> + if (IS_ERR(clk))
> + goto err;
> +
> + if (composite->mux_hw)
> + composite->mux_hw->clk = clk;
> +
> + if (composite->div_hw)
> + composite->div_hw->clk = clk;
> +
> + if (composite->gate_hw)
> + composite->gate_hw->clk = clk;
> +
> + return clk;
> +
> +err:
> + kfree(clk_composite_ops);
> + kfree(composite);
> + return clk;
> +}
>
--
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
hosted by The Linux Foundation
next prev parent reply other threads:[~2013-01-04 22:18 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-01-04 5:51 [PATCH 1/2] clk: Add composite clock type Prashant Gaikwad
2013-01-04 5:51 ` [PATCH 2/2] clk: tegra30: Convert clk out to composite clk Prashant Gaikwad
2013-01-04 16:25 ` Stephen Warren
2013-01-05 2:53 ` Prashant Gaikwad
2013-01-04 22:18 ` Stephen Boyd [this message]
2013-01-05 2:49 ` [PATCH 1/2] clk: Add composite clock type Prashant Gaikwad
2013-01-10 21:06 ` Stephen Boyd
2013-01-18 21:09 ` Mike Turquette
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=50E75538.5010706@codeaurora.org \
--to=sboyd@codeaurora.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).