From mboxrd@z Thu Jan  1 00:00:00 1970
From: grinberg@compulab.co.il (Igor Grinberg)
Date: Mon, 07 Jan 2013 11:42:03 +0200
Subject: [PATCH 3/4] ALSA: pxa27x: ac97 controller driver requests gpio
In-Reply-To: <50EA9710.3060107@compulab.co.il>
References: <1357499640-13871-1-git-send-email-mikedunn@newsguy.com>
 <1357499640-13871-4-git-send-email-mikedunn@newsguy.com>
 <50EA9710.3060107@compulab.co.il>
Message-ID: <50EA986B.70308@compulab.co.il>
To: linux-arm-kernel@lists.infradead.org
List-Id: linux-arm-kernel.lists.infradead.org

On 01/07/13 11:36, Igor Grinberg wrote:
> On 01/06/13 21:13, Mike Dunn wrote:
>> During initialization, the ac97 driver must obtain the gpio for the mfp that is
>> used by the ac97 controller as the AC97_nRESET line, or else gpiolib will issue
>> a warning and stack dump.  Gpiolib may change this to a hard error soon.  The
>> line is used during an ac97 warm reset for working around a hardware bug in the
>> controller.
>>
>> Tested on a palm treo 680 machine.
>>
>> Signed-off-by: Mike Dunn <mikedunn@newsguy.com>
>> ---
>>  sound/arm/pxa2xx-ac97-lib.c |   10 +++++++++-
>>  1 files changed, 9 insertions(+), 1 deletions(-)
>>
>> diff --git a/sound/arm/pxa2xx-ac97-lib.c b/sound/arm/pxa2xx-ac97-lib.c
>> index 1ecd0a66..416d2e3 100644
>> --- a/sound/arm/pxa2xx-ac97-lib.c
>> +++ b/sound/arm/pxa2xx-ac97-lib.c
>> @@ -18,6 +18,7 @@
>>  #include <linux/delay.h>
>>  #include <linux/module.h>
>>  #include <linux/io.h>
>> +#include <linux/gpio.h>
>>  
>>  #include <sound/ac97_codec.h>
>>  #include <sound/pxa2xx-lib.h>
>> @@ -344,7 +345,12 @@ int pxa2xx_ac97_hw_probe(struct platform_device *dev)
>>  	}
>>  
>>  	if (cpu_is_pxa27x()) {
>> -		/* Use GPIO 113 as AC97 Reset on Bulverde */
>> +		ret = gpio_request(reset_gpio, "pxa27x ac97 reset");
>> +		if (ret < 0) {
>> +			pr_err("%s: gpio_request() failed: %d\n",
>> +			       __func__, ret);
>> +			goto err_conf;
>> +		}
> 
> I think if we are fine with the request in the driver,
> then we should move the direction and value configuration also
> to the driver, but let the pxa27x_assert_ac97reset() only switch
> the AF.

Also this patch should be combined with 2/4.

> 
>>  		pxa27x_assert_ac97reset(reset_gpio, 0);
>>  		ac97conf_clk = clk_get(&dev->dev, "AC97CONFCLK");
>>  		if (IS_ERR(ac97conf_clk)) {
>> @@ -388,6 +394,8 @@ EXPORT_SYMBOL_GPL(pxa2xx_ac97_hw_probe);
>>  
>>  void pxa2xx_ac97_hw_remove(struct platform_device *dev)
>>  {
>> +	if (cpu_is_pxa27x())
>> +		gpio_free(reset_gpio);
>>  	GCR |= GCR_ACLINK_OFF;
>>  	free_irq(IRQ_AC97, NULL);
>>  	if (ac97conf_clk) {
> 

-- 
Regards,
Igor.