public inbox for linux-arm-kernel@lists.infradead.org
 help / color / mirror / Atom feed
From: maxime.ripard@free-electrons.com (Maxime Ripard)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH V2 1/3] gpio: pca953x: make the register access by GPIO bank
Date: Tue, 08 Jan 2013 09:32:54 +0100	[thread overview]
Message-ID: <50EBD9B6.3090601@free-electrons.com> (raw)
In-Reply-To: <1357599097-19053-2-git-send-email-gregory.clement@free-electrons.com>

Hi Gregory,

On 07/01/2013 23:51, Gregory CLEMENT wrote:
> -static int pca953x_write_reg(struct pca953x_chip *chip, int reg, u32 val)
> +static int pca953x_read_single(struct pca953x_chip *chip, int reg, u32 *val,
> +				int off)
> +{
> +	int ret;
> +	int bank_shift = fls((chip->gpio_chip.ngpio - 1) / BANK_SZ);
> +	int offset = off / BANK_SZ;
> +
> +	ret = i2c_smbus_read_byte_data(chip->client,
> +				(reg << bank_shift) + offset);
> +	*val = ret;
> +
> +	if (ret < 0) {
> +		dev_err(&chip->client->dev, "failed reading register\n", reg);

This triggers a warning, since you have an argument but nothing corresponding to it in your format string.

>  static irqreturn_t pca953x_irq_handler(int irq, void *devid)
>  {
>  	struct pca953x_chip *chip = devid;
> -	u32 pending;
> -	u32 level;
> +	u8 pending[MAX_BANK];
> +	u8 level;
> +	int i;
>  
> -	pending = pca953x_irq_pending(chip);
> -
> -	if (!pending)
> +	if (!pca953x_irq_pending(chip, pending))
>  		return IRQ_HANDLED;
>  
> -	do {
> -		level = __ffs(pending);
> -		handle_nested_irq(irq_find_mapping(chip->domain, level));
> -
> -		pending &= ~(1 << level);
> -	} while (pending);
> +	for (i = 0; i < NBANK(chip); i++) {
> +		do {
> +			level = __ffs(pending[i]);
> +			handle_nested_irq(irq_find_mapping(chip->domain,
> +							level + (BANK_SZ * i)));
> +			pending[i] &= ~(1 << level);
> +		} while (pending[i]);
> +	}
>  
>  	return IRQ_HANDLED;
>  }

This triggers the following warning when an interrupt is raised:

[   30.773500] ------------[ cut here ]------------
[   30.778843] WARNING: at /home/tmp/linux/kernel/irq/irqdomain.c:137 irq_domain_legacy_revmap+0x2c/0x48()
[   30.788375] Modules linked in:
[   30.791531] [<c0014100>] (unwind_backtrace+0x0/0xf0) from [<c001c878>] (warn_slowpath_common+0x4c/0x64)
[   30.801125] [<c001c878>] (warn_slowpath_common+0x4c/0x64) from [<c001c8ac>] (warn_slowpath_null+0x1c/0x24)
[   30.810968] [<c001c8ac>] (warn_slowpath_null+0x1c/0x24) from [<c006b5e0>] (irq_domain_legacy_revmap+0x2c/0x48)
[   30.821187] [<c006b5e0>] (irq_domain_legacy_revmap+0x2c/0x48) from [<c01c3734>] (pca953x_irq_handler+0x16c/0x1ac)
[   30.831656] [<c01c3734>] (pca953x_irq_handler+0x16c/0x1ac) from [<c0068688>] (irq_thread+0xd0/0x124)
[   30.841000] [<c0068688>] (irq_thread+0xd0/0x124) from [<c003c238>] (kthread+0xa4/0xb0)
[   30.849125] [<c003c238>] (kthread+0xa4/0xb0) from [<c000ed48>] (ret_from_fork+0x14/0x2c)
[   30.857375] ---[ end trace 09584b7a73100a49 ]---

Maxime

-- 
Maxime Ripard, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com

  reply	other threads:[~2013-01-08  8:32 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-01-07 22:51 [PATCH V2 0/3] Add support for gpio expander pca9505 used on Mirabox Gregory CLEMENT
2013-01-07 22:51 ` [PATCH V2 1/3] gpio: pca953x: make the register access by GPIO bank Gregory CLEMENT
2013-01-08  8:32   ` Maxime Ripard [this message]
2013-01-08  8:58     ` Gregory CLEMENT
2013-01-08  9:00       ` Maxime Ripard
2013-01-21 23:30       ` Gregory CLEMENT
2013-01-07 22:51 ` [PATCH V2 2/3] gpio: pca953x: add support for pca9505 Gregory CLEMENT
2013-01-07 22:51 ` [PATCH V2 3/3] arm: mvebu: enable gpio expander over i2c on Mirabox platform Gregory CLEMENT

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=50EBD9B6.3090601@free-electrons.com \
    --to=maxime.ripard@free-electrons.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox