From mboxrd@z Thu Jan  1 00:00:00 1970
From: sshtylyov@mvista.com (Sergei Shtylyov)
Date: Tue, 15 Jan 2013 16:53:30 +0400
Subject: [RFC PATCH 2/7] ARM: OMAP: devices: create device for usb part
 of control module
In-Reply-To: <1358239378-10030-3-git-send-email-kishon@ti.com>
References: <1358239378-10030-1-git-send-email-kishon@ti.com>
 <1358239378-10030-3-git-send-email-kishon@ti.com>
Message-ID: <50F5514A.2040207@mvista.com>
To: linux-arm-kernel@lists.infradead.org
List-Id: linux-arm-kernel.lists.infradead.org

Hello.

On 15-01-2013 12:42, Kishon Vijay Abraham I wrote:

> A seperate driver has been added to handle the usb part of control
> module. A device for the above driver is created here, using the register
> address information to be used by the driver for powering on the PHY and
> for writing to the mailbox.

> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
> ---
>   arch/arm/mach-omap2/devices.c |   50 +++++++++++++++++++++++++++++++++++++++++
>   1 file changed, 50 insertions(+)

> diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c
> index 5e304d0..a761faf4 100644
> --- a/arch/arm/mach-omap2/devices.c
> +++ b/arch/arm/mach-omap2/devices.c
[...]
> @@ -254,6 +255,54 @@ static inline void omap_init_camera(void)
>   #endif
>   }
>
> +#if (defined(CONFIG_OMAP_CONTROL_USB) || \
> +				defined(CONFIG_OMAP_CONTROL_USB_MODULE))

    () around || not needed, and you're indenting the second line too much.

> +static inline void __init omap_init_control_usb(void)
> +{
> +	int ret = 0;

    Initializer not needed.

> +
> +	if (cpu_is_omap44xx()) {
> +		ret = platform_device_register(&omap4_control_usb);
> +		if (ret)
> +			pr_err("Error registering omap_control_usb device: %d\n"
> +			    , ret);

    Please leave the comma on the previous line.

WBR, Sergei