[PATCH 5/5] ARM: dts: OMAP5: Specify nonsecure PPI IRQ for arch timer

[marc.zyngier@arm.com (Marc Zyngier)]

On 18/01/13 17:00, Santosh Shilimkar wrote:
> On Friday 18 January 2013 09:32 PM, Marc Zyngier wrote:
>> On 18/01/13 15:32, Santosh Shilimkar wrote:
>>> From: Rajendra Nayak <rnayak@ti.com>
>>>
>>> Specify both secure as well as nonsecure PPI IRQ for arch
>>> timer. This fixes the following errors seen on DT OMAP5 boot..
>>>
>>> [    0.000000] arch_timer: No interrupt available, giving up
>>>
>>> Cc: Benoit Cousson <b-cousson@ti.com>
>>>
>>> Signed-off-by: Rajendra Nayak <rnayak@ti.com>
>>> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
>>> ---
>>>   arch/arm/boot/dts/omap5.dtsi |   16 ++++++++++++----
>>>   1 file changed, 12 insertions(+), 4 deletions(-)
>>>
>>> diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi
>>> index 790bb2a..7a78d1b 100644
>>> --- a/arch/arm/boot/dts/omap5.dtsi
>>> +++ b/arch/arm/boot/dts/omap5.dtsi
>>> @@ -35,8 +35,12 @@
>>>   			compatible = "arm,cortex-a15";
>>>   			timer {
>>>   				compatible = "arm,armv7-timer";
>>> -				/* 14th PPI IRQ, active low level-sensitive */
>>> -				interrupts = <1 14 0x308>;
>>> +				/*
>>> +				 * PPI secure/nonsecure IRQ,
>>> +				 * active low level-sensitive
>>> +				 */
>>> +				interrupts = <1 13 0x308>,
>>> +					     <1 14 0x308>;
>>
>> Care to add the virtual and HYP timer interrupts? So KVM can get a
>> chance to run on this HW...
>>
> Thanks Marc for spotting it. Will take care of it.

I just realised something silly... You have one timer node *per cpu*,
and this is not really expected.

The driver really wants one single node. See
arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts for an example.

Oh, and your GIC node could do with some updating too (no VGIC regs or
interrupt).

	M.
-- 
Jazz is not dead. It just smells funny...