From: santosh.shilimkar@ti.com (Santosh Shilimkar)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v4] ARM: LPAE: Fix mapping in alloc_init_pte for unaligned addresses
Date: Fri, 1 Feb 2013 11:51:29 +0530 [thread overview]
Message-ID: <510B5EE9.40502@ti.com> (raw)
In-Reply-To: <1359472036-7613-1-git-send-email-r.sricharan@ti.com>
Catalin, Russell,
On Tuesday 29 January 2013 08:37 PM, R Sricharan wrote:
> With LPAE enabled, alloc_init_section() does not map the
> entire address space for unaligned addresses.
>
> The issue also reproduced with CMA + LPAE. CMA tries to map 16MB
> with page granularity mappings during boot. alloc_init_pte()
> is called and out of 16MB, only 2MB gets mapped and rest remains
> unaccessible.
>
> Because of this OMAP5 boot is broken with CMA + LPAE enabled.
> Fix the issue by ensuring that the entire addresses are
> mapped.
>
> Signed-off-by: R Sricharan <r.sricharan@ti.com>
> Cc: Catalin Marinas <catalin.marinas@arm.com>
> Cc: Christoffer Dall <chris@cloudcar.com>
> Cc: Russell King <linux@arm.linux.org.uk>
> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
> Tested-by: Christoffer Dall <chris@cloudcar.com>
> ---
This patch has been on the list for quite some time. Its
a bug fix and should into mainline. Christoffer already
stumbled on the same issue and has to spend debugging the
known issue.
Can you please give your ack's if it is fine to get into
patch system ?
> [V2] Moved the loop to alloc_init_pte as per Russell's
> feedback and changed the subject accordingly.
> Using PMD_XXX instead of SECTION_XXX to avoid
> different loop increments with/without LPAE.
>
> [v3] Removed the dummy variable phys and updated
> the commit log for CMA case.
>
> [v4] Resending with updated change log and
> updating the tags.
>
> arch/arm/mm/mmu.c | 20 ++++++++++++++++----
> 1 file changed, 16 insertions(+), 4 deletions(-)
>
> diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c
> index f8388ad..b94c313 100644
> --- a/arch/arm/mm/mmu.c
> +++ b/arch/arm/mm/mmu.c
> @@ -569,11 +569,23 @@ static void __init alloc_init_pte(pmd_t *pmd, unsigned long addr,
> unsigned long end, unsigned long pfn,
> const struct mem_type *type)
> {
> - pte_t *pte = early_pte_alloc(pmd, addr, type->prot_l1);
> + unsigned long next;
> + pte_t *pte;
> +
> do {
> - set_pte_ext(pte, pfn_pte(pfn, __pgprot(type->prot_pte)), 0);
> - pfn++;
> - } while (pte++, addr += PAGE_SIZE, addr != end);
> + if ((end-addr) & PMD_MASK)
> + next = (addr + PMD_SIZE) & PMD_MASK;
> + else
> + next = end;
> +
> + pte = early_pte_alloc(pmd, addr, type->prot_l1);
> + do {
> + set_pte_ext(pte, pfn_pte(pfn,
> + __pgprot(type->prot_pte)), 0);
> + pfn++;
> + } while (pte++, addr += PAGE_SIZE, addr != next);
> +
> + } while (pmd++, addr = next, addr != end);
> }
>
> static void __init alloc_init_section(pud_t *pud, unsigned long addr,
>
next prev parent reply other threads:[~2013-02-01 6:21 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-01-29 15:07 [PATCH v4] ARM: LPAE: Fix mapping in alloc_init_pte for unaligned addresses R Sricharan
2013-02-01 6:21 ` Santosh Shilimkar [this message]
2013-02-01 16:26 ` Catalin Marinas
2013-02-01 16:32 ` Christoffer Dall
2013-02-01 16:37 ` Catalin Marinas
2013-02-01 16:40 ` Christoffer Dall
2013-02-01 17:42 ` Catalin Marinas
2013-02-01 18:37 ` Christoffer Dall
2013-02-04 4:40 ` R Sricharan
2013-02-04 4:44 ` R Sricharan
2013-02-04 11:10 ` R Sricharan
2013-02-06 12:15 ` Catalin Marinas
2013-02-06 12:22 ` Russell King - ARM Linux
2013-02-06 12:33 ` Catalin Marinas
2013-02-06 13:59 ` R Sricharan
2013-02-06 13:56 ` R Sricharan
2013-02-06 15:16 ` Catalin Marinas
2013-02-06 15:25 ` R Sricharan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=510B5EE9.40502@ti.com \
--to=santosh.shilimkar@ti.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).