From: kishon@ti.com (kishon)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 04/13] mfd: omap-usb-tll: Add device tree support
Date: Tue, 5 Feb 2013 11:34:15 +0530 [thread overview]
Message-ID: <5110A0DF.7050609@ti.com> (raw)
In-Reply-To: <1359993540-20780-5-git-send-email-rogerq@ti.com>
On Monday 04 February 2013 09:28 PM, Roger Quadros wrote:
> Enable this driver to probe in device tree boot.
>
> CC: Samuel Ortiz <sameo@linux.intel.com>
> Signed-off-by: Roger Quadros <rogerq@ti.com>
> ---
> .../devicetree/bindings/mfd/omap-usb-tll.txt | 17 +++++++++++++++++
> drivers/mfd/omap-usb-tll.c | 9 +++++++++
> 2 files changed, 26 insertions(+), 0 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/mfd/omap-usb-tll.txt
>
> diff --git a/Documentation/devicetree/bindings/mfd/omap-usb-tll.txt b/Documentation/devicetree/bindings/mfd/omap-usb-tll.txt
> new file mode 100644
> index 0000000..835cf4f
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mfd/omap-usb-tll.txt
> @@ -0,0 +1,17 @@
> +OMAP HS USB Host TLL (Transceiver-Less Interface)
> +
> +Required properties:
> +
> +- compatible : should be "ti,usbhs-tll"
> +- reg : should contain one register range i.e. start and length
> +- interrupts : should contain the TLL module's interrupt
> +- ti,hwmod : must contain "usb_tll_hs"
> +
> +Example:
> +
> + usbhstll: usbhstll at 0x4a062000 {
The node name shouldn't have 0x. This comment applies to all your
patches adding device tree support.
Thanks
Kishon
next prev parent reply other threads:[~2013-02-05 6:04 UTC|newest]
Thread overview: 64+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-02-04 15:58 [PATCH 00/13] Device tree support for OMAP HS USB Host Roger Quadros
2013-02-04 15:58 ` [PATCH 01/13] usb: phy: nop: Add device tree support and binding information Roger Quadros
2013-02-05 7:26 ` Felipe Balbi
2013-02-05 8:30 ` Roger Quadros
2013-02-05 9:07 ` Felipe Balbi
2013-03-11 15:52 ` Marc Kleine-Budde
2013-03-12 9:09 ` Roger Quadros
2013-03-08 10:46 ` Marc Kleine-Budde
2013-03-08 15:04 ` Roger Quadros
2013-03-08 15:45 ` Marc Kleine-Budde
2013-03-11 8:40 ` Roger Quadros
2013-03-11 15:53 ` Marc Kleine-Budde
2013-02-04 15:58 ` [PATCH 02/13] USB: phy: nop: Defer probe if device needs VCC/RESET Roger Quadros
2013-02-05 5:54 ` kishon
2013-02-05 8:44 ` Roger Quadros
2013-02-05 9:09 ` Felipe Balbi
2013-02-05 9:43 ` Roger Quadros
2013-03-11 15:58 ` Marc Kleine-Budde
2013-03-12 9:10 ` Roger Quadros
2013-02-04 15:58 ` [PATCH 03/13] mfd: omap-usb-tll: move configuration code to omap_tll_init() Roger Quadros
2013-02-04 15:58 ` [PATCH 04/13] mfd: omap-usb-tll: Add device tree support Roger Quadros
2013-02-05 6:04 ` kishon [this message]
2013-02-05 8:46 ` Roger Quadros
2013-02-04 15:58 ` [PATCH 05/13] USB: ehci-omap: Get platform resources by index rather than by name Roger Quadros
2013-02-04 21:12 ` Alan Stern
2013-02-04 15:58 ` [PATCH 06/13] USB: ohci-omap3: " Roger Quadros
2013-02-04 21:12 ` Alan Stern
2013-02-04 15:58 ` [PATCH 07/13] USB: ohci-omap3: Add device tree support and binding information Roger Quadros
2013-02-04 21:14 ` Alan Stern
2013-02-04 15:58 ` [PATCH 08/13] USB: ehci-omap: " Roger Quadros
2013-02-04 21:15 ` Alan Stern
2013-02-05 12:33 ` Mark Rutland
2013-02-05 12:46 ` Roger Quadros
2013-02-04 15:58 ` [PATCH 09/13] mfd: omap-usb-host: " Roger Quadros
2013-02-05 6:16 ` kishon
2013-02-05 8:50 ` Roger Quadros
2013-02-05 10:58 ` Roger Quadros
2013-02-05 12:11 ` kishon
2013-02-05 12:27 ` Roger Quadros
2013-02-05 14:20 ` Mark Rutland
2013-02-05 14:42 ` Roger Quadros
2013-02-05 16:11 ` Mark Rutland
2013-02-06 8:56 ` Roger Quadros
2013-02-04 15:58 ` [PATCH 10/13] ARM: dts: OMAP4: Add HS USB Host IP nodes Roger Quadros
2013-02-05 6:24 ` kishon
2013-02-05 8:54 ` Roger Quadros
2013-02-05 8:57 ` kishon
2013-02-05 7:41 ` Felipe Balbi
2013-02-05 8:57 ` Roger Quadros
2013-02-04 15:58 ` [PATCH 11/13] ARM: dts: omap4-panda: Add USB Host support Roger Quadros
[not found] ` <5110D229.1000808@ti.com>
2013-02-05 11:15 ` how to specify an OMAP clock in device tree? Rajendra Nayak
2013-02-05 13:46 ` Roger Quadros
2013-02-05 14:13 ` Rajendra Nayak
2013-02-05 14:18 ` Roger Quadros
2013-02-05 14:21 ` Rajendra Nayak
2013-02-05 14:29 ` Roger Quadros
2013-02-05 14:36 ` Rajendra Nayak
2013-02-05 14:52 ` Roger Quadros
2013-02-06 10:21 ` Rajendra Nayak
2013-02-06 10:39 ` Roger Quadros
2013-02-04 15:58 ` [PATCH 12/13] ARM: dts: OMAP3: Add HS USB Host IP nodes Roger Quadros
2013-02-04 15:59 ` [PATCH 13/13] ARM: dts: omap3-beagle: Add USB Host support Roger Quadros
2013-02-05 11:25 ` [PATCH 00/13] Device tree support for OMAP HS USB Host Rajendra Nayak
2013-02-05 11:32 ` Roger Quadros
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5110A0DF.7050609@ti.com \
--to=kishon@ti.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).