From mboxrd@z Thu Jan 1 00:00:00 1970 From: kishon@ti.com (kishon) Date: Tue, 5 Feb 2013 11:34:15 +0530 Subject: [PATCH 04/13] mfd: omap-usb-tll: Add device tree support In-Reply-To: <1359993540-20780-5-git-send-email-rogerq@ti.com> References: <1359993540-20780-1-git-send-email-rogerq@ti.com> <1359993540-20780-5-git-send-email-rogerq@ti.com> Message-ID: <5110A0DF.7050609@ti.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On Monday 04 February 2013 09:28 PM, Roger Quadros wrote: > Enable this driver to probe in device tree boot. > > CC: Samuel Ortiz > Signed-off-by: Roger Quadros > --- > .../devicetree/bindings/mfd/omap-usb-tll.txt | 17 +++++++++++++++++ > drivers/mfd/omap-usb-tll.c | 9 +++++++++ > 2 files changed, 26 insertions(+), 0 deletions(-) > create mode 100644 Documentation/devicetree/bindings/mfd/omap-usb-tll.txt > > diff --git a/Documentation/devicetree/bindings/mfd/omap-usb-tll.txt b/Documentation/devicetree/bindings/mfd/omap-usb-tll.txt > new file mode 100644 > index 0000000..835cf4f > --- /dev/null > +++ b/Documentation/devicetree/bindings/mfd/omap-usb-tll.txt > @@ -0,0 +1,17 @@ > +OMAP HS USB Host TLL (Transceiver-Less Interface) > + > +Required properties: > + > +- compatible : should be "ti,usbhs-tll" > +- reg : should contain one register range i.e. start and length > +- interrupts : should contain the TLL module's interrupt > +- ti,hwmod : must contain "usb_tll_hs" > + > +Example: > + > + usbhstll: usbhstll at 0x4a062000 { The node name shouldn't have 0x. This comment applies to all your patches adding device tree support. Thanks Kishon