From: Heiko Stuebner <heiko@sntech.de>
To: arm@kernel.org
Cc: linux-rockchip@lists.infradead.org, soc@kernel.org,
linux-arm-kernel@lists.infradead.org
Subject: [GIT PULL 2/2] Rockchip dt64 for 5.6
Date: Thu, 09 Jan 2020 22:40:34 +0100 [thread overview]
Message-ID: <5115625.yBEeHQkg2z@phil> (raw)
In-Reply-To: <8215452.dU6eVM2tAM@phil>
The following changes since commit e42617b825f8073569da76dc4510bfa019b1c35a:
Linux 5.5-rc1 (2019-12-08 14:57:55 -0800)
are available in the Git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip.git tags/v5.6-rockchip-dts64-1
for you to fetch changes up to 1fc61ed04d309b0b8b3562acf701ab988eee12de:
arm64: dts: rockchip: Enable mp8859 regulator on rk3399-roc-pc (2020-01-09 00:28:40 +0100)
----------------------------------------------------------------
New boards are the Radxa Rock Pi N10 using the VMARC SOM and Dalang
carrier board, separate versions for the two rockpro64 hardware revisions
which switched a pin between revisions. The rockpro64 also got
bluetooth support now.
The px30 got a lot of attention with dsi, gpu and thermal support.
Similarly the rk3399-roc-pc board also got attention with mtd flash,
sdr104 mode, hdmi sound, gpu and a lot of other smaller improvements.
Other than that there is a new gpu-cooling device for rk3399 a cpu
idle-state for rk3328 and more small improvements across a number
of boards.
----------------------------------------------------------------
Anand Moon (1):
arm64: dts: rockchip: Add regulators for pcie on rk3399-rock960
Heiko Stuebner (7):
arm64: dts: rockchip: remove 408MHz operating point from px30
arm64: dts: rockchip: add thermal infrastructure to px30
arm64: dts: rockchip: enable tsadc on px30-evb
dt-bindings: gpu: mali-bifrost: Add Rockchip PX30
arm64: dts: rockchip: add the gpu for px30
arm64: dts: rockchip: enable the gpu on px30-evb
arm64: dts: rockchip: add dsi controller for px30
Jagan Teki (4):
dt-bindings: arm: rockchip: Add Rock Pi N10 binding
arm64: dts: rockchip: Add VMARC RK3399Pro SOM initial support
ARM: dts: rockchip: Add Radxa Dalang Carrier board
arm64: dts: rockchip: Add Radxa Rock Pi N10 initial support
Johan Jonker (3):
arm64: dts: rockchip: remove identical &uart0 node from rk3368-lion-haikou
arm64: dts: rockchip: rk3399-firefly: remove num-slots from &sdio0 node
arm64: dts: rockchip: rk3399-hugsun-x99: remove supports-sd and supports-emmc options
Katsuhiro Suzuki (1):
arm64: dts: rockchip: split rk3399-rockpro64 for v2 and v2.1 boards
Kever Yang (1):
arm64: dts: rockchip: Fix min voltage for rk3399-firefly vdd_log
Markus Reichl (10):
arm64: dts: rockchip: Add node for gpu on rk3399-roc-pc
arm64: dts: rockchip: Add regulators for pcie on rk3399-roc-pc
arm64: dts: rockchip: Enable HDMI Sound on rk3399-roc-pc
arm64: dts: rockchip: Disable HS400 for mmc on rk3399-roc-pc
arm64: dts: rockchip: Fix vdd_log on rk3399-roc-pc
arm64: dts: rockchip: Use correct pin for lcd-reset pinctrl on rk3399-roc-pc
arm64: dts: rockchip: Add SDR104 mode to SD-card I/F on rk3399-roc-pc
arm64: dts: rockchip: Enable MTD Flash on rk3399-roc-pc
arm64: dts: rockchip: Remove always-on properties from regulator nodes on rk3399-roc-pc.
arm64: dts: rockchip: Enable mp8859 regulator on rk3399-roc-pc
Matwey V. Kornilov (2):
arm64: dts: rockchip: Enable PCIe for Radxa Rock Pi 4 board
arm64: dts: rockchip: Add regulators for PCIe for Radxa Rock Pi 4 board
Miquel Raynal (2):
arm64: dts: rockchip: Add PX30 DSI DPHY
arm64: dts: rockchip: Add PX30 LVDS
Robin Murphy (4):
arm64: dts: rockchip: Fix NanoPC-T4 cooling maps
arm64: dts: rockchip: Improve nanopi4 PCIe
arm64: dts: rockchip: Add GPU cooling device for RK3399
arm64: dts: rockchip: Add RK3328 idle state
Soeren Moch (2):
arm64: dts: rockchip: enable wifi module at sdio0 on rockpro64
arm64: dts: rockchip: hook up bluetooth at uart0 on rockpro64
.../devicetree/bindings/arm/rockchip.yaml | 9 +
.../devicetree/bindings/gpu/arm,mali-bifrost.yaml | 1 +
.../boot/dts/rockchip-radxa-dalang-carrier.dtsi | 81 +++
arch/arm64/boot/dts/rockchip/Makefile | 2 +
arch/arm64/boot/dts/rockchip/px30-evb.dts | 11 +
arch/arm64/boot/dts/rockchip/px30.dtsi | 187 ++++-
arch/arm64/boot/dts/rockchip/rk3328.dtsi | 17 +
.../arm64/boot/dts/rockchip/rk3368-lion-haikou.dts | 6 -
arch/arm64/boot/dts/rockchip/rk3399-firefly.dts | 3 +-
arch/arm64/boot/dts/rockchip/rk3399-hugsun-x99.dts | 2 -
arch/arm64/boot/dts/rockchip/rk3399-nanopc-t4.dts | 28 +-
arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi | 27 +-
.../boot/dts/rockchip/rk3399-roc-pc-mezzanine.dts | 4 +-
arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi | 97 ++-
arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dts | 26 +
arch/arm64/boot/dts/rockchip/rk3399-rock960.dtsi | 11 +
.../boot/dts/rockchip/rk3399-rockpro64-v2.dts | 30 +
arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dts | 759 +-------------------
arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi | 797 +++++++++++++++++++++
arch/arm64/boot/dts/rockchip/rk3399.dtsi | 9 +
.../boot/dts/rockchip/rk3399pro-rock-pi-n10.dts | 17 +
.../boot/dts/rockchip/rk3399pro-vmarc-som.dtsi | 333 +++++++++
22 files changed, 1632 insertions(+), 825 deletions(-)
create mode 100644 arch/arm/boot/dts/rockchip-radxa-dalang-carrier.dtsi
create mode 100644 arch/arm64/boot/dts/rockchip/rk3399-rockpro64-v2.dts
create mode 100644 arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi
create mode 100644 arch/arm64/boot/dts/rockchip/rk3399pro-rock-pi-n10.dts
create mode 100644 arch/arm64/boot/dts/rockchip/rk3399pro-vmarc-som.dtsi
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
prev parent reply other threads:[~2020-01-09 21:40 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-01-09 21:39 [GIT PULL 1/2] Rockchip dt32 for 5.6 Heiko Stuebner
2020-01-09 21:40 ` Heiko Stuebner [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5115625.yBEeHQkg2z@phil \
--to=heiko@sntech.de \
--cc=arm@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=soc@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).