From mboxrd@z Thu Jan 1 00:00:00 1970 From: vipulkumar.samar@st.com (vipul kumar samar) Date: Wed, 13 Mar 2013 11:34:05 +0530 Subject: [PATCH v2 00/13] ARM: spear multiplatform support In-Reply-To: References: <1363106816-9603-1-git-send-email-arnd@arndb.de> Message-ID: <514016D5.10808@st.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On 3/13/2013 11:29 AM, Viresh Kumar wrote: > On Wed, Mar 13, 2013 at 12:46 AM, Arnd Bergmann wrote: >> This is the second time I post the SPEAr multiplatform patches. >> It did not work out for 3.9, mostly because of conflicts against >> patches in the DMA tree, but also because I did not push very >> hard for these. The patches are basically unchanged now, just >> some context differences since I rebased them on top of 3.9-rc2. >> >> I'm adding them to the arm-soc tree for 3.10 now. If there are >> any bugs, let's fix them on top of this branch. It would be >> good to get some more testing on the branch though. > > I thought i would meet you at Connect, but last time i didn't come and > this time you :) > > Anyways thanks for all the good work you have done for SPEAr. These > are already Acked by me > > @Vipul: Can you give these a try? Please consider following which we got > from the last discussion: ohk, i'll test this patch set and update you ASAP. > > From: Arnd... > > Thanks for testing out the patches. I forgot about the loadaddress, > which indeed does not get set for multiplatform kernels, because > the kernel does not know the correct address when it depends on > the platform you are booting on. > > The recommended solution for this is to boot a normal 'vmlinux' > or 'zImage' file rather than a uImage file. If you u-boot version > is too old for that and you cannot update, you can manually > call 'mkimage' to create a uImage file with the correct load > address. Ohk. Regards Vipul Samar