From: nicolas.ferre@atmel.com (Nicolas Ferre)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 2/3] ARM: at91: rename board-dt to more specific name board-dt-sam9
Date: Wed, 13 Mar 2013 17:32:35 +0100 [thread overview]
Message-ID: <5140AA23.6070201@atmel.com> (raw)
In-Reply-To: <51408A5D.6020402@atmel.com>
On 03/13/2013 03:17 PM, Nicolas Ferre :
> On 03/07/2013 03:21 PM, Jean-Christophe PLAGNIOL-VILLARD :
>> as we will introduce the Cortex-A5 sama5 support
>
> We may need more arguments here (Cf. discussion about the sama5d3
> support). Let's discuss this and modify this commit message quickly.
Queued to at91-3.10-soc with following commit message:
"
We will produce a board-dt file per SoC core type. That will ease code
readability and will prevent from including superfluous code for supporting
machines that will never be compiled together (particularly the ARM9 and C-A5
upcoming SoCs).
"
Thanks, best regards,
>> Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
>> Cc: Ludovic Desroches <ludovic.desroches@atmel.com>
>> Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
>> ---
>> arch/arm/configs/at91_dt_defconfig | 2 +-
>> arch/arm/configs/at91sam9260_defconfig | 2 +-
>> arch/arm/configs/at91sam9g20_defconfig | 2 +-
>> arch/arm/configs/at91sam9g45_defconfig | 2 +-
>> arch/arm/mach-at91/Kconfig | 2 +-
>> arch/arm/mach-at91/Makefile | 2 +-
>> arch/arm/mach-at91/{board-dt.c => board-dt-sam9.c} | 0
>> 7 files changed, 6 insertions(+), 6 deletions(-)
>> rename arch/arm/mach-at91/{board-dt.c => board-dt-sam9.c} (100%)
>>
>> diff --git a/arch/arm/configs/at91_dt_defconfig b/arch/arm/configs/at91_dt_defconfig
>> index 1ea9590..047f2a4 100644
>> --- a/arch/arm/configs/at91_dt_defconfig
>> +++ b/arch/arm/configs/at91_dt_defconfig
>> @@ -20,7 +20,7 @@ CONFIG_SOC_AT91SAM9263=y
>> CONFIG_SOC_AT91SAM9G45=y
>> CONFIG_SOC_AT91SAM9X5=y
>> CONFIG_SOC_AT91SAM9N12=y
>> -CONFIG_MACH_AT91SAM_DT=y
>> +CONFIG_MACH_AT91SAM9_DT=y
>> CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
>> CONFIG_AT91_TIMER_HZ=128
>> CONFIG_AEABI=y
>> diff --git a/arch/arm/configs/at91sam9260_defconfig b/arch/arm/configs/at91sam9260_defconfig
>> index 0ea5d2c..05618eb 100644
>> --- a/arch/arm/configs/at91sam9260_defconfig
>> +++ b/arch/arm/configs/at91sam9260_defconfig
>> @@ -22,7 +22,7 @@ CONFIG_MACH_QIL_A9260=y
>> CONFIG_MACH_CPU9260=y
>> CONFIG_MACH_FLEXIBITY=y
>> CONFIG_MACH_SNAPPER_9260=y
>> -CONFIG_MACH_AT91SAM_DT=y
>> +CONFIG_MACH_AT91SAM9_DT=y
>> CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
>> # CONFIG_ARM_THUMB is not set
>> CONFIG_ZBOOT_ROM_TEXT=0x0
>> diff --git a/arch/arm/configs/at91sam9g20_defconfig b/arch/arm/configs/at91sam9g20_defconfig
>> index 3b18810..892e828 100644
>> --- a/arch/arm/configs/at91sam9g20_defconfig
>> +++ b/arch/arm/configs/at91sam9g20_defconfig
>> @@ -22,7 +22,7 @@ CONFIG_MACH_PCONTROL_G20=y
>> CONFIG_MACH_GSIA18S=y
>> CONFIG_MACH_USB_A9G20=y
>> CONFIG_MACH_SNAPPER_9260=y
>> -CONFIG_MACH_AT91SAM_DT=y
>> +CONFIG_MACH_AT91SAM9_DT=y
>> CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
>> # CONFIG_ARM_THUMB is not set
>> CONFIG_AEABI=y
>> diff --git a/arch/arm/configs/at91sam9g45_defconfig b/arch/arm/configs/at91sam9g45_defconfig
>> index 606d48f..5f551b7 100644
>> --- a/arch/arm/configs/at91sam9g45_defconfig
>> +++ b/arch/arm/configs/at91sam9g45_defconfig
>> @@ -18,7 +18,7 @@ CONFIG_MODULE_UNLOAD=y
>> CONFIG_ARCH_AT91=y
>> CONFIG_ARCH_AT91SAM9G45=y
>> CONFIG_MACH_AT91SAM9M10G45EK=y
>> -CONFIG_MACH_AT91SAM_DT=y
>> +CONFIG_MACH_AT91SAM9_DT=y
>> CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
>> CONFIG_AT91_SLOW_CLOCK=y
>> CONFIG_AEABI=y
>> diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
>> index 98c2e05..440682b 100644
>> --- a/arch/arm/mach-at91/Kconfig
>> +++ b/arch/arm/mach-at91/Kconfig
>> @@ -108,7 +108,7 @@ config MACH_AT91RM9200_DT
>> Select this if you want to experiment device-tree with
>> an Atmel RM9200 Evaluation Kit.
>>
>> -config MACH_AT91SAM_DT
>> +config MACH_AT91SAM9_DT
>> bool "Atmel AT91SAM Evaluation Kits with device-tree support"
>> depends on SOC_AT91SAM9
>> select USE_OF
>> diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile
>> index 39218ca..5eca35a 100644
>> --- a/arch/arm/mach-at91/Makefile
>> +++ b/arch/arm/mach-at91/Makefile
>> @@ -88,7 +88,7 @@ obj-$(CONFIG_MACH_AT91SAM9M10G45EK) += board-sam9m10g45ek.o
>>
>> # AT91SAM board with device-tree
>> obj-$(CONFIG_MACH_AT91RM9200_DT) += board-rm9200-dt.o
>> -obj-$(CONFIG_MACH_AT91SAM_DT) += board-dt.o
>> +obj-$(CONFIG_MACH_AT91SAM9_DT) += board-dt-sam9.o
>>
>> # AT91X40 board-specific support
>> obj-$(CONFIG_MACH_AT91EB01) += board-eb01.o
>> diff --git a/arch/arm/mach-at91/board-dt.c b/arch/arm/mach-at91/board-dt-sam9.c
>> similarity index 100%
>> rename from arch/arm/mach-at91/board-dt.c
>> rename to arch/arm/mach-at91/board-dt-sam9.c
>>
>
>
--
Nicolas Ferre
next prev parent reply other threads:[~2013-03-13 16:32 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-03-07 13:08 [PULL PATCH 0/3] ARM: at91: Kconfig cleanup for prepare add of Cortex-A5 Sama5 Jean-Christophe PLAGNIOL-VILLARD
2013-03-07 14:21 ` [PATCH 1/3] ARM: at91: move non DT Kconfig to Kconfig.non_dt Jean-Christophe PLAGNIOL-VILLARD
2013-03-07 14:21 ` [PATCH 2/3] ARM: at91: rename board-dt to more specific name board-dt-sam9 Jean-Christophe PLAGNIOL-VILLARD
2013-03-13 14:17 ` Nicolas Ferre
2013-03-13 16:32 ` Nicolas Ferre [this message]
2013-03-07 14:21 ` [PATCH 3/3] ARM: at91: renamme rm9200 dt file Jean-Christophe PLAGNIOL-VILLARD
2013-03-13 14:22 ` Nicolas Ferre
2013-03-13 16:30 ` Nicolas Ferre
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5140AA23.6070201@atmel.com \
--to=nicolas.ferre@atmel.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).