From: nicolas.ferre@atmel.com (Nicolas Ferre)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 3/3] ARM: at91: add MPA 1600 DT board
Date: Fri, 15 Mar 2013 11:58:56 +0100 [thread overview]
Message-ID: <5142FEF0.6070308@atmel.com> (raw)
In-Reply-To: <CAGhQ9Vx9D_4LnXOgveQ_vnTa-QfgwTkuLrU=_Et1Z2fD_hDCNg@mail.gmail.com>
On 02/08/2013 04:56 PM, Joachim Eastwood :
> On 8 February 2013 04:19, Kumar, Anil <anilkumar.v@ti.com> wrote:
>> On Fri, Feb 08, 2013 at 06:55:56, Joachim Eastwood wrote:
>>> Signed-off-by: Joachim Eastwood <manabian@gmail.com>
>>> ---
>>> arch/arm/boot/dts/Makefile | 1 +
>>> arch/arm/boot/dts/mpa1600.dts | 71 +++++++++++++++++++++++++++++++++++++++++++
>>> 2 files changed, 72 insertions(+)
>>> create mode 100644 arch/arm/boot/dts/mpa1600.dts
>>>
>>> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
>>> index 5ebb44f..8bfb5f3 100644
>>> --- a/arch/arm/boot/dts/Makefile
>>> +++ b/arch/arm/boot/dts/Makefile
>>> @@ -3,6 +3,7 @@ ifeq ($(CONFIG_OF),y)
>>> # Keep at91 dtb files sorted alphabetically for each SoC
>>> # rm9200
>>> dtb-$(CONFIG_ARCH_AT91) += at91rm9200ek.dtb
>>> +dtb-$(CONFIG_ARCH_AT91) += mpa1600.dtb
>>> # sam9260
>>> dtb-$(CONFIG_ARCH_AT91) += animeo_ip.dtb
>>> dtb-$(CONFIG_ARCH_AT91) += aks-cdu.dtb
>>> diff --git a/arch/arm/boot/dts/mpa1600.dts b/arch/arm/boot/dts/mpa1600.dts
>>> new file mode 100644
>>> index 0000000..927972a
>>> --- /dev/null
>>> +++ b/arch/arm/boot/dts/mpa1600.dts
>>> @@ -0,0 +1,71 @@
>>> +/*
>>> + * mpa1600.dts - Device Tree file for Phontech MPA 1600
>>> + *
>>> + * Copyright (C) 2013 Joachim Eastwood <manabian@gmail.com>
>>> + *
>>> + * Licensed under GPLv2 only
>>> + */
>>> +/dts-v1/;
>>> +/include/ "at91rm9200.dtsi"
>>> +
>>> +/ {
>>> + model = "Phontech MPA 1600";
>>> + compatible = "phontech,mpa1600", "atmel,at91rm9200";
>>> +
>>> + memory {
>>> + reg = <0x20000000 0x4000000>;
>>> + };
>>> +
>>> + clocks {
>>> + #address-cells = <1>;
>>> + #size-cells = <1>;
>>> + ranges;
>>> +
>>> + main_clock: clock at 0 {
>>> + compatible = "atmel,osc", "fixed-clock";
>>> + clock-frequency = <18432000>;
>>> + };
>>> + };
>>> +
>>> + ahb {
>>> + apb {
>>> + dbgu: serial at fffff200 {
>>> + status = "okay";
>>> + };
>>> +
>>> + macb0: ethernet at fffbc000 {
>>> + phy-mode = "rmii";
>>> + status = "okay";
>>> + };
>>> +
>>> + ssc0: ssc at fffd0000 {
>>> + status = "okay";
>>> + };
>>> +
>>> + ssc1: ssc at fffd4000 {
>>> + status = "okay";
>>> + };
>>> + };
>>> +
>>> + usb0: ohci at 00300000 {
>>> + num-ports = <1>;
>>> + status = "okay";
>>> + };
>>> + };
>>> +
>>> + i2c at 0 {
>>> + status = "okay";
>>> + };
>>> +
>>> + gpio_keys {
>>> + compatible = "gpio-keys";
>>> + #address-cells = <1>;
>>> + #size-cells = <0>;
>>
>> No need to use these address-cells and size-cells properties as
>> child DT node is not Using. Please see the discussion on link
>>
>> http://www.mail-archive.com/linux-samsung-soc at vger.kernel.org/msg15590.html
>
> I see.
>
> Thanks for the feedback. I'll update this patch in the series.
I have modified it and queued the whole series in the:
at91-3.10-dt branch.
> I assume someone will clean up all the other dts files or we'll never
> get rid of these properties as people will copy-paste stuff.
Just done in a new patch:
[PATCH] ARM: at91/dt: gpio-keys: remove address-cells and size-cells
properties
Best regards,
--
Nicolas Ferre
prev parent reply other threads:[~2013-03-15 10:58 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-02-08 1:25 [PATCH 0/3] RM9200 DT i2c bindings and MPA 1600 support Joachim Eastwood
2013-02-08 1:25 ` [PATCH 1/3] ARM: at91: add TWI bindings to RM9200 DT Joachim Eastwood
2013-02-08 1:25 ` [PATCH 2/3] ARM: at91: add pinctrl nodes to i2c-gpio on RM92000 DT Joachim Eastwood
2013-02-08 1:25 ` [PATCH 3/3] ARM: at91: add MPA 1600 DT board Joachim Eastwood
2013-02-08 3:19 ` Kumar, Anil
2013-02-08 15:56 ` Joachim Eastwood
2013-03-15 10:37 ` [PATCH] ARM: at91/dt: gpio-keys: remove address-cells and size-cells properties Nicolas Ferre
2013-03-15 10:58 ` Nicolas Ferre [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5142FEF0.6070308@atmel.com \
--to=nicolas.ferre@atmel.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).