[PATCH v2 13/14] ARM: mvebu: Add thermal support to Armada 370 device tree

[sergei.shtylyov@cogentembedded.com (Sergei Shtylyov)]

On 23-03-2013 18:20, Sergei Shtylyov wrote:

>>> This patch adds support for the thermal controller available in
>>> all Armada 370 boards. This controller has two 4-byte registers:
>>> one to read the thermal sensor, the other for sensor initialization.

>>> Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
>>> ---
>>> This patch depends on the patch to add Armada 370 support
>>> in the mvebu_thermal driver:
>>> 'thermal: mvebu: Add support for Armada 370 thermal sensor'

>>>   arch/arm/boot/dts/armada-370.dtsi |    6 ++++++
>>>   1 files changed, 6 insertions(+), 0 deletions(-)

>>> diff --git a/arch/arm/boot/dts/armada-370.dtsi
>>> b/arch/arm/boot/dts/armada-370.dtsi
>>> index 8188d13..5831994 100644
>>> --- a/arch/arm/boot/dts/armada-370.dtsi
>>> +++ b/arch/arm/boot/dts/armada-370.dtsi
>>> @@ -153,5 +153,11 @@
>>>               clocks = <&coreclk 0>;
>>>           };
>>>
>>> +        thermal at d0018300 {
>>> +            compatible = "marvell,armada370-thermal";
>>> +            reg = <0xd0018300 0x4
>>> +                   0xd0018304 0x4>;

>>     As the two registers are adjacent to each other, why have two register
>> regions ISO one?

>     Ah, I just saw the previous patch where the registers are not adjacent and
> it became clear why.

    However, the "compatible" properties are different...

WBR, Sergei