From mboxrd@z Thu Jan  1 00:00:00 1970
From: dgilbert@interlog.com (Douglas Gilbert)
Date: Fri, 29 Mar 2013 12:39:02 -0400
Subject: [RFC 5/5] rtc-at91rm9200: add support for at91sam9x5
In-Reply-To: <1364573029-19346-5-git-send-email-jhovold@gmail.com>
References: <1364573029-19346-1-git-send-email-jhovold@gmail.com>
 <1364573029-19346-5-git-send-email-jhovold@gmail.com>
Message-ID: <5155C3A6.4060109@interlog.com>
To: linux-arm-kernel@lists.infradead.org
List-Id: linux-arm-kernel.lists.infradead.org

On 13-03-29 12:03 PM, Johan Hovold wrote:
> Add support for the at91sam9x5-family which must use the shadow
> interrupt mask due to a hardware issue.
> ---
>   drivers/rtc/rtc-at91rm9200.c | 8 ++++++++
>   1 file changed, 8 insertions(+)
>
> diff --git a/drivers/rtc/rtc-at91rm9200.c b/drivers/rtc/rtc-at91rm9200.c
> index 2921866..f3e351f 100644
> --- a/drivers/rtc/rtc-at91rm9200.c
> +++ b/drivers/rtc/rtc-at91rm9200.c
> @@ -318,12 +318,20 @@ static irqreturn_t at91_rtc_interrupt(int irq, void *dev_id)
>   static const struct at91_rtc_config at91rm9200_config = {
>   };
>
> +static const struct at91_rtc_config at91sam9x5_config = {
> +	.use_shadow_imr = true,
> +};
> +
>   #if defined(CONFIG_OF)
>   static const struct of_device_id at91_rtc_dt_ids[] = {
>   	{
>   		.compatible = "atmel,at91rm9200-rtc",
>   		.data = &at91rm9200_config,
>   	},
> +	{
> +		.compatible = "atmel,at91sam9x5-rtc",
> +		.data = &at91sam9x5_config,
> +	},
>   		/* terminator */
>   	}
>   };
>

Johan,
Looks good.

Plus add something like this to at91sam9x5.dtsi after the
i2c at 2 entry (at the end):

         rtc {
                 compatible = "atmel,at91sam9x5-rtc";
                 reg = <0xfffffeb0 0x40>;
                 interrupts = <1 4 7>;
                 status = "disabled";
         };


and an "enabler" in ariag25.dts (and perhaps other members
of the 9x5 sub-family), also at the end:

         rtc {
                 status = "okay";
         };

My patches are in Robert Nelson's tree at:
    http://www.eewiki.net/display/linuxonarm/AT91SAM9x5
in the Linux kernel section. My RTC code amounts to the same
thing as you are proposing, without the safety code around
the IMR shadow.

I provide binaries based on that work to Aria G25 users
via a google group. No-one has complained about RTC not
working. SPI and I2C problems are on-going but gradually
being sorted. Hence I know people are using and testing
this code, other than me.

Doug Gilbert