From mboxrd@z Thu Jan 1 00:00:00 1970 From: nicolas.ferre@atmel.com (Nicolas Ferre) Date: Sat, 30 Mar 2013 08:15:53 +0100 Subject: [PATCH v3 5/7] USB: EHCI: make ehci-atmel a separate driver In-Reply-To: References: Message-ID: <51569129.8020106@atmel.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On 03/29/2013 09:02 PM, Alan Stern : > On Thu, 28 Mar 2013, Arnd Bergmann wrote: > >> From: Manjunath Goudar >> >> Separate the Atmel host controller driver from ehci-hcd host code >> so that it can be built as a separate driver module. >> This work is part of enabling multi-platform kernels on ARM; >> however, note that other changes are still needed before Atmel can be >> booted with a multi-platform kernel. This is currently planned for >> Linux-3.11. >> >> With the infrastructure added by Alan Stern in patch 3e0232039 >> "USB: EHCI: prepare to make ehci-hcd a library module", we can >> avoid this problem by turning a bus glue into a separate >> module, as we do here for the Atmel bus glue. > > Generally okay. > >> diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig >> index 01c1acb..8c564aa 100644 >> --- a/drivers/usb/host/ehci-atmel.c >> +++ b/drivers/usb/host/ehci-atmel.c I missed the patch itself but I reviewed it on the mailing-list archive. So, here is my: Acked-by: Nicolas Ferre Thanks a lot for having taking care of this driver. Best regards, >> @@ -15,6 +15,19 @@ >> #include >> #include >> #include >> +#include >> +#include >> +#include >> +#include >> +#include >> +#include > > While not absolutely necessary, it would be nice to have the #include > files in alphabetical order. > >> + >> +#include "ehci.h" >> + >> +#define DRIVER_DESC "EHCI atmel driver" > > "atmel" should have a capital 'A'. > > Alan Stern > > > -- Nicolas Ferre