From mboxrd@z Thu Jan  1 00:00:00 1970
From: sebastian.hesselbarth@gmail.com (Sebastian Hesselbarth)
Date: Mon, 08 Apr 2013 08:11:38 +0200
Subject: [v5] clk: add si5351 i2c common clock driver
In-Reply-To: <20130408001725.GA16648@roeck-us.net>
References: <1365139415-17815-1-git-send-email-sebastian.hesselbarth@gmail.com>
 <20130407225046.GA16326@roeck-us.net> <51620604.4070204@gmail.com>
 <20130408001725.GA16648@roeck-us.net>
Message-ID: <51625F9A.1050308@gmail.com>
To: linux-arm-kernel@lists.infradead.org
List-Id: linux-arm-kernel.lists.infradead.org

On 04/08/2013 02:17 AM, Guenter Roeck wrote:
> On Mon, Apr 08, 2013 at 01:49:24AM +0200, Sebastian Hesselbarth wrote:
>> On 04/08/2013 12:50 AM, Guenter Roeck wrote:
>>> On Fri, Apr 05, 2013 at 05:23:35AM -0000, Sebastian Hesselbarth wrote:
>>>> This patch adds a common clock driver for Silicon Labs Si5351a/b/c
>>>> i2c programmable clock generators. Currently, the driver supports
>>>> DT kernels only and VXCO feature of si5351b is not implemented. DT
>>>> bindings selectively allow to overwrite stored Si5351 configuration
>>>> which is very helpful for clock generators with empty eeprom
>>>> configuration. Corresponding device tree binding documentation is
>>>> also added.
>>>>
>>>> Signed-off-by: Sebastian Hesselbarth<sebastian.hesselbarth@gmail.com>
>>>> Tested-by: Daniel Mack<zonque@gmail.com>
>>>>
>>> [ ... ]
>>>
>>>> +static inline void _si5351_msynth_set_pll_master(
>>>> +	struct si5351_driver_data *drvdata, unsigned char num, int is_master)
>>>> +{
>>>> +	unsigned long flags;
>>>> +
>>>> +	if (num>   8 ||
>>>> +	    (drvdata->variant == SI5351_VARIANT_A3&&   num>   3))
>>>> +		return;
>>>> +
>>>> +	flags = __clk_get_flags(drvdata->msynth[num].hw.clk);
>>>> +	if (is_master)
>>>> +		flags |= CLK_SET_RATE_PARENT;
>>>> +	else
>>>> +		flags&= ~CLK_SET_RATE_PARENT;
>>>> +	__clk_set_flags(drvdata->msynth[num].hw.clk, flags);
>>>> +}
>>>> +
>>> Unless I am missing something, neither __clk_get_flags() nor the new
>>> __clk_set_flags is exported.
>>>
>>> Did you try to build and load the driver as module ?
>>
>> Well, good catch. I didn't try to build v5 as a module, but I guess it
>> will fail. But I consider this as something that has to be addressed in
>> clk framework itself, not in this patch. There will be other
>> clk-providers built as module in the future for sure.
>>
> Sure, but you provided the patch to make __clk_set_flags global. To avoid
> build failures, I would suggest to either submit a patch to export the
> missing functions, or to remove the ability to build the driver as module.

Actually, I knew that __clk_set_flags patch will not be accepted before 
posting it ;)

> On a side note, do you happen to know anyone working on drivers for Si5319 or
> Si5368 ?

No.

> Thanks,
> Guenter