[PATCH] ARM: tegra: Add charger subnode to tps65090 node

[swarren@wwwdotorg.org (Stephen Warren)]

On 04/11/2013 09:38 AM, Rhyland Klein wrote:
> On 4/10/2013 6:30 PM, Stephen Warren wrote:
>> On 04/10/2013 01:51 PM, Rhyland Klein wrote:
>>> The charger is now represented by a distinct subnode of the tps65090
>>> device. Add this node and enable low current charging with it.
>>
>>> diff --git a/arch/arm/boot/dts/tegra114-dalmore.dts b/arch/arm/boot/dts/tegra114-dalmore.dts
>>
>>> +			charger {
>>> +				compatible = "ti,tps65090-charger";
>>> +				ti,enable-low-current-chrg;
>>
>> So does the TPS65090 driver scan all its sub-nodes like a bus an
>> instantiate anything? That's a little odd since the regulators node is
>> at the same level, yet doesn't represent a device on that same internal
>> bus...
>>
> 
> It doesn't scan so much as have a list of subdev's it tries to register.
> The charger node uses the of_compatible string defined (in the tps65090
> driver and the charger driver) to match the subnode to the mfd_cell
> device for the charger.

That sounds very odd. If the main driver hard-codes the list of children
it expects, there's no point using compatible for the children. Using a
bus-structure and compatible values would only be appropriate when the
top-level driver is generic, and simply scans all its children as a
generic bus, without having any idea what's there.

> The regulators are currently under a different
> subdevice which is not using the of_compatible string. I was planning on
> a follow up patch series to update the tps65090-regulator driver to use
> the dt type approach with a subnode to be consistent.

But that's changing the DT bindings. That shouldn't be done.