From: sboyd@codeaurora.org (Stephen Boyd)
To: linux-arm-kernel@lists.infradead.org
Subject: [RFC PATCH] drivers: bus: add ARM CCI support
Date: Thu, 18 Apr 2013 10:20:48 -0700 [thread overview]
Message-ID: <51702B70.9000908@codeaurora.org> (raw)
In-Reply-To: <1365691679-28674-2-git-send-email-lorenzo.pieralisi@arm.com>
On 04/11/13 07:47, Lorenzo Pieralisi wrote:
> diff --git a/drivers/bus/arm-cci.c b/drivers/bus/arm-cci.c
> new file mode 100644
> index 0000000..81953de
> --- /dev/null
> +++ b/drivers/bus/arm-cci.c
[...]
> +static void notrace cci_port_control(unsigned int port, bool enable)
> +{
> + void __iomem *base = ports[port].base;
> +
> + if (!base)
> + return;
> +
> + writel_relaxed(enable, base + CCI_PORT_CTRL);
> + while (readl_relaxed(cci_ctrl_base + CCI_CTRL_STATUS) & 0x1)
> + ;
cpu_relax()?
> +}
[...]
> +int notrace __cci_control_port_by_device(struct device_node *np, bool enable)
> +{
> + int port = cci_ace_lite_port(np);
> + if (WARN_ONCE(port < 0,
> + "ACE lite port look-up failure, node %p\n", np))
> + return -ENODEV;
> + cci_port_control(port, enable);
> + return 0;
> +}
> +EXPORT_SYMBOL_GPL(__cci_control_port_by_device);
> +
> +static const struct of_device_id arm_cci_matches[];
Why not just put the definition here then?
> +
> +static int __init cci_driver_probe(struct platform_device *pdev)
You probably want to drop the __init considering device hotplug is not
optional anymore.
> +{
> + const struct of_device_id *match;
> + struct cci_nb_ports const *cci_config;
> + int ret, j, i, nb_ace = 0, nb_ace_lite = 0;
> + struct device_node *np, *cp;
> + const char *match_str;
> +
> + match = of_match_device(arm_cci_matches, &pdev->dev);
> +
> + if (!match)
> + return -ENODEV;
It would be nice if we could get the data field from the of_device_id
without doing the search again. Can we update the of_platform code to
assign some field that you can get from the platform device?
> +
> + cci_config = (struct cci_nb_ports const *)match->data;
> + nb_cci_ports = cci_config->nb_ace + cci_config->nb_ace_lite;
> + ports = kzalloc(sizeof(*ports) * nb_cci_ports, GFP_KERNEL);
kcalloc()?
> + if (!ports)
> + return -ENOMEM;
> +
> + np = pdev->dev.of_node;
> + cci_ctrl_base = of_iomap(np, 0);
This is a platform driver so we should use non-of functions to map,
platform_get_resource()/ioremap(), etc.
> +}
> +
> +static int __exit cci_driver_remove(struct platform_device *pdev)
> +{
You probably want to drop the __exit here too.
> diff --git a/include/linux/arm-cci.h b/include/linux/arm-cci.h
> new file mode 100644
> index 0000000..e9514a2
> --- /dev/null
> +++ b/include/linux/arm-cci.h
> @@ -0,0 +1,44 @@
> +
> +#ifndef __LINUX_ARM_CCI_H
> +#define __LINUX_ARM_CCI_H
> +
> +#include <linux/errno.h>
> +#include <linux/of.h>
> +#include <linux/types.h>
You can declare
struct device_node;
here to avoid including linux/of.h. Less includes means less circular
dependencies.
> +
> +#ifdef CONFIG_ARM_CCI
> +extern int cci_disable_port_by_cpu(u64 mpidr);
> +extern int __cci_control_port_by_device(struct device_node *np, bool enable);
> +#else
> +static inline int cci_disable_port_by_cpu(u64 mpidr) { return -ENODEV; }
> +static inline int __cci_control_port_by_device(struct device_node *np,
> + bool enable)
> +{
> + return -ENODEV;
> +}
>
--
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
hosted by The Linux Foundation
next prev parent reply other threads:[~2013-04-18 17:20 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-04-11 14:47 [RFC PATCH] ARM CCI support Lorenzo Pieralisi
2013-04-11 14:47 ` [RFC PATCH] drivers: bus: add " Lorenzo Pieralisi
2013-04-18 17:20 ` Stephen Boyd [this message]
2013-04-18 17:54 ` Nicolas Pitre
2013-04-18 18:11 ` Stephen Boyd
2013-04-22 14:24 ` Russell King - ARM Linux
2013-04-22 15:18 ` Nicolas Pitre
2013-04-19 11:21 ` Lorenzo Pieralisi
2013-04-23 13:52 ` Jon Medhurst (Tixy)
2013-04-23 14:27 ` Lorenzo Pieralisi
2013-04-23 16:28 ` Dave Martin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=51702B70.9000908@codeaurora.org \
--to=sboyd@codeaurora.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).